Hampton Bay 3 Person Swing with Canopy
Use and Care Guide
Model #: GSS00132D
Item #: 1001 868 823
Introduction
Thank you for purchasing the Hampton Bay 3 Person Swing with Canopy. We strive to create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Contact Customer Service: 1-855-HD-HAMPTON | Website: HAMPTONBAY.COM
Important Safety Instructions
SAVE THESE INSTRUCTIONS
⚠️ WARNING: This swing was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is intended for normal outdoor use. However, the manufacturer recommends storing and / or covering this product when any formidable / severe weather is approaching.
⚠️ WARNING: Do not locate this product near open flames. Do not use this product as a support. Do not shake, lean or climb on the product. Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is NOT intended for commercial use and will void the warranty.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
- Close supervision is necessary when this product is used by or near children, or disabled persons, if applicable.
- Use this product only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
- Please keep children out of the assembly area before assembly.
⚠️ WARNING: Weight limit for the swing is 250 lbs (113.39 kg) for each seat.
⚠️ WARNING: This swing unit is heavy, and may require two adults for safe assembly.
⚠️ WARNING: Do not shake from side to side when using the product.
⚠️ CAUTION: Do not locate the product near any heat source.
⚠️ CAUTION: Do not place heavy objects on the swing.
Warranty
2 YEAR FRAME AND 2 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
Hampton Bay warrants the frames to be free of manufacturing defects to the original purchaser for two years, and a two year limited warranty for the fabric.
WHAT IS NOT COVERED
It remains the customer's responsibility for freight and packaging charges to and from our service center. This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty. Hampton Bay reserves the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to assemble this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Diagram Description: Visual representation of various bolts, nuts, washers, hooks, hex wrench, and a standard wrench.
| Part | Description | Quantity |
|---|---|---|
| AA | M8x100 combination bolt, washer and nut | 4+1 |
| BB | M8x90 combination bolt, washer and nut | 4+1 |
| CC | M8x50 combination bolt, washer and nut | 2+1 |
| DD | M8x45 combination bolt, washer and nut | 4+1 |
| EE | M6x85 combination bolt, washer and nut | 4+1 |
| FF | M6x60 combination bolt, washer and nut | 4+1 |
| GG | M6x40 combination bolt | 8+1 |
| HH | M6x30 bolt | 2+1 |
| II | Hook | 2 |
| JJ | Support bar | 2 |
| KK | Screw knob | 2 |
| LL | Hex wrench | 1 |
| MM | Wrench | 1 |
PACKAGE CONTENTS
Diagram Description: An exploded view of the swing showing all major components labeled with letters A through L.
| Part | Description | Quantity |
|---|---|---|
| A | Top bar | 1 |
| B | Leg | 4 |
| C | Side bar | 2 |
| D | Seat | 1 |
| E | Arm | 2 |
| F | Long swing pipe | 2 |
| G | Short swing pipe | 2 |
| H | Curved bar | 2 |
| I | Support bar | 1 |
| J | Canopy | 1 |
| K | Back cushion | 3 |
| L | Seat cushion | 1 |
Assembly Instructions
NOTE: Two adults may be required for safe assembly.
Step 1: Assembling the swing frame
Diagram Description: Shows the main frame assembly. Legs (B) are attached to the top bar (A). Support bars (JJ) connect legs (B) to the top bar (A). Side bars (C) connect to the legs (B).
- Attach two sets of the legs (B) to the top bar (A) using M8x100 combination bolts, washers and nuts (AA).
- Attach the support bars (JJ) to the legs (B) and the top bar (A) using M8x50 combination bolts, washers and nuts (CC) and M8x45 combination bolts, washers and nuts (DD).
- Attach the two side bars (C) to the legs (B) using M6x40 combination bolts (GG).
- Once all of the bolts are in place, fully tighten the bolts.
Step 2: Attaching the arms to the seat
Diagram Description: Shows the seat (D) with arms (E) being attached. Bolts (BB) and (EE) are used.
- Attach the arms (E) to the seat (D) using M8x90 combination bolts, washers and nuts (BB) and M6x85 combination bolts, washers and nuts (EE).
- Once all of the bolts are in place, fully tighten the bolts.
Step 3: Attaching the long swing pipes and the short swing pipes to the arms
Diagram Description: Shows the long swing pipes (F) and short swing pipes (G) being attached to the arms (E) using bolts (FF). Hooks (II) connect the top ends of the pipes (F and G).
- Attach the long swing pipes (F) and the short swing pipes (G) to the arms (E) using M6x60 combination bolts, washers and nuts (FF).
- Connect the top of the two swing pipes (F and G) using the hooks (II).
- Once all of the bolts are in place, fully tighten the bolts.
Step 4: Attaching the seat to the swing frame
Diagram Description: Shows the assembled seat unit being hung onto the main swing frame using hooks (II).
- Attach the assembled seat to the swing frame using the hooks (II).
Step 5: Assembling the top frame
Diagram Description: Shows the assembly of the canopy frame. Support bar (I) connects curved bars (H) using bolts (HH). Canopy (J) is then placed and secured with Velcro to the curved bars (H).
- Attach the support bar (I) to the curved bars (H) using M6x30 bolts (HH).
- Fully tighten all of the bolts on the top frame using the hex wrench (LL) before placing the canopy.
- Place the canopy (J) on the assembled top frame and tie the canopy (J) to the curved bars (H) by affixing the Velcro.
NOTE: Pay attention to the direction of the curved bars (H).
Step 6: Attaching the top frame to the top bar
Diagram Description: Shows the assembled top frame being attached to the main top bar (A) using screw knobs (KK). Back cushions (K) and seat cushion (L) are placed.
- Attach the top frame to the top bar (A) using the screw knobs (KK) on both sides.
- Adjust the angle of the top frame and fully tighten the screw knobs (KK) in the clockwise direction.
- Place the back cushions (K) and the seat cushion (L) on the seat.
Step 7: Tightening the bolts
Diagram Description: Shows the fully assembled swing.
- Ensure the swing is tightly assembled and stable before use.
Care and Cleaning
- For best results, clean the swing with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate.
- Do not clean with abrasive materials, bleach, or solvents.
- Store the swing in a dry, sheltered place when not in use.
- Keep the swing away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
