HAMPTON BAY

THANK YOU

We appreciate the trust and confidence placed in Hampton Bay through the purchase of this replacement canopy. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!

Safety Information

Safety WARNINGs

• WARNING: Keep all flame and heat sources away from this gazebo fabric.
• WARNING: The application of any foreign substance to the gazebo fabric may render the flame resistant properties ineffective.
• WARNING: This gazebo is made with fabric that meets CPAI - 84 specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous contact with any flame source.

Warranty

2 YEAR FABRIC WARRANTY

WHAT IS COVERED

Hampton Bay warrants the fabric to be free of manufacturing defects to the original purchaser for two years.

WHAT IS NOT COVERED

It remains the customer's responsibility for freight and packaging charges to and from our service center. This warranty does not cover commercial use, hardware, acts of nature, fire, freezing, and abusive use. In addition, purchased parts are not covered under this warranty. Hampton Bay reserves the right to make substitutions with similar merchandise if the model in question is no longer in production.

Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HOMEDEPOT.ca.

Pre-Assembly

PLANNING ASSEMBLY

Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.

NOTE: More than one person may be required to complete the assembly of this product.

PACKAGE CONTENTS

A diagram shows the pergola structure with parts labeled. The main structure consists of four vertical posts supporting a curved roof frame. The fabric shade (J) is shown draped over the roof structure, and a protective cover (I) is also indicated.

Assembly

1 Inserting the short shade rods into the fabric shade

• Insert the short shade rods (F) into the top slots of the fabric shade (J).

A close-up diagram illustrates inserting a short shade rod (F) into the top slot of the fabric shade (J).

2 Attaching the short shade rods

• Attach the four ends of the short shade rods (F) to the front connector bars (A & B) using M6x35 combination bolts (CC).
• Pull out the elastic ribbons on the two fabric slot ends, as shown in the diagrams.

Diagrams show the attachment of short shade rods (F) to connector bars (A & B) using bolts (CC). One diagram shows a close-up of the connection point, and another shows the overall pergola with these rods attached to the fabric shade (J).

3 Connecting the long shade rods

• Insert the long shade rods (G) into the slots at the ends of the fabric shades (J), through the plastic wheels (E1) and rolling wheel (E2), into the remaining slots of the fabric shades (J).
• Pull the elastic ribbons to the plastic wheel on the side top bar (D), as shown in the diagrams.
• Attach the long shade rods (G) to the plastic wheels (L1) on the other side top bar (D), and secure with M6x18 countersunk bolts (BB).

NOTE: Fully tighten all the bolts using the hex wrench (FF).

Diagrams illustrate the process of connecting long shade rods (G) to the fabric shades (J) and securing them to the top bars (D) using bolts (BB). Close-up views show the insertion of rods through wheels and attachment points.

4 Installing the protective cover

• Attach the protective cover (I) to the side top bars (D) and the center lengthways bar (E) using M6x15 combination bolts (AA).

NOTE: Fully tighten all the bolts using the hex wrench (FF).

Diagrams show the attachment of the protective cover (I) to the top bars (D) and center bar (E) using bolts (AA). Close-up views highlight the connection points.

Care and Cleaning

• For best results, clean the canopy with a damp cloth, and dry the frames thoroughly. This will help prevent mildew by removing dirt particles that may accumulate.
• Do not clean with abrasive materials, bleach, or solvents.
• Store the canopy in a dry, sheltered place when not in use.
• Keep the canopy away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.