Brydge 12.9 Pro+ User Manual

Power

To Turn On: Press the power key for one second until the LED flashes green.

To Turn Off: Press and hold the power key for three seconds until the LED flashes red.

Note: The Brydge Pro+ includes Instant-On™, which means that reconnecting no longer takes seconds. Once paired, your keyboard will instantly connect to your iPad for up to 4 hours before entering sleep mode without impacting power consumption.

Pairing

To Pair: Press and hold the Bluetooth key for three seconds until the LED flashes blue. On your iPad, under Settings > Bluetooth, select Brydge Pro+.

When successfully paired, the blue LED will turn off and your keyboard and trackpad will be active.

Update Firmware

Download Brydge Connect from the App Store for the latest firmware updates.

Settings

Assistive Touch settings must be off for gestures to work properly. To do this, go to iPad Settings > Accessibility > Touch > Assistive Touch > OFF.

Trackpad Gestures

Open Today View

Use two fingers to swipe right. [→]

Zoom in and out

Pinch open to zoom in, or pinch closed to zoom out. [?]

Switch between open apps

Swipe left or right with three fingers. [←/→]

Open the App Switcher

Swipe up with three fingers, pausing before you lift your fingers. [↑]

Scroll Up or Down

Swipe two fingers up or down. [↑↓]

Scroll Left or Right

Swipe two fingers left or right. [←→]

Go Home

Use one finger to swipe the pointer past the bottom of the screen. [?]

Open Control Center

Use one finger to swipe to the top right corner. [↗️]

Open Search

Swipe down with two fingers. [↓]

Insert/Remove

Important

Remove non-Brydge screen protectors before attaching your Brydge keyboard. This will ensure a perfect fit and eliminate unnecessary pressure to your screen when inserted into the hinges.

To Insert:

Place your Brydge on a flat surface and set the hinges upright to 90 degrees. Insert your iPad into the hinges with the home button on the right, one side at a time.

If your iPad is loose, remove it and gently squeeze the hinges. Repeat this process until your iPad is held firmly.

To Remove:

Ensure your Brydge is on a flat surface. Place your hand towards the back of the keyboard and pull up, one side at a time.

Magnetic Cover

Magnetic cover is located in the bottom of the packaging.

Charge

To Check Battery Life: In Today View, go to the BATTERIES section to check battery life. If not available, swipe left on your Home Screen to show Today View, scroll to the bottom and click edit. Scroll down to Batteries, and click the green '+' icon to add.

Note: If battery life is below 15%, backlit key functionality will be disabled to conserve battery.

To Charge: Insert the charging cable into the keyboard and plug the other end into a power source. A solid red LED indicates the Brydge is charging. When the keyboard is fully charged, the red LED will turn off. A full charge can take up to three hours.

Keyboard Shortcuts

Warranty

Thank you for purchasing a Brydge product. This product comes with a 1-year limited hardware warranty on the terms and conditions set out in this document and at www.brydge.com/warranty. All Brydge warranties are non-transferrable and are only available to the original end-user of the product. Warranties do not apply to products purchased from online vendors unauthorized to sell Brydge-branded product. If a defect arises during the warranty period, cease using the product and contact Brydge. To obtain warranty service, visit www.brydge.com/support or call +1 (435) 604-0481. Brydge, at its sole discretion and option, will (1) repair the product at no charge using new parts or parts that are equivalent to new in performance and reliability, or (2) replace or exchange the product with a product of equivalent functionality and value. Brydge offers free return shipping on any approved warranty claims. A shipping label will be provided to you if you are within the United States. If you are outside the United States, Brydge will reimburse your return shipping to a maximum of US$15.00 after providing a copy of the shipping receipt.

Australia Only: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Brydge Technologies LLC | 1912 Sidewinder Dr., Suite 104, Park City, UT 84060 USA

HAVE A QUESTION? Visit www.brydge.com/support

Compliance and Legal Information

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

This Bluetooth keyboard (Brydge 12.9 MAX+. FCC ID: 2ADRG-BRY603, IC: 24378-BRY603) is compatible with the iPad Pro 12.9-inch (3rd generation) (FCC ID: BCGA1876/BGCA2014/BGCA1895, IC: 579C-A1876/579C-A2014/579C-A1895), iPad Pro 12.9-inch (4th generation) (FCC ID: BCGA2069/BGCA2232, IC: 579C-A2069/579C-A2232) and iPad Pro 12.9-inch (5th generation).

2021 Brydge. All Rights Reserved.

iPad and Apple are registered trademarks of Apple Inc., registered in the U.S. and other countries.

The Bluetooth word mark, and logos are owned by Bluetooth SIG, Inc. Use of such marks by Brydge is under license. Brydge is a trademark of Brydge Global Pte. Ltd. Other trademarks and tradenames are those of their respective owners.