Baby Einstein Sea Dreams Soother™
Brand: Baby Einstein
Model: 11058-6WS
Important Safety Information
To Prevent Serious Injury or Death:
- ALWAYS use the straps provided to attach the crib toy to the baby crib.
- NEVER attach any additional strings or straps to the crib toy.
HEAD ENTRAPMENT HAZARD:
- ALWAYS keep the bottom of the crib toy at least 7 inches (18 cm) above the surface of the mattress.
- If the toy is mounted to an adjustable crib side rail, ALWAYS keep the side rail in the raised (locked) position when the baby is in the crib.
IMPORTANT:
- Adult assembly is required to mount the crib toy and to change the batteries.
- Care should be taken when unpacking the crib toy.
- Examine product frequently for damaged, missing, or loose parts.
- Do not use product if damaged or broken.
Care and Cleaning
- Wipe the crib toy housing with a damp cloth. Do not immerse toy in water.
- Do not leave in direct sunlight. Store in a cool, dry place.
- CAUTION: The crib toy has no consumer serviceable parts inside. DO NOT disassemble the crib toy.
Battery Installation
The crib toy requires (4) size C/LR14 (1.5V) batteries for normal operation. The included batteries (C/R14) are for in-store demonstration; replace with new alkaline batteries for best performance.
The IR remote control requires (2) size AAA/LR03 batteries (not included). Use alkaline batteries for better performance.
CAUTION: Follow battery guidelines to avoid shortened battery life, leakage, or rupture.
- Always keep batteries away from children.
- Do not mix old and new batteries.
- Do not mix alkaline, standard, or rechargeable batteries.
- Only use batteries of the same or equivalent type as recommended.
- Install batteries with correct polarity matching compartment markings.
- Do not short-circuit batteries.
- Do not store batteries in extreme temperatures.
- Remove exhausted batteries promptly.
- Never attempt to recharge non-rechargeable batteries.
- Remove rechargeable batteries before charging.
- Charge rechargeable batteries only under adult supervision.
- Do not use rechargeable alkaline batteries in Ni-Cad or Ni-MH chargers.
- Use correct disposal methods for batteries.
- Remove batteries before storing the product for extended periods.
- Do not dispose of product or batteries in fire; they may explode or leak.
Diagram showing correct battery installation for the main unit (4 x C/LR14) and the remote control (2 x AAA/LR03), indicating polarity.
Operating Instructions
Power/Volume Switch: Slide from OFF to Low or High to select master volume for music or nature sounds.
Mode Selector Switch: Selects desired active functions for initial playback: music or nature sounds, and whether to include lights or motion in the sea scene. Playback functions diminish at 10-minute intervals:
- After 10 minutes: Sea motion stops, volume decreases.
- After 20 minutes: Sea lights turn OFF, volume decreases further.
- After 25 minutes: Music/nature sounds turn OFF. Unit enters Standby Mode with crib check light function available.
Play/Stop Buttons: Press on the main unit or IR remote to start/stop music/nature sound playback sequence (with lights/motion as selected). The playlist includes 9 melodies and natural water sounds.
IR Remote Sensor: Provides Play/stop function from any location with a direct view (360° within 12 ft range). Main unit senses input during playback or up to two hours after Standby Mode. Main unit must be ON and active to activate the sensor.
Low Battery Indicator: Detects weak batteries and suspends mobile/music operation. Indicator turns red when batteries are weak. Replace all batteries with new alkaline size C batteries for normal operation. Weak batteries cause erratic operation (distorted sound, dim/failed lights, slow/non-working parts).
Diagram illustrating the location of controls: Power/Volume Switch, Mode Selector Switch, Play/Stop Buttons, IR Sensor, Low Battery Indicator, and Crib Check Light Button on the main unit. Also shows the IR remote control and its buttons.
Diagram showing the Perfect Fit Crib Attachment™ and how it attaches to a crib rail.
Troubleshooting
| Problem | Probable Cause / Solution | See Page |
|---|---|---|
| Crib toy does not function | Remove Try-me pull tab and discard. Check or replace main batteries. Set Power/volume Switch to Low or High. |
5 9 15 |
| Remote control does not function | Press Play/start Button on crib toy to activate IR sensor (Power/volume Switch must not be OFF). Check or replace batteries in remote control. Move within range of crib toy (12 ft.). |
15 10 15 |
| Motion or lights does not function | Select mode that includes lights or motion. Use Play/stop Button to restart playback. Check or replace main batteries. |
15 15 9 |
Parts List
| No. | Qty. | Description |
|---|---|---|
| 1 | (1) | Crib toy, main unit |
| 2 | (1) | IR remote control |
| 3 | (1) | Perfect Fit Crib Attachment™ |
Diagram illustrating mounting instructions for the crib toy, showing stationary side attachment, detachable buckle, nylon strap, and vertical slider.
Product Disposal
Disposal Symbol: This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.
