Poly Studio R30 VESA Mount
Quick Start Guide
Contents Overview
This guide provides essential instructions for installing the Poly Studio R30 VESA Mount. It details the necessary hardware and outlines step-by-step procedures for various mounting configurations, ensuring a secure and proper setup for your Poly Studio R30 device.
Hardware and Tools
- M4 Lock Washer (x2)
- M6 Lock Washer (x2)
- M8 Lock Washer (x2)
- M4 Flat Washer (x2)
- M8 Flat Washer, 1.6mm thick (x6)
- M8 Washer, 5mm thick (x10)
- M8 Nut (x4)
- M4 x 10mm Screw (x2)
- M6 x 12mm Screw (x2)
- M6 x 25mm Screw (x2)
- M8 x 15mm Screw (x2)
- M6 x 50mm Screw (x2)
- M8 x 25mm Screw (x2)
- M8 x 50mm Screw (x2)
- 5mm L-Key Hex [Allen Key]
- 4mm L-Key Hex [Allen Key]
- Tie Wrap (x6)
Top Mount Configurations
Top Mount 1: Attach Bracket to Device
Begin by attaching the primary mounting bracket to the Poly Studio R30 device. This step requires the following hardware:
- (2) M4 x 10mm Screws
- (2) M4 Flat Washers
- (2) M4 Lock Washers
Use the 4mm L-Key Hex [Allen Key] to securely tighten these components.
Top Mount 2: Mount Device to Display Arm
Connect the Poly Studio R30 device, now fitted with its bracket, to a compatible display mounting arm. Ensure the arm is designed to accommodate device thicknesses ranging from 3mm (0.12 inches) up to 24mm (0.94 inches).
Top Mount 3: Mount to VESA Display
Secure the mounting bracket assembly to the VESA mounting interface of your display. This process involves selecting the appropriate screws and washers based on your specific display's VESA pattern (e.g., 75x75mm, 100x100mm, 200x100mm, 200x200mm) and its thickness. The necessary hardware typically includes:
- (4) M8 Flat Washers, 1.6mm thick
- (4) M8 Nuts
- Appropriate M8 Screws (e.g., M8 x 15mm, M8 x 25mm, M8 x 50mm)
- (2) M8 Studs
- (2) M8 Lock Washers (or M6 Lock Washers if using M6 screws)
It is crucial to use screws that are long enough to engage the VESA threads securely without protruding excessively or causing damage to the display. Tighten all fasteners using the 5mm L-Key Hex [Allen Key].
Top Mount 4: Secure Device to Mount
Complete the installation by firmly securing the Poly Studio R30 device onto the already mounted bracket. This final step often involves engaging a locking screw or a similar retention mechanism.
Bottom Mount Configurations
Bottom Mount 1: Attach Bracket to Device
Begin by attaching the primary mounting bracket to the Poly Studio R30 device. This step requires the following hardware:
- (2) M4 x 10mm Screws
- (2) M4 Flat Washers
- (2) M4 Lock Washers
Use the 4mm L-Key Hex [Allen Key] to securely tighten these components.
Bottom Mount 2: Mount Device to Display Arm
Connect the Poly Studio R30 device, now fitted with its bracket, to a compatible display mounting arm. Ensure the arm is designed to accommodate device thicknesses ranging from 3mm (0.12 inches) up to 24mm (0.94 inches).
Bottom Mount 3: Mount to VESA Display
Secure the mounting bracket assembly to the VESA mounting interface of your display. This process involves selecting the appropriate screws and washers based on your specific display's VESA pattern (e.g., 75x75mm, 100x100mm, 200x100mm, 200x200mm) and its thickness. The necessary hardware typically includes:
- (4) M8 Flat Washers, 1.6mm thick
- (4) M8 Nuts
- Appropriate M8 Screws (e.g., M8 x 15mm, M8 x 25mm, M8 x 50mm)
- (2) M8 Studs
- (2) M8 Lock Washers (or M6 Lock Washers if using M6 screws)
It is crucial to use screws that are long enough to engage the VESA threads securely without protruding excessively or causing damage to the display. Tighten all fasteners using the 5mm L-Key Hex [Allen Key].
Bottom Mount 4: Secure Device to Mount
Complete the installation by firmly securing the Poly Studio R30 device onto the already mounted bracket. This final step often involves engaging a locking screw or a similar retention mechanism.
Bottom Mount 5, 6, 7, 8: Alternative Mounting Options
These sections illustrate various alternative methods for attaching the Poly Studio R30 device to different mounting surfaces or arms. The general procedure involves utilizing M8 studs in conjunction with a selection of M8 or M6 screws, M8 flat washers (5mm thick), and lock washers. The diagrams depict the process of sliding or securing the device onto a mount, with specific hardware configurations detailed for each variation.
Key hardware components for these alternative mounts include:
- (0-10) M8 Flat Washers, 5mm thick
- (2) M8 Flat Washers, 1.6mm thick
- (2) M8 Lock Washers or (2) M6 Lock Washers
- (2) M8 Studs
- A range of screw options: M8 x 50mm, M8 x 25mm, M8 x 15mm, M6 x 50mm, M6 x 25mm, M6 x 12mm
These configurations are intended for optional assembly when using user-supplied TV mounts or similar mounting solutions.
Poly Studio R30 | Poly, formerly Plantronics & Polycom
