Operation Instruction

1. Download eWeLink APP

Download the eWeLink APP for Android™ & iOS devices.

2. Power on

Upon powering on, the device enters quick pairing mode (Touch). The Wi-Fi indicator flashes quickly. The device will exit pairing mode if not paired within 3 minutes. To re-enter pairing mode, long press the configuration button for 5 seconds until the Wi-Fi indicator flashes quickly, then release.

3. Add the device

Method 1: Scan the code to add (recommended)

Tap "+" and select "Scan QR code". Scan the QR code on the card included in the package to add the device.

Method 2: Manual add

1. Set the device to pairing mode. Find the Wi-Fi SSID named "ITEAD-" followed by your device's unique ID on your mobile phone.
2. Go back to the "eWeLink" App, tap "+", select "Scan QR code". Tap the text "Scanning failed. Please enter device ID manually" at the bottom to enter the device ID. Tap "Next" and wait for the adding process to complete.

Specifications

Product Introduction

The SONOFF Micro is a portable mini USB smart adapter that transforms your USB devices into smart devices. It allows for remote on/off control of connected devices from anywhere, scheduling, and sharing control with family members.

Features

• Remote Control
• Single/Countdown Timing
• Voice Control
• Share Control
• Sync Status
• Camera Linking
• Power-on State
• Smart Scene

Switch Network

To change the network, long press the pairing button for 5 seconds until the Wi-Fi indicator flashes quickly. The device will enter pairing mode, allowing you to pair it again.

Factory Reset

Deleting the device from the eWeLink app restores it to its factory settings.

Common Problems

Q: Why is my device staying "Offline"?

Newly added devices require 1-2 minutes to connect to Wi-Fi and the network. If the device remains offline for an extended period, check the Wi-Fi indicator status:

1. Blue Wi-Fi indicator flashes quickly once per second: The device failed to connect to your Wi-Fi. Possible reasons include:
   • Incorrect Wi-Fi password entered.
   • Excessive distance between the device and the router, or environmental interference. Try moving the device closer to the router. If it still fails, try adding it again.
   • The 5GHz Wi-Fi network is not supported; only 2.4GHz wireless networks are supported.
   • MAC address filtering is enabled. Disable it.
   If these steps do not resolve the issue, try creating a Wi-Fi hotspot using your mobile phone's data network and add the device again.
2. Blue indicator quickly flashes twice per second: The device has connected to Wi-Fi but failed to connect to the server. Ensure your network connection is stable. Frequent double flashes indicate an unstable network, not a product issue. If the network is normal, try restarting the switch by turning off the power.