Victrola Roadie Portable Bluetooth Speaker

Product Overview

The Victrola Roadie is a portable Bluetooth speaker designed for on-the-go listening. It features a classic design with a fabric grille, a sturdy carrying handle, and intuitive controls.

Key Features:

• Bluetooth Connectivity
• USB Playback
• Auxiliary Input
• Adjustable Volume, Bass, and Treble

Control Panel and Features

The speaker's control panel, located on the rear/top, includes the following:

• 1. Power Toggle Switch: For turning the unit ON/OFF.
• 2. Volume Knob & Next Function: Rotate to adjust volume. Press to skip to the next track in Bluetooth mode.
• 3. Bass Knob & Play/Pause Function: Rotate to adjust bass levels. Press to pause or resume playback in Bluetooth mode.
• 4. Treble Knob & Previous Function: Rotate to adjust treble levels. Press to go to the previous track in Bluetooth mode.
• 5. USB Input: Port for connecting a USB flash drive for music playback.
• 6. 3.5mm AUX Input Jack: Port for connecting external audio devices via an audio cable.
• 7. LED Indicator: Displays connection status (Blue for Bluetooth, Red for Aux-In).
• 8. LED Charging Indicator: Shows charging status (Red for charging, Green for charging complete).
• 9. DC Input for Adaptor: Port for connecting the power adapter (5V-1A).

Specifications

Included Accessories: Instruction Manual, AC/DC Adaptor, Roadie Bluetooth Speaker (1pc), Manual (1pc), Power Adapter (5V-1A) (1pc).

Charging Operation

The speaker is powered by a built-in rechargeable Li-ion battery. Use the included power adapter (DC 5V/1A) for charging.

Warning: The built-in rechargeable battery is not replaceable. Do not attempt to remove or replace it. Do not dispose of the device in regular trash or fire. Dispose of the device at designated battery recycling sites after fully discharging the battery, in accordance with local laws and regulations.

Bluetooth Operation

1. Turn the power switch to the ON position. The device will power on in Bluetooth mode. The Bluetooth LED will illuminate and flash blue.
2. Enable Bluetooth on your device (e.g., smartphone, tablet).
3. Locate "VICTROLA ROADIE" on your device's Bluetooth list. Lower the speaker volume before pairing to avoid sudden loud audio.
4. Select "VICTROLA ROADIE" to pair. If prompted, enter the pass code "0000".
5. Upon successful pairing, an audible sound will confirm the connection.
6. Adjust volume, bass, and treble using the respective knobs.
7. Use the Volume Knob [next] to play the next song.
8. Use the Bass Knob [play/pause] to pause or resume playback.
9. Use the Treble Knob [previous] to play the previous song.

Notes:

• Refer to your Bluetooth device's manual for specific operation details.
• Your device must support A2DP for music playback through the speaker.
• The speaker will automatically reconnect to the last paired device when powered on.
• To connect to a new device, disconnect from the current device first to re-enter pairing mode.

USB Operation

1. Turn the power switch ON.
2. Insert a USB flash drive (not included). The speaker will automatically switch to USB mode.
3. Operations for knobs and functions are the same as Bluetooth mode.

Note: The device supports USB flash drives up to 64GB, and some 128GB drives with mixed files. Large, non-music files may affect performance.

Aux-In Operation

Connect external audio sources like iPods or MP3 players using an audio cable (not included).

1. Plug one end of an audio cable into the Aux-In JACK. The speaker will automatically switch to AUX mode, and the LED indicator will illuminate RED.
2. Plug the other end of the cable into the headphone jack of your external audio player.
3. Play music from the connected external device.
4. Adjust volume levels on both the speaker and the external device for optimal audio.
5. Adjust Volume, Bass, and Treble using the respective knobs on the speaker.

Notes:

• Using the speaker's Previous/Next or Play/Pause functions may not control the external device if it is in Aux-In mode.
• Ensure volume is adjusted on both the external device and the speaker for desired audio levels.

Care and Maintenance

• Avoid exposing the unit to excessive force, shock, dust, or extreme temperatures.
• Do not attempt to tamper with internal components.
• Clean the unit with a dry cloth only. Do not use solvents or detergents.
• Keep the unit away from direct sunlight, hot, humid, or dusty environments.
• Keep the unit away from heating appliances and sources of electrical noise (e.g., fluorescent lamps, motors).

Cleaning the Unit

• Disconnect the unit from the AC power source before cleaning to prevent fire or shock hazards.
• The unit's finish can be cleaned with a dust cloth, similar to furniture. Exercise caution when cleaning plastic parts.
• For dust, use a soft, dry dust cloth. Do not use wax or polish sprays.
• For smudges or fingerprints on the front panel, use a soft cloth slightly dampened with a mild soap and water solution. Avoid abrasive cloths or polishes, as they can damage the finish.

Caution: Never allow water or liquids to enter the unit during cleaning.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

California Proposition 65 Warning

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Industry Canada (IC) Warning

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Warranty Information

Victrola is a registered trademark of Innovative Technology Electronics LLC.

Innovative Technology Electronics LLC. Limited Warranty: 90 Days Labor, One Year Parts

Innovative Technology Electronics LLC. (IT) warrants the product to be free from "Defects" in materials under normal use for a period of "One Year" from the date of the original purchase. The Warranty is "Not" transferable. IT agrees, within the initial "90 Day" period, to repair or replace the product if it is determined to be defective at "No Charge". It is further agreed that IT will cover the cost to repair or replace damaged "Parts" only for a total period of "One Year" from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent.

To Obtain Service:

The purchaser MUST present an original sales receipt or proof of purchase. To request a Return Material Authorization (RMA) number, please visit www.victrola.com. Returns without an RMA number on the package will be refused and returned to the sender.

Upon receipt and inspection, IT may issue a replacement with the same or an equivalent item. To initiate a return, provide your full name, return address, phone number, item purchased, proof of purchase, and reason for return to obtain an RMA number.

All returns must be in original packaging or a reasonable substitute to prevent damage. Include your full name, shipping address, and telephone number inside the package. Returns cannot be shipped to a PO Box or APO address.

Handling and Return Shipping Fees: Include a check or money order payable to Innovative Technology Electronics LLC. for the following amounts:

• USD $5.00 for items priced $10.00 to $39.99 (per unit).
• USD $10.00 for items priced $40.00 to $99.99 (per unit).
• USD $16.00 for items priced $100.00 and up (per unit).
• Shipping fees are non-refundable.

IT is not responsible for delays or unprocessed claims due to incomplete information. Send all inquiries or RMA requests via the website: www.victrola.com/pages/technical-support.

Contact Information:

Victrola is a registered trademark of Innovative Technology Electronics LLC.
Innovative Technology Electronics LLC.
1 Channel Drive
Port Washington, NY 11050
Toll free: 1-877-483-2497
Website for support: www.victrola.com/pages/technical-support

There are no express warranties except as listed above. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER. IT SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

Made In China.