Monster DNA GO True Wireless Earbuds
User Manual and Specifications
About the Product
The Monster DNA GO are true wireless earbuds designed for immersive sound and convenience.
Packaging Details
Envelope
- Matte Black 350 gsm cardstock front and back
- Cardstock material
Stickers
- Matte Finish
- Instructions: Place Stickers Inside the Envelope - DO NOT print the white dieline
Package Includes
- (1) pair of wireless earbuds
- (1) charging case
- (1) charging cable
- (12) pairs of eartips
- (1) user manual
Product Specifications
| Specification | Details |
|---|---|
| Model No. | Monster DNA GO |
| Version | 5.2 Bluetooth Chipset |
| Support profiles | HSP/HFP/A2DP/AVRCP |
| Frequency response | 20hz-20kHz |
| Impedance | 32 Ω |
| Driver size | 12mm |
| Sensitivity | 110±3dB |
| Effective range | up to 10 meters |
| Earbud battery capacity | 2 x 50mAh |
| Playing time | 7-8 hours |
| Charging case battery capacity | 400mAh |
| Earbud charging time | Max. 1.5 hours |
| Charging case charge time | Approx. 1.5 hours |
| Charging port | Type-C™ |
| Input voltage | DC5.0V / 1A |
| Ingress protection | IPX5 (Earbuds only) |
| Wireless charging | Yes, Qi™ standard |
Earbud Operation
Power On
Take both earbuds out of the charging case and they will automatically power ON. Alternatively, if the earbuds are powered off, press and hold the Multi-Function Button (MFB) for 2 seconds.
Power Off
Place the earbuds back in the charging case, ensure that the case is powered. The earbuds will be automatically powered OFF. Or you can press and hold the MFB button on either earphone for 9 seconds.
Play/Pause
Press either MFB button once.
Volume Down
Press and hold the left MFB to decrease volume incrementally.
Volume Up
Press and hold the right MFB to increase volume incrementally.
Previous Track
Double press the Left MFB.
Next Track
Double press the Right MFB.
Answer Call
Press either MFB button once. (If answering a call while on another call, then the first call will be placed on hold).
Reject Call
Double press either MFB.
End Call
Press either MFB button.
Activating Phone Assistant
Triple press either MFB. (Does not work during a call)
Bluetooth Pairing
Go to "Bluetooth" Setting on your Bluetooth device (Phone, Tablet, etc.).
Turn the Bluetooth ON on your device.
Open the charging case, and take the earbuds out; they will turn on automatically.
If this is your first time using your earbuds, they will automatically enter Bluetooth Pairing mode.
On your device's Bluetooth menu, select the 'Monster DNA Go' earbuds from the list of available devices.
To pair your earbuds to a different Bluetooth device, disconnect from the DNA GO or turn off Bluetooth pairing on your original device. Remove the earbuds from the case and they will enter pairing mode automatically.
Troubleshoot Tip
If the earbuds do not connect to your device, place the earbuds back in their charging case, turn your device's Bluetooth OFF and then back ON again, then repeat the pairing process.
Factory Reset
Before resetting your earbuds, go to your paired device's Bluetooth list and remove (forget) the 'Monster DNA Go' earbuds.
- Place both earbuds in the charging case and make sure that they are both placed securely and are charging (the Earbud LED indicator should be ON).
- Press and hold the "Charging Case" button for 15s until the Charging Case LED indicator flashes red and white. The Earbud LED indicator will blink twice, then turn OFF.
- Once the Charging Case LED Indicator stops flashing, remove both earbuds from the case and hold them near each other. The Earbud LED Indicator on both earbuds should flash quickly or 5s-10s, then turn off, followed by intermittent flashing of the Left Earbud LED Indicator only. If this does not happen, repeat the Factory Reset steps.
- The Factory Reset is complete, and the earbuds will forget any previously paired devices. Follow the Bluetooth Pairing Instructions from the beginning to pair to a new device.
Charging
Charging the Case
Connect the USB-C™ charging cable into the socket on the charging case. Plug the cable into a standard USB-C™ 5V / 1A output. (LED indicator will flash red or green depending on the battery level.)
To check the charging case's battery level, single press the Charging Case Button.
- 0-10% - The first LED is blinking red.
- 10-33% - The first LED is breathing; the others are OFF.
- 33-66% - The first LED is ON, the second is breathing, the third is OFF.
- 66-99% - The first and second LEDs are ON, the third LED is breathing.
- 100%- All three LEDs are ON.
You can also charge your case via any Qi™ compatible wireless charger (not included); a full charge should take approximately 2.5 hours.
⚠️ Warning: To avoid damage to the charging case, please only use a 5V / 1A charger.
Charging the Earbuds
To charge your earbuds, place them in the charging case. The earbud LED indication will light up while they are charging and will turn off once they are fully charged.
It's recommended to fully charge your earbuds and charging case before first use.
⚠️ Warning: The earbuds can only be used with the provided charging case.
Important Safety and Compliance Information
This Bluetooth earpiece shall be charged by the supplied charging unit only.
⚠️ Caution: The batteries in this product are not replaceable. During use, storage or transportation the battery should not be subjected to extremely low temperatures, or low air pressure at high altitude. If the battery is exposed to extremely high temperatures it could result in an explosion or the leaking of flammable liquid or gas. Please take care when disposing of the unit; disposal in a fire, oven, mechanically crushing or cutting machine could cause an explosion.
⚠️ Warning: Do not dispose of the unit in fire or water. Never attempt to disassemble and reassemble. Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. Check with your local authority for recycling advice. Keep your device and all accessories out of the reach of children and animals. Small parts may cause choking or serious injury if swallowed. Avoid exposing your device to very cold or very hot temperatures (Below 0°C or above 45° C). Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device. Do not allow your device to get wet, liquids can cause serious damage. Do not handle your device with wet hands.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. iPhone, iPad and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the product.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
AN ICES-3 (B) / NMB-3 (B) This Class B digital apparatus complies with Canadian ICES-003.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Manufacturer Information
Responsible Party: LIFEWORKS TECHNOLOGY GROUP LLC
Address: 530 7th Ave, 21st Floor | New York, NY 10018
Tel: 212.221.1863 ext. 1534
E-mail: slee@golifeworks.com
Website: www.monsterforever.com
For French, Spanish and Portuguese instructions scan here: www.monsterforever.com
