TYPES MOTORCYCLE TAIL-LIGHT

Package Contents

• 6" Weatherproof Motorcycle Tail-Light
• 48" Hardwire Cable

Technical Specifications

Working voltage: DC 12V Only

Maximum amperage draw: 1A at 12V

Installation

Step 1

Peel off the 3M VHB™ tape backer from the Tail-Light LED.

Step 2

Mount the Tail-Light LED on your desired location at the tail section of your motorcycle. Make sure the hardwire cable is on the left side.

Power

Hardwire the Tail-Light LED to your motorcycle's power source according to color code below for wire identification. Trigger the Left Signal Light / Right Signal Light / Brake Light to ensure the wires are connected correctly.

Wire Identification

• White wire: Running Light
• Brown wire: Brake light
• Yellow wire: Left signal light
• Green wire: Right signal light
• Black wire: Ground

Note: Refer to your vehicle's service manual for a wire schematic for correct wire placement or you can test the power sources using a multi-meter.

Testing Power Sources

Test Left Signal: [Diagram shows the left turn signal of the motorcycle's tail-light illuminated amber.]

Test Right Signal: [Diagram shows the right turn signal of the motorcycle's tail-light illuminated amber.]

Test Brake Light: [Diagram shows the main brake light of the motorcycle's tail-light illuminated red.]

Warnings

WARNING: Do not install or use product if it, in any way, impairs the safe operation of your vehicle. Follow manufacturer's instructions to ensure the product is properly & safely installed. Neither the manufacturer nor the reseller can be held responsible or liable for consequential, incidental, or indirect damages to either person or property resulting from the installation or improper use of this product. Check your state or provincial laws before installing.

This product is not DOT approved.

WARNING: This product can expose you to chemicals including DEHP and DINP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Optional Products

Optional Smart LED products also available to enhance your experience (sold separately).

48" Smart Lighting Deluxe Kit

Model: LM55369

[Image description: The interior of a car with ambient LED lighting in various colors. Two small, flexible LED light strips are displayed separately.]

72" Exterior Smart Lighting Kit

Model: LM55878

[Image description: A black car with vibrant, multi-colored LED lighting installed around its exterior, including underglow and wheel lights. Two small, flexible LED light strips are displayed separately.]

Contact Information

Have a comment or question❓

Email us at: info@typesauto.com

or visit us online at: www.typesauto.com

Winplus North America, Inc.

2975 Red Hill Ave., Ste. 100,

Costa Mesa, CA 92626

Tel: 1.866.294.9244

© 2019 Winplus North America, Inc.

All rights reserved.

3M VHB™ is a trademark of 3M Company.