VALBERG 10000835 Vacuum Cleaner
Model: 10000835 BL3
Brand: VALBERG
Distributed by: ELECTRO DEPOT
Product Overview
Components
- A Floor brush with selector
- B Extension hose
- C Storage compartment clip
- D Handle equipped with a suction power valve
- E Dust cup
- F Cable rewind button
- G Speed control knob
- H On/Off switch
- I Hose connection
- J Power cable with plug
Accessories (may vary according to the model)
- Furniture brush
- Upholstery crevice tool
- HEPA filter
- Motor protection filter
- Exhaust air filter
Product Description
Unpack the product. Remove all labels. Check that the unit is complete and in good condition. If the unit is damaged or faulty, do not use it and take it to your retailer or after-sales service centre.
Keep all packaging out of the reach of children. There is a risk of accidents if children play with packaging materials.
Intended Use
This unit is a universal vacuum cleaner designed for household use and not for industrial or professional use by cleaning companies. Never use the vacuum cleaner outdoors or in a garage. Any other use could damage the unit or cause injury.
Specifications
Specification | Details |
---|---|
Model | 10000835 BL3 |
Operating voltage | 220-240 V~, 50-60 Hz |
Power consumption | 800 W (nom.) |
Protection class | Class II |
Off mode power consumption | 0.03 W |
The period after which the equipment goes into off mode | 0 minute |
Assembly
- Connect the extension tube to the attachment's connector.
- Connect the extension tube to the handle-connected suction hose.
- Press to secure it in place. Extend the extension tube to the desired position.
- Connect the suction hose to the connector and unit until it clicks securely into place. The unit is now assembled and ready for use.
Operation
- Connect the power cable's plug to an appropriate mains socket.
- Press the [On/Off Switch]. Move the power selector until the desired power is obtained.
- Hold the handle of the hose and gently move the brush back and forth across the floor.
- If necessary, slide the suction power valve up or down to reduce or increase the suction power.
- Press the [On/Off Switch] to turn off the unit.
- Unplug the unit.
- Press the [Cable Rewind Button] to rewind the power cable.
⚠️ Hold the power cable in your hands whilst it is being rewound.
The storage compartment clip secures the furniture brush and upholstery crevice tool to the vacuum cleaner.
Cleaning Various Types of Flooring (Floor Brush)
For cleaning hard surfaces (parquet flooring, tiles): press the selector to extend the brush.
For cleaning soft surfaces (carpets, rugs): press the selector to retract the brush.
Cleaning and Maintenance
⚠️ Before carrying out any cleaning or maintenance operations, please ensure that the unit has been turned off and unplugged from the mains socket. Let it cool completely!
⚠️ Never immerse the unit in water or any other liquid.
HEPA Filter Cleaning System
- Remove the dust cup and cleaning system.
- Lift the dust cap and empty its contents in a bin.
- Press the dust cup pushbutton to open and automatically empty it. Position the dust cup over your bin before pressing the release button.
- Once the cup is empty, clean the HEPA filter again, if necessary. Rinse the dust cup, then wipe it dry.
⚠️ Practical tip: when the dust cup is full, place it in a plastic bag and then empty the contents into this bag. This will prevent the dust from going everywhere.
Reposition the HEPA filter cleaning system.
Cleaning the Exhaust Air Filter or HEPA Filter
Open the exhaust air grille. The exhaust air filter or HEPA filter will be visible when the grille is open.
- Rinse the exhaust air filter or HEPA filter in cold water and leave to dry.
- Reposition the exhaust air filter or HEPA filter (or replace it if necessary).
- Close the exhaust air filter grille.
Storage
- Always unplug the unit before storing it.
- Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
- Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.
Warranty Information
This product is guaranteed for a period of 2 years from the date of purchase against faults caused by defects in manufacturing or materials. This warranty does not cover defects or damage caused by incorrect installation, incorrect use, or excessive wear and tear.
More Information
For more information and product manuals, visit: