ASSEMBLY INSTRUCTION

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all parts and compare with the HARDWARE LIST below.

Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury; therefore, for your production, please remove any exposed staples used in packing.

1. We recommend that you assemble this product with the assistance of another person; this will make assembly easier, and will help to eliminate damage to the product or injury to persons during assembly.
2. Please do not over tighten screws or bolts until the assembly is completed.
3. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your sofa.

PARTS LIST

HARDWARE LIST

Assembly Steps

Step 1:

Attach part 2 (Chaise) to part 1 (Love seat) using screws (A). Ensure alignment before tightening.

[Diagram showing parts 1 and 2 being joined, with arrows indicating screw insertion points and a reference to part A (screws). Part 8 (Back Cushion) and part 7 (Pillow) are shown nearby.]

Step 2:

Attach the legs (part 9 and 11) to the underside of the main sofa frame (part 1 and 2).

[Diagram showing the underside of the sofa components with legs being attached. Part 2 (Chaise) and part 3 (Loveseat back) are shown. Part 9 (Legs 1) and part 11 (Legs 2) are indicated for attachment. A screw (A) is shown for securing the legs.]

Step 3:

Connect the left facing arm (part 5) and the right facing arm (part 6) to the main sofa body (part 1). Use screws (A) for attachment.

[Diagram illustrating the connection of armrests to the sofa. Part 5 (Left Facing Arm) and part 6 (Right Facing Arm) are shown connecting to part 1 (Love seat). Screws (A) are indicated for securing these parts. An arrow shows the direction of connection. A note 'Not provided' is visible, likely referring to a tool.]

Step 4:

Slide the chaise back (part 4) into the designated slots on the chaise base (part 2).

[Diagram showing part 4 (Chaise back) being inserted into part 2 (Chaise). Arrows indicate the sliding motion. Part 5 (Left Facing Arm) is shown attached to part 1 (Love seat) in the background.]

Step 5:

Attach the loveseat back (part 3) to the loveseat base (part 1).

[Diagram showing part 3 (Loveseat back) being attached to part 1 (Love seat). Arrows indicate the connection points. Part 2 (Chaise) is shown connected to part 1.]

Step 6:

Connect the assembled loveseat section (part 1 with attached parts) to the chaise section (part 2 with attached parts).

[Diagram showing the two main sections of the sofa being joined. Part 1 (Love seat) and part 2 (Chaise) are brought together. Arrows indicate the connection mechanism.]

Step 7:

Place the back cushions (part 8) and pillows (part 7) onto the sofa frame.

[Diagram showing the placement of back cushions (part 8) and pillows (part 7) onto the assembled sofa structure. Part 3 (Loveseat back) and part 4 (Chaise back) are visible.

Step 8:

The sofa is now assembled. The chaise can be configured as a pull-out sleeper bed.

[Diagram showing the fully assembled sectional sofa. The chaise section is shown in its standard configuration. Arrows indicate the pull-out mechanism for the sleeper function.]

Configuration Options

Option 1:

Standard L-shaped sectional configuration.

[Diagram showing the sectional sofa in its primary L-shaped arrangement, with pillows and ottomans placed around it.]

Option 2:

Configuration as a pull-out sleeper sofa with storage chaise.

[Diagram illustrating the sectional sofa with the chaise extended into a bed. The storage compartment within the chaise is also indicated.]