Poly Studio E70 Camera Display Mount Quick Start

Tools Required

• 5mm L-Key Hex
• 4mm L-Key Hex
• Tie Wrap (6)

Contents

The package includes the main display mount bracket for the Poly Studio E70 camera.

Hardware Included

• M6 x 50 mm Screw (2)
• M8 x 15 mm Screw (2)
• M8 x 25 mm Screw (2)
• M8 x 50 mm Screw (2)
• M4 x 16 mm Screw (2)
• M8 Washer, 5mm thick (2)
• M8 Stud (2)
• M8 Lock Washer or M6 Lock Washer (2)
• M8 x 50mm Screw or M8 x 25mm Screw or M8 x 15mm Screw or M6 x 50mm Screw or M6 x 25mm Screw or M6 x 12mm Screw (2)
• M4 Flat Washer (2)
• M4 Lock Washer (2)
• M4 x 10 mm Screw (2)
• M8 Flat Washer, 1.6 mm thick (4)
• M8 Nut (4)
• M6 Lock Washer (2)
• M6 x 12 mm Screw (2)
• M6 x 25 mm Screw (2)

Assembly Steps

1. Step 1

   Attach the Poly Studio E70 camera to the main display mount bracket using two M4 x 10 mm screws, two M4 flat washers, and two M4 lock washers.

2. Step 2

   Secure the display mount assembly to the display using two M8 x 50 mm screws, two M8 washers (5mm thick), and two M8 nuts.

3. Step 3 (Optional)

   For optional wall or pole mounting, use the provided template to drill holes and secure the mount using user-supplied hardware.

4. Step 4 (Optional)

   If your display has M8 studs, attach the mount using two M8 nuts and four M8 flat washers (1.6mm thick). For additional security or specific mounting points, use two M4 x 10 mm screws with two M4 flat washers and two M4 lock washers.

5. Step 5

   Attach the display mount bracket to the display using two M6 x 12 mm screws, two M8 washers (5mm thick), and two M8 lock washers.

6. Step 6

   Attach the display mount bracket to the display using two M6 x 25 mm screws, two M8 washers (5mm thick), and two M8 lock washers.

7. Step 7

   Place the Poly Studio E70 camera into the display mount cradle and secure it.

8. Step 8

   Adjust the camera's viewing angle by rotating the mount's swivel arm.