Etac Relax Screw Kit

Product Description

This document provides assembly instructions for the Etac Relax screw kit.

Included Components

The kit contains: 3 screws, 3 wall plugs.

[Image: Illustration of three screws and three wall plugs.]

Mounting Instructions & Warnings

? Important Information: This screw set is exclusively intended for mounting the Etac Relax on wood/plywood or concrete walls. If mounting Etac Relax on other wall materials, use appropriate fixings that ensure the application can bear the maximum loads for which the product is designed (refer to the Etac Relax manual). Mounting and assessment of the wall's load-bearing capacity must be performed by a qualified person.

? Dimensions & Further Guidance: The dimensions provided in these instructions refer only to the hole dimensions. For all other dimensions or instructions, please consult the manual that accompanies the product, which can also be downloaded from www.etac.com.

Drilling & Installation Visuals

[Image: Diagram showing a drill bit with a diameter of 10 mm and a length of 75 mm, drilling into a wall surface.]

[Image: Diagram showing a wall plug inserted into a wall.]

Certifications

CE Marked, MD (Medical Device)