V-TAC Innovative LED Lighting
Installation Instruction
Outdoor Wall Lamp
VT:7670
WEEE Number: 80133970
Product Overview
A modern, curved outdoor wall lamp featuring a brushed stainless steel body and a frosted white diffuser panel, designed for exterior illumination.
Technical Data
| SKU No. | 7513 |
|---|---|
| Input Voltage | AC:220-240V, 50Hz |
| Holder | E27 15W(MAX) |
| Protection Rating | IP44 |
| Unit size | 90x250x100mm |
Installation Diagram
The installation process is illustrated in several steps:
- Step 1: Shows the lamp body detached from its mounting bracket. An arrow indicates how the lamp body is to be attached to the bracket, and a screw is depicted.
- Step 2: Illustrates the mounting bracket being fixed to a wall using screws and plastic wall plugs. An arrow indicates the direction of rotation for tightening.
- Step 3: Depicts the lamp body being attached to the wall-mounted bracket with screws.
- Step 4: Shows the fully assembled lamp installed on the wall.
- Wiring Diagram (Step 6): This section details the electrical connections. It shows mains supply wires (Live, Neutral, Earth) connecting to the internal terminals of the lamp. The required cable size is specified as "Cable 2*1.0 mm²".
Introduction & Warranty
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
Warning
- Ensure that the power is switched off before installation.
- Install only by certified electrician.
- Keep this manual handy for future references.
Installation Instructions
Follow these steps for proper installation:
- Drill two holes on the wall and insert two plastic expansion bolts in it.
- Fix the plastic plate on the plastic expansion piece with self-tapping screws.
- Connect the supply leads with terminal.
- Open the lamp and install the bulb in the lamp.
- Fix the lamp body on the plate and tighten the screws.
- Switch on and test.
3 Years Warranty
