Tapo TC41 Outdoor Pan/Tilt Security Wi-Fi Camera User Guide

About This Guide

This guide provides a brief introduction to the Outdoor Pan/Tilt Security Wi-Fi Camera and the Tapo app, as well as regulatory information. Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Tapo Camera experience.

Conventions

In this guide, the following convention is used:

More Info

• Specifications can be found on the product page at https://www.tapo.com.
• Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.
• The setup video can be found at https://www.tp-link.com/support/setup-video/#cloud-cameras.

Introduction

The TC41 is a full-featured weatherproof security camera that you can access from anywhere. Receive instant notifications and check feeds when motion is detected. Moreover, the automatic siren system will trigger light and sound to frighten away unwanted visitors after the camera detects motion. Day or night, rain or shine, the Tapo camera protects what you love most.

• 2K Resolution, Full-Color Night Vision: Enhances your security by revealing highly-detailed images and vivid colors. Receive full-color live view even in total darkness with built-in spotlights.
• 360° Visual Coverage and Motion Tracking: Provides panoramic views and enables you to keep an eye on more vital areas. The Tapo C510W will also track and follow a subject smartly to keep it within the camera's field of view.
• Person Detection and Notification: Receive instant notification from the Tapo app when a person is detected.
• Local* and Cloud** Storage: Save recorded video on a microSD card (up to 512 GB)*, no subscription required. Cloud storage** is also supported for flexibility.

  *microSD card must be purchased separately. Actual storage capacity depends on the size of the microSD card used.

  **Subscribe for cloud storage at https://www.tapo.com/tapocare/

• IP65 Weatherproof: Helps Tapo C510W perform well even in harsh environments with rain and dust.
• Sound and Light Alarm: Triggers built-in/prerecorded sounds and light as an alarm to frighten away unwanted visitors.
• Customizable Sound and Light Alarm: Record your own audio as an alarm and adjust the brightness of dual spotlights for your customized use.
• Activity Zones: Set customized detection areas to only let what matters alert you.
• Two-Way Audio: Communicate remotely with a delivery person in real time.
• Multiple Installation Options: Use the mounting screws, template and loops* to install on any wall, ceiling or pole.

  *Loops (purchased separately) are needed for pole mounting.

• Physical Privacy Mode: Maintains your privacy with the lens physically blocked by the housing.

Appearance

The camera has the following components:

• 1. White Light LEDs: Provide illumination for color night vision.
• 2. IR LEDs: Provide infrared illumination for black and white night vision.
• 3. Lens: Captures the video feed.
• 4. System LED: Indicates the camera's status.
• 5. Microphone: Captures audio.
• 6. Reset Button: Use a pin to press and hold for 5 seconds to reset the camera.
• 7. microSD Card Slot: Insert a microSD card for local recording. (microSD card not included).
• 8. Speaker: Outputs audio for two-way communication or alarms.

A diagram shows the front and top views of the camera with numbered indicators pointing to these components. A separate diagram shows the microSD card slot and reset button area.

System LED Indication

Set Up Your Camera

Follow the steps below to get started with your new camera.

Step 1. Download Tapo App

Get the Tapo app from the App Store or Google Play, or by scanning the QR code provided in the original document. The app icons for App Store and Google Play are shown.

Step 2. Log In

Open the app, and log in with your TP-Link ID. If you don't have an account, create one first. A screenshot shows the Tapo app login screen with fields for TP-Link ID (Email) and Password, and options to Remember Me, Sign Up, and Forgot Password.

Step 3. Add Your Camera

Tap the '+' button > Add Device in the app and search for your model. Follow the app instructions to complete the setup. A screenshot shows the Tapo app's 'Add Device' screen, listing various device types like Indoor Cameras, Outdoor Cameras, Doorbells, etc.

Install a microSD Card

Follow the steps below to install the microSD card for local recording. You can go to Camera Settings > microSD Card in the Tapo app to check the card status or format your card.

1. Manually rotate the camera downwards. Loosen the screws on the panel and remove the cover.

2. Identify the direction of the microSD card and carefully insert the card into the slot. Push in the card until you hear a clicking sound.

A diagram illustrates this process, showing the camera's rear panel with screws and the microSD card slot. Another diagram shows the dimensions of the cover screws.

Mount Your Camera

When you finish adding your camera in the Tapo app, you can mount it on a wall or ceiling with the provided mounting template and screws. You can also mount it on the pole with mounting loops. Follow the steps below to mount your new camera.

Note: The camera is not waterproof when set on a table or shelf. Mount the camera via Option 1, 2 or 3 when installing outdoors.

