eufy Security S380 HomeBase Quick Start Guide

At a Glance

The S380 HomeBase is a central hub for your eufy Security devices. It comes with 16GB of storage and can be expanded with an additional hard drive.

Key Features and Ports:

• Status LED
• Reset Hole
• Speaker
• Hard Drive Bracket
• SYNC / ALARM OFF Button
• USB Port 1 (Output: 5Vdc/2.4A)
• USB Port 2 (Output: 5Vdc/0.7A)
• Ethernet Port
• Power Port

Expanding Storage (Optional)

The S380 HomeBase includes 16GB of storage for video recordings and allows you to add an additional hard drive to expand the space.

Prepare Your Hard Drive

Your hard drive must meet the following requirements:

Important: Transfer all data from your hard drive to a secure location before adding it to the S380 HomeBase.

Install Your Hard Drive

Note: The S380 HomeBase must be powered off when you install or remove a hard drive.

1. Push down the top lid to remove it.
2. Loosen the screw, then pull out the hard drive bracket.
3. Fix your hard drive to the bracket with the provided screws.
4. Insert and screw the bracket back to S380 HomeBase, then put the top lid back into place.

You can follow the steps above to expand the storage whenever necessary. A new hard drive must be initialized through the eufy Security app to work with S380 HomeBase.

Connecting the S380 HomeBase

1. Power on and connect S380 HomeBase to your router.
2. Wait for a moment (up to 1 min) until the status LED turns blue.

Adding to the eufy Security App

1. Download and install the eufy Security app, and sign up for an account.
2. Add S380 HomeBase to your device list, and follow the in-app instructions to complete the setup.

Safety Information

• Do not use the device in environments with extreme temperatures (too high or too low). Never expose the device to strong sunshine or excessively humid environments.
• The suitable temperature range for the T8030 and its accessories is -10°C to 45°C.
• It is recommended to operate the device in an environment with a temperature between 5°C and 25°C.
• When powering the device, place it in an environment with normal room temperature and good ventilation.
• The adapter should be installed near the equipment and be easily accessible.
• Only use the adapter provided by the manufacturer. Using an unauthorized adapter may cause danger and void the device's authorization and warranty.
• This adapter is for indoor use only. The adapter type (for S380 HomeBase) is KA2401A-1202000DE, rated output voltage/current is 12 Vdc/2A. The plug is considered a disconnect device for the adapter.

Notices (Europe and United Kingdom)

This product complies with the radio interference requirements of the European Community and the United Kingdom.

Declaration of Conformity: Anker Innovations Limited declares that this device complies with Directive 2014/53/EU and Radio Equipment Regulations 2017 (SI 2017/1206). For the full declaration of conformity, visit: https://uk.eufylife.com.

RF Exposure Information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of 20 cm between the device and the human body. To maintain compliance, ensure a distance of at least 20 cm between the device and the human body during use.

Frequency Bands and Power:

Importer Information:

• EU: Anker Innovations Deutschland GmbH, Georg-Muche-Strasse 3, 80807 Munich, Germany
• UK: Anker Technology (UK) Limited, GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

Your product is designed and manufactured with high-quality materials and components that can be recycled and reused. Please dispose of this product responsibly by taking it to a designated collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment.