JJC SPC-R1 Wireless Remote Control and Smartphone Video Rig
Product Overview
The JJC SPC-R1 is a versatile accessory designed to enhance smartphone videography and photography. It combines a wireless remote control with a secure phone mounting system, offering stability and convenience for content creators.
Package Contents
- Phone Cage
- Magnetic Suction Cup
- Rubber Bands
- Wrist Strap
- Detachable Wireless Remote Control
- CR2025 Battery
- 3M Adhesive Metal Ring
- Transparent Protective Film
- Cleaning Wipes
- User Manual
Assembly and Setup
Wireless Remote Control Battery Installation
The wireless remote control is powered by a CR2025 battery.
- Slide open the battery cover on the back of the wireless remote control.
- Insert the included CR2025 battery with the "+" marking facing upwards.
- Replace the battery cover.
Attaching Handles to the Cage
The cage features cold shoe mounts for attaching handles.
- Slide the handles into the cold shoe mounts on either side of the cage. Ensure they are positioned parallel and evenly.
- Slide the handle's locking mechanism into the cold shoe slot.
- Clockwise rotate the handle locking knob until it is secured.
- Left and right handles must be installed on their respective sides; incorrect installation will result in gaps.
Attaching the Wireless Remote Control
The detachable wireless remote control can be mounted onto the cage.
- Insert the wireless remote control into the designated slot on the left or right handle.
Phone Mounting Options
The SPC-R1 supports various phone mounting configurations using its magnetic suction cup and optional accessories.
Magnetic Suction Cup Installation
- Place the rubber bands in the center of the cage, then place the magnetic suction cup on top of the rubber bands. The rubber bands provide extra security for your phone.
- Ensure the 1/4"-20 tripod socket on the back of the magnetic suction cup is accessible through the cage's opening.
Phone Attachment Methods
The magnetic suction cup is adjustable horizontally to keep the phone centered. It supports the following scenarios:
- Direct Magnetic Attachment: For devices with built-in MagSafe magnetic functionality (e.g., iPhone 12 series, iPhone 13 series, or newer models) when used without a case or with an official MagSafe case or other magnetic case.
- Using the 3M Adhesive Metal Ring: For devices with built-in MagSafe magnetic functionality (e.g., iPhone 12 series, iPhone 13 series, or newer models) when using a non-magnetic case. Attach the 3M adhesive metal ring to the case as per the separate installation guide.
- For Non-MagSafe Phones: For non-iPhone 12/13 series phones, or other models, use the 3M adhesive metal ring attached to the phone or its case.
For detailed instructions on installing the 3M adhesive metal ring, please refer to the separate installation guide included in the packaging.
Pairing the Wireless Remote Control with Your Smartphone
Connect your smartphone to the wireless remote control via Bluetooth for remote photo and video capture.
- On your smartphone, navigate to the settings and turn on Bluetooth.
- Press and hold the shutter button/video recording button on the wireless remote control for approximately 3 seconds to power it on. The indicator light on the remote will flash.
- Your smartphone will automatically search for devices. Select "HG-BT1" (the name of the remote control) to connect and pair.
- Once pairing is successful, press the shutter button/video recording button on the remote to take photos or record videos. Ensure your phone is set to the appropriate photo or video mode.
Connection Notes:
- After successful pairing, if you turn off the remote control but keep your smartphone's Bluetooth on, the remote will automatically reconnect on the next use without needing re-pairing.
- If you turn off both the remote control and your smartphone's Bluetooth after pairing, you will need to press and hold the shutter/video recording button for approximately 3 seconds to re-establish the Bluetooth connection.
- To pair the remote control with a different phone, first turn off Bluetooth on the previously paired phone or clear its pairing information to avoid connection issues.
You can disconnect the remote by turning off your smartphone's Bluetooth function.
Shooting Modes
The cage supports three shooting orientations: Horizontal, Vertical, and Handheld.
Horizontal Shooting (A)
- Hold the cage horizontally with the magnetic suction cup facing you.
- Ensure the handles and cold shoe mounts are positioned parallel and evenly. Slide the handles into the cold shoe slots.
- Clockwise rotate the handle locking knob until it is secured.
Vertical Shooting (B)
- Hold the cage vertically with the magnetic suction cup facing you.
- Ensure the handles and cold shoe mounts are positioned parallel and evenly. Slide the handles into the cold shoe slots.
- Clockwise rotate the handle locking knob until it is secured.
Handheld Shooting (C)
- Align one of the 1/4"-20 tripod sockets on a handle with the central 1/4"-20 tripod socket on the top of the cage, as shown in the diagram.
- Clockwise rotate the handle locking knob until it is secured.
Specifications
Phone Cage
| Item | Specifications |
|---|---|
| Category | ABS + Aluminum Alloy + Silicone + Acrylic |
| Length | 358mm |
| Height | 133mm |
| Magnetic Force | 2.3kg |
Wireless Remote Control
| Item | Specifications |
|---|---|
| Battery Type | CR2025 |
| Working Distance | Approx. 10m |
Special Reminders and Warnings
Wireless Remote Control Precautions
- Do not use any battery other than the one specified in the user manual.
- Do not insert the battery with the polarity reversed.
- If the remote control will not be used for an extended period, remove the battery.
- Keep batteries and battery covers out of reach of children and infants.
- Before using this product on an aircraft or in a hospital, confirm whether its use is permitted. The electromagnetic waves emitted by this product may interfere with aircraft instruments or medical equipment in hospitals.
- Do not place the remote control in high-temperature or humid environments.
- Do not use organic solvents or alcohol-based liquids to clean this product.
General Warnings
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
Compliance Information
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
RoHS Compliance
The following table indicates the presence of hazardous substances in product components, in compliance with GB/T 26572 standards.
| Component | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr6+) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Circuit Board Assembly | X | 0 | 0 | 0 | 0 | 0 |
| Metal Parts | X | 0 | 0 | 0 | 0 | 0 |
| Plastic Parts | 0 | 0 | 0 | 0 | 0 | 0 |
| Other Parts | 0 | 0 | 0 | 0 | 0 | 0 |
O: Indicates the content of the hazardous substance in all homogeneous materials of this component is below the limit requirement specified in GB/T 26572. X: Indicates the hazardous substance content in at least one homogeneous material of this component exceeds the limit requirement specified in GB/T 26572. The indicated environmentally friendly use period for this product is only applicable when the product operates under the conditions specified in the user manual.
This product still meets the restriction requirements of the EU RoHS Directive.
