GOLFBUDDY GB LASER lite2 User Guide

Package Includes

• GB LASER lite2 Main Unit
• Carrying Case
• User Guide
• CR2 Battery
• Carabiner
• Microfiber Cloth (for lens cleaning)

Device Overview and Button Description

The device features the following components:

• Objective Lens
• Laser Transmit/Receive Part
• Product Label
• Mode Button
• Power/Measurement Button
• Diopter Adjustment
• 6x Monocular Eyepiece
• Battery Compartment

Viewfinder (LCD) Description

The LCD display shows the following information:

1. Scan indicator: Displays when scan mode is activated.
2. Pin indicator: Displays when pin finder mode is activated.
3. Distance: Slope-adjusted distance (Meters/Yards).
4. Unit of Measurement: Meters (M) or Yards (Y).
5. Targeting Crosshair: Used for aiming at the target.
6. Focus Square: Blinks when searching for the target, disappears when the target is captured.
7. Straight Line Distance: Laser-measured straight-line distance.
8. Height Difference: Indicates the height difference of the target (uphill: +, downhill: -).
9. Battery Indicator: Shows the remaining battery level.

Getting Started

Inserting the Battery & Setting Focus

1. Remove the battery cover: Lift and rotate the battery cap counterclockwise. Remove the protective film between the battery and cap. Insert a CR2 3V battery with the negative end facing inward.
2. Setting Focus: Use the viewfinder to aim and turn the diopter dial until the target and measurement data are clear.

How to Operate

1. Power On: Press the Power/Measurement Button.
2. Select Mode: Press the Mode Button.
3. Align Target: Align the crosshairs with the target.
4. Measure Distance: Press the Power/Measurement Button. The focus square will appear, and the distance will be measured.

Changing the Unit of Measurement

Hold down the MODE button for 3 seconds to switch between Meters and Yards.

Slope ON/OFF

Press and hold the MODE button for 5 seconds to turn the Slope feature on or off.

Slope Function

• Slope ON: Displays the slope-adjusted distance at the top of the screen. Straight-line distance and height difference (+/-) are shown at the bottom.
• Slope OFF: Displays the non-slope distance at the top of the screen. Other slope features will disappear.

Mode Setting

Standard Mode and Pin Finder Mode

Press the Mode Button to cycle between Standard and Scan modes. Mode changes are only possible when the targeting crosshair is displayed (not when the focus square is active).

• Press the Power/Measurement Button to display the distance with vibration feedback.
• Press and hold the Power/Measurement Button for 2-3 seconds to activate Pin Finder Mode. This mode identifies the closest target, even if there are objects behind it, ensuring accurate measurement to the pin.
• To use Pin Finder Mode effectively, aim at an object behind the pin (e.g., a tree), then move the targeting crosshair towards the pin.

Scan Mode

This mode is useful for measuring distances to multiple targets.

• Press the Power/Measurement Button once to initiate a 5-second continuous scan, displaying distances to various targets.
• In Scan Mode, the device measures distance upon the initial press of the Power/Measurement button.

Safety Warnings, Care, and Maintenance

Please read the following precautions carefully before using the device:

• Do NOT aim directly at the sun or into the eyepiece, as this may cause eyesight loss.
• Do NOT turn on the device while looking into the laser aperture or objective lens.
• The device may fail to measure distance through glass.
• Avoid prolonged exposure to direct sunlight, which may damage the unit.
• Keep the device away from children.
• If any liquid or substance gets on the device, clean it immediately with the provided cloth.
• The device has basic water resistance; avoid heavy rain or submersion in water.
• Do NOT disassemble the device, as this will void the warranty.
• Be aware that the carrying pouch may cause discoloration on light-colored clothing or accessories.
• Customer-induced defects are not eligible for free repair.

WARNING

GOLFBUDDY is not liable for damages caused by user misuse. Warranty may be void even if it is still in effect.

Troubleshooting:

• Unit does not turn on: Check battery polarity, battery level, and ensure the Power/Measurement button is functioning correctly.
• Distances cannot be obtained: Verify the mode setting (Standard/Scan), ensure the lens and laser receiver are not obstructed, adjust focus for a clear target view. Note that measurements may be affected by dark or moving targets, reflective surfaces, small objects, glass, backlighting, and weather conditions (fog, rain). Measurement is not possible for distances below 1 meter or above 880 yards.
• Viewfinder display is not clear: Adjust the diopter dial for a clear view of the distance and display. Check the battery level.

Specifications

Limited Warranty

Warranty Period

GOLFBUDDY products are covered by a limited warranty against defects in materials and workmanship for two (2) years from the date of original retail purchase. GOLFBUDDY may, at its discretion, replace or repair defective parts or issue credit.

Eligibility

This warranty applies only to the original authorized purchasers. Proof of purchase, including date, place, and amount paid, is required for warranty claims. The product must be returned in its original packaging with all accessories and manuals.

Warranty Claim Procedures

Contact GOLFBUDDY technical support at cs@golfbuddyglobal.com or visit help.golfbuddyglobal.com to obtain a Return Authorization Number. All returns must include the original purchase receipt and Return Authorization Number.

Warranty Exclusions

GOLFBUDDY disclaims all warranties, express or implied, except for those expressly stated. This includes warranties of merchantability or fitness for a particular purpose. GOLFBUDDY is not responsible for products not manufactured by GOLFBUDDY or for damage resulting from:

• Purchases through unauthorized channels.
• Damage during transit.
• Improper use, storage, or handling; use with non-GOLFBUDDY components; misuse; or operation outside recommended settings.
• Modification or alteration of the product by the purchaser or unauthorized service providers.
• Accidental or intentional damage.
• Loss of software, firmware, or data during repair.
• Use of the product in violation of any country's laws.

Limitation of Warranty

GOLFBUDDY shall not be liable for indirect, special, consequential, or liquidated damages. GOLFBUDDY's total liability is limited to the purchase price of the product.

How to Obtain Warranty Service or Other Information

• Korea: For service, contact: [Address: 442-17, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Ssangyong IT Twin Tower A, #507, PK Tech]. Phone: 1644-5721 (Weekdays 10 AM - 5 PM KST). Website: www.golfbuddy.com
• USA: Toll-free: 888-251-6058 / Fax: 888-441-5237. Email: support@golfbuddyglobal.com. Address: 10700 Norwalk Blvd. Santa Fe Springs, CA 90670, U.S.A. Website: www.golfbuddy.com
• For any inquiries, please contact the shop where you purchased the product.

Regulatory Compliance

KC Certification

Company Name: GolfzonDeca Inc.

Product Name: GOLFBUDDY GB LASER lite2

Model Name: GB LASER lite2

Manufacturer/Country of Origin: JINHUA LANHAI PHOTOELECTRICITY TECHNOLOGY CO.,LTD GRUPPO EMS, INC. / China, Philippines

Model Number: R-R-DET-GBLASERLITE2

RCM (Regulatory Compliance Mark)

GOLF BUDDY GB LASER lite 2

Safety of Laser Products

Complies with IEC/EN 60825-1:2014.

• Laser wavelength: 905nm
• Laser power: 220nJ
• CLASS 1 LASER PRODUCT
• Caution: Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous radiation exposure.

FCC

Company Name: GolfzonDeca Inc.

Product Name: Golf Rangefinder

Model: GB LASER lite2

FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Part 15.19: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Part 15.21: Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Modifications not expressly approved by the manufacturer could void your authority to operate the equipment under FCC rules.

CE

Product Name: Golf Rangefinder

Model: GB LASER lite2

Power: CR2: 3V === 85mA