Poly Studio X52 with Display Clamp

QUICK START

POLY STUDIO X52 WITH DISPLAY CLAMP

[QR Code] Scan for setup assistance: poly.com/support/studio-x52/dc

CONTENTS

• [Tool]
• (2) M4 x 8 mm Flat Head Screw
• HDMI 2 m (6.6 ft)*
• Ethernet Network Cable 4.6 m (15 ft)*
• Display Clamp
• Poly Studio X52 and Power Supply*
• RJ11 - Expansion Microphone
• (2) USB-A Accessories
• RJ45 Ethernet
• AC Power

Installation Steps

1. Step 1: Attach Display Clamp

   Align the display clamp with the Poly Studio X52 device. The clamp has a specific groove designed to fit the device's edge. [Diagram shows the clamp being attached to the device].

2. Step 2: Secure Clamp

   Insert the two M4 x 8 mm flat head screws to firmly attach the clamp to the device. [Diagram shows screws being inserted at an angle into the clamp and device].

3. Step 3: Mount on Display

   Place the Poly Studio X52, now with the display clamp attached, onto the top edge of your display. [Diagram shows the device and clamp assembly being placed on a monitor screen].

4. Step 4: Adjust Angle

   Position the Poly Studio X52 on the display to achieve the desired viewing angle. [Diagram shows the device being tilted on the display edge].

5. Step 5: Connect Cables

   Connect the necessary cables to the ports on the back of the Poly Studio X52. The ports are labeled as follows:

   • HDMI Out - Display 2
   • HDMI Out - Display 1
   • HDMI In - Device Mode/Content Sharing
   • USB-C - Device Mode
   • RJ11 - Expansion Microphone
   • (2) USB-A Accessories
   • RJ45 Ethernet
   • AC Power

   [Diagram shows the rear panel with all ports clearly labeled and cable connections indicated].

CAUTION

Handle the device with care. [Visual representation of caution is replaced with text].

Support and Information

For additional support and product information, visit: poly.com/support/studio-x52

For management software, visit: poly.com/lens

♻️ Recyclable where facilities exist

Radio Frequency Information:
Frequency and transmit power for radio-enabled products only:

© 2023 Poly. All trademarks are the property of their respective owners.
1725-87989-0010 02.23 Studio X52 Model P033