Introduction and Warranty
Thank you for choosing and purchasing a V-TAC product. V-TAC is committed to providing excellent service.
Please read these instructions carefully before starting the installation and keep this manual handy for future reference. For any queries, please contact your local dealer or vendor. The warranty is valid for 5 years from the date of purchase and covers manufacturing defects only. It does not apply to damage caused by incorrect installation, abnormal wear and tear, or improper handling.
Products are designed for 10-12 hours of daily operation. Continuous 24-hour operation may void the warranty.
Technical Specifications
| Model | Wattage | Lumens | Dimensions (LxWxH) |
|---|---|---|---|
| VT-39ST-S | 30W | 3000 LM | 416x99x138mm |
| VT-59ST-S | 50W | 5000 LM | 470x99x149mm |
| VT-79ST-S | 70W | 7500 LM | 470x99x149mm |
| VT-139ST-S | 100W | 11000 LM | 567x99x179mm |
| VT-169ST-S | 150W | 16500 LM | 628x99x203mm |
IP Rating: IP65
Features
- LED streetlight with an integrated light sensor for convenient and easy connection.
- Connects directly to the power supply like a standard streetlight.
- The light sensor operates automatically based on available daylight.
- The streetlight automatically turns off when natural light is above 100 LUX and turns on when natural light is below 75 LUX (buffer mode point: 75LUX ±25%).
- Manual turning the light on/off is not required.
- Note: If the sensor is obstructed, it may not operate as expected.
Warnings and Safety Precautions
- WARNING: Please ensure the power is switched OFF before starting the installation.
- The light source of this luminaire is not replaceable. The entire luminaire must be replaced when the light source reaches its end of life.
- If the external flexible cable or cord of this luminaire is damaged, it must be replaced exclusively by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
- Ensure proper grounding throughout the installation.
- Replace any cracked protective shield.
- Maintain a minimum distance of 1 meter from lighted objects.
- Read all instructions before installing the unit.
- The user must prepare all necessary accessories and spare parts (spare parts are not provided), including a junction box.
- The raised lighting must be connected to the earth ground.
- Installation must be performed by a qualified electrician only.
- Strictly follow these installation instructions and avoid contact with live power cables during installation.
Installation Instructions
Required Accessories: 4x M8 screws (Not included)
- Switch OFF the power supply before starting the installation.
- Connect the supply wires to the luminaire as shown in the wiring diagram.
- Wiring Diagram Description: Connect the Ground wire (Yellow & Green) to the appropriate terminal.
- Mounting the Luminaire:
- (a) For Pole Mounting: Pass the cable through the mounting adaptor. Loosen the adaptor screws, then tighten them onto the pole using an M8 Allen wrench. Use the wrench to loosen the screw on the luminaire to adjust the angle, then tighten securely.
- (b) For Wall Mounting: Pass the cable through the mounting adaptor. Fasten the luminaire to the wall using 4 M8 screws (NOT INCLUDED). Use the wrench to loosen the screw on the luminaire to adjust the angle, then tighten securely.
- Turn ON the power supply and test the unit.
Product Disposal
This marking [?] indicates that this product should not be disposed of with other household wastes. Caution, risk of electric shock. Please return electrical and electronic equipment at the end of its life to a designated collection point. Separate collection ensures that waste electrical and electronic equipment is treated properly. This helps to prevent potential negative effects on the environment and human health. For more information on collection and return points, please visit: ear-system.de.
