Laurastar GO Quick User Guide

Safety Instructions

Please read all safety instructions before using the appliance.

(Note: Detailed safety instructions are provided in multiple languages in the original document, but the primary focus here is on the operational guide.)

1. Content of the Box

Your Laurastar GO package includes:

• The Laurastar GO ironing system (ironing board and steam generator unit)
• A bottle labeled "PURIFY" (for descaling)
• A bottle labeled "BEAUTIFY" (for enhancing steam)
• A hanger for steaming
• A tray for collecting water
• (Optional accessories may vary)

Diagram Description: The box contents are illustrated, showing the main ironing system, cleaning/enhancement bottles, a hanger, and a draining tray.

2. Installation

Follow these steps to set up your Laurastar GO:

1. Unfolding the Board: Start with the ironing board folded.
2. Opening the Board: Gently open the ironing board until it is stable.
3. Extending Legs: Ensure the legs are fully extended and locked into place for a secure base.
4. Attaching the Steam Generator: Slide the steam generator unit onto its designated holder on the ironing board.
5. Securing the Hose: Attach the steam hose to the board using the provided clip or hook.
6. Water Tank Preparation: Ensure the water tank is ready for filling as per instructions.

Diagram Description: A series of illustrations show the progressive unfolding of the ironing board, the attachment of the steam generator unit, and the securing of the steam hose.

3. Switching On

1. Press the power button to turn on the unit.
2. Set the temperature dial and allow the system to heat up (approximately 8-10 minutes ⏱️).
3. The iron is ready for use when the indicator light shows.
4. The unit features an automatic shut-off function after 10 minutes ⏱️ of inactivity.

Diagram Description: Illustrations show pressing the power button, setting the temperature and timer, using the iron with steam (indicated by steam clouds and "HOT" ? symbol), and the auto-stop feature.

4. Ironing

1. Ironing Technique: Move the iron smoothly over the fabric. The system may indicate a 2-minute ⏱️ pre-heating or steaming cycle.
2. Fabric Settings: Adjust settings based on fabric type for optimal results.
3. Steam Application: Use the steam button for effective wrinkle removal. A "Click" sound may indicate steam readiness.
4. Hot Surface Warning: Be aware that the iron and board surfaces can be hot ?. ⚠️
5. Steaming Garments: The iron can be used for steaming garments directly on the board or on hangers.

Diagram Description: Visuals demonstrate ironing techniques, adjusting steam, fabric settings, warnings about hot surfaces, and steaming clothes on the board or a hanger.

5. Refilling the Water Tank

1. The unit may signal when the water level is low (e.g., "BIP" ? sound).
2. Ensure the unit is turned off ? and cool before refilling.
3. Turn the unit off ? and unplug it ? from the power outlet ⚠️.
4. Open the water tank and fill it with water, using the "PURIFY" or "BEAUTIFY" solutions as recommended.
5. Ensure the tank is properly closed after refilling.

Diagram Description: Steps show the unit signaling low water, turning off the unit, unplugging it, and refilling the water tank with liquid.

6. Draining

1. It is recommended to drain the unit monthly ?.
2. Turn off ? and unplug ? the unit.
3. Allow the unit to cool down (indicated by a timer up to 120 minutes ⏱️).
4. Position the unit over a suitable container or sink.
5. Drain any remaining water from the unit.
6. Repeat the draining process as needed (e.g., 2-3 times ?) to ensure complete emptying.

Diagram Description: Illustrations guide the user through draining the unit, including timing, positioning, and repeating the process.

7. Descaling

Descaling is recommended annually ? to maintain performance.

1. Turn off ? and unplug ? the unit.
2. Allow the unit to cool.
3. Prepare the descaling solution (e.g., "PURIFY") according to instructions.
4. Fill the water tank with the descaling solution and water mixture.
5. Allow the solution to circulate or sit for a specified period (e.g., 120 minutes ⏱️).
6. Drain the solution and rinse the unit thoroughly with clean water.
7. Repeat the rinsing process multiple times (e.g., 2x ?) to ensure all solution is removed.

Diagram Description: Steps show the annual descaling process, involving adding a descaling solution, waiting periods, draining, and rinsing the system.

8. Maintenance

1. Turn off ? and unplug ? the unit.
2. Allow the unit to cool.
3. Place a protective cloth on a flat surface.
4. Place the iron on the protective cloth.
5. Wipe the iron and board as needed.
6. Ensure the unit is unplugged ? before any maintenance.

Diagram Description: Visuals depict turning off the unit, cooling, placing a protective cloth, and wiping down the iron.

9. Storage

1. Turn off ? and unplug ? the unit.
2. Allow the unit to cool.
3. Fold the ironing board carefully.
4. Store the unit in a safe, dry place.

Diagram Description: Steps show folding the ironing board and storing the unit in an upright, compact position.

10. Accessories

Enhance your experience with available Laurastar accessories, such as protective cloths, water filters, and descaling solutions.

Diagram Description: Images showcase various optional accessories designed to complement the Laurastar GO system.

11. Download the App

Download the Laurastar app to access user guides, installation help, and other features.

Scan the QR code [QR code] or search for "Laurastar" on the [App Store icon] or [Google Play icon].

Diagram Description: A QR code is displayed, along with icons for the App Store and Google Play. Smartphone screen mockups show the app's interface and features.