Option 1: Wall Mount

1. Affix the Camera and Bracket: Route the camera power cord through the opening of the bracket. Use two bracket screws to affix the bracket and the camera. A diagram shows this step.
2. Drill Holes: Stick the mounting template to the desired mounting place. Drill four screw holes according to the template. A diagram shows a drill and indicates hole diameter of 6 mm (15/64 in.).
3. Mount the Camera: Insert four mounting anchors into the holes, then use the mounting screws to affix the camera and bracket over the anchors. A diagram shows this step with dimensions.
4. Power Up the Camera: Connect the camera to a power outlet using the provided power adapter. Install the waterproof seal for the power connectors. A diagram shows the power connector sequence: Male Power Connector → Waterproof Seal → Female Power Connector.

Option 2: Overhang Mount

1. Affix the Camera and Bracket: Route the camera power cord through the opening of the bracket. Use two bracket screws to affix the bracket and the camera. A diagram shows this step.
2. Drill Holes: Stick the mounting template to the desired mounting place. Drill four screw holes according to the template. A diagram shows a drill and indicates hole diameter of 6 mm (15/64 in.).
3. Mount the Camera: Insert four mounting anchors into the holes, then use the mounting screws to affix the camera and bracket over the anchors. A diagram shows this step with dimensions.
4. Power Up the Camera: Connect the camera to a power outlet using the provided power adapter. Install the waterproof seal for the power connectors. A diagram shows the power connector sequence: Male Power Connector → Waterproof Seal → Female Power Connector.

Option 3: Pole Mount

1. Affix the Camera and Bracket: Route the camera power cord through the opening of the bracket. Use two bracket screws to affix the bracket and the camera. A diagram shows this step.
2. Mount the Camera: Mount the camera on the pole using two pole-mounting loops* (loop width ≤ 12mm). A diagram shows the camera being attached to a pole with loops.

   *Pole-mounting loops are not included.

3. Power Up the Camera: Connect the camera to a power outlet using the provided power adapter. Install the waterproof seal for the power connectors. A diagram shows the power connector sequence: Male Power Connector → Waterproof Seal → Female Power Connector.

Install Waterproof Items

When the camera is installed outdoors, please install waterproof items to waterproof your camera. Make sure each part is securely attached and the water-proofing rings are flush to keep out water. Follow the steps below to install waterproof items.

Install Waterproof Seal for Power Connectors

Connect the camera to a power outlet using the provided power adapter. Install the waterproof seal for the power connectors when the camera is installed outdoors.

A diagram shows the power connector sequence: Male Power Connector → Waterproof Seal → Female Power Connector.

How to Reset Your Camera

Follow the steps below to reset your camera via the Reset button. You can also go to Camera Settings in the Tapo app and tap Remove Device at the bottom to factory reset your camera.

1. Manually rotate the camera downwards. Loosen the screws on the panel and remove the cover. A diagram shows the camera with screws and the reset/microSD area.

2. Press and hold the Reset button for at least 5 seconds until the LED blinks red. A diagram shows the camera with the reset button highlighted.

Authentication

FCC compliance information statement

Product Name: Outdoor Pan/Tilt Security Wi-Fi Camera

Model Number: TC41

Responsible Party: TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

"To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."

TP-Link USA Corporation has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2024-01-17

FCC compliance information statement (I.T.E. Power Supply)

Product Name: I.T.E. Power Supply

Model Number: T120100-2B1

Responsible Party: TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2024-01-17

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY (the maximum transmitted power)
2412MHz--2472MHz (20dBm)

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU Declaration of Conformity may be found at https://www.tapo.com/en/support/ce/.

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body.

UKCA Mark

UK Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at https://www.tapo.com/support/ukca/.

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

1. l'appareil ne doit pas produire de brouillage;
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements:

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice & BSMI Notice

Safety Consultation and Precautions:

• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• The adapter shall be easily accessible.
• Use only power supplies which are provided by the manufacturer and in the original packing of this product. If you have any questions, please contact TP-Link.
• The adapter should be used indoors where the ambient temperature is lower than or equal to 40°C.
• This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.
• Operating Temperature: -30 °C ~ 60 °C (-22°F ~ 140°F).

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Restricted Substances Statement

Equipment Name: Outdoor Pan/Tilt Security Wi-Fi Camera

Model: TC41

Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3: The “-” indicates that the restricted substance corresponds to the exemption.

Product certified according to the rules of the UkrSEPRO system for compliance with the requirements of regulatory documents and requirements stipulated by current legislative acts of Ukraine.

[EAC logo]

Explanation of the symbols on the product label

Symbols may vary from products