Whirlpool Microwave Oven Dimension Guide
Product Dimensions
Product Dimensions
MODEL # | Unit of Measurement | in | cm |
---|---|---|---|
WMMF5930P/YWMMF5930P/MMMF6030P/YMMMF6030P/KMMF330P/YKMMF330P/WMMF7330R/YWMMF7330R/WMMF7530R/MMMF8030P/YMMMF8030P/KMMF530P/YKMMF530P/KMMF730P/YKMMF730P/JMHF730R/YJMHF730R/JMHF930R/YJMHF930R | Overall Width (A) | 30 | 76 |
Overall Height (B) | 17⁷⁄₈ | 45.4 | |
Height of the door (C) | 15 | 38.2 | |
Depth with door (D) | 12¾ | 32.4 | |
Depth with door open 90° (E) | 41.4 | 105.3 | |
Depth with door with Bump Out Kit (L hook) (F1) | 13.8 | 35.0 | |
Depth with door with Bump Out Kit (M hook) (F2) | 14.3 | 36.3 | |
Depth with door with Bump Out Kit (N hook) (F3) | 14.8 | 37.6 | |
Depth with door with Bump Out Kit (P hook) (F4) | 15.3 | 38.9 | |
Depth with door with Bump Out Kit (R hook) (F5) | 15.8 | 40.2 | |
Depth with door open 90° with Bump Out Kit (L hook) (G1) | 42.5 | 107.8 | |
Depth with door open 90° with Bump Out Kit (M hook) (G2) | 43.0 | 109.1 | |
Depth with door open 90° with Bump Out Kit (N hook) (G3) | 43.5 | 110.4 | |
Depth with door open 90° with Bump Out Kit (P hook) (G4) | 44.0 | 111.7 | |
Depth with door open 90° with Bump Out Kit (R hook) (G5) | 44.5 | 113.0 |
Diagram Description:
FRONT VIEW: Shows a rectangular outline labeled 'A' for width and 'B' for height. 'C' indicates the height of the door.
SIDE VIEW: Shows a rectangular outline with 'A' for width, 'B' for height, and 'C' for door height. 'D' represents the depth with the door closed, and 'E' represents the depth with the door open 90 degrees. 'F1' through 'F5' indicate various depths with bump-out kits, and 'G1' through 'G5' indicate depths with bump-out kits and the door open 90 degrees.
TOP VIEW: Shows a rectangular outline labeled 'A' for width. 'D' and 'E' indicate depths.
TOP VIEW WITH BUMP OUT KIT: Shows a similar top view with additional labels indicating bump-out kit dimensions.
Microwave Interior Cavity Dimensions
MODEL # | Unit of Measurement | in | cm |
---|---|---|---|
WMMF5930P/YWMMF5930P/MMMF6030P/YMMMF6030P/KMMF330P/YKMMF330P/WMMF7330R/YWMMF7330R/WMMF7530R/MMMF8030P/YMMMF8030P/KMMF530P/YKMMF530P/KMMF730P/YKMMF730P/JMHF730R/YJMHF730R/JMHF930R/YJMHF930R | Cavity Height (A) | 9.1 | 23 |
Cavity Width (B) | 18.1 | 46 | |
Cavity Depth (C) | 11 | 27.9 |
Diagram Description:
CAVITY INTERIOR FRONT VIEW: Shows a rectangular outline labeled 'A' for height and 'B' for width.
CAVITY INTERIOR SIDE VIEW: Shows a rectangular outline labeled 'A' for height and 'C' for depth. 'Back of Cabinet' is indicated.
Opening/Clearance Dimensions
MODEL # | OPENING/CLEARANCE DIMENSIONS | in | cm |
---|---|---|---|
WMMF5930P/YWMMF5930P/MMMF6030P/YMMMF6030P/KMMF330P/YKMMF330P/WMMF7330R/YWMMF7330R/WMMF7530R/MMMF8030P/YMMMF8030P/KMMF530P/YKMMF530P/KMMF730P/YKMMF730P/JMHF730R/YJMHF730R/JMHF930R/YJMHF930R | Width of cabinet opening (minimum) (A) | 30 | 76.2 |
Typical height from cooking surface to floor based on 36" (91.4 cm) countertops. (B) | 36 | 91.4 | |
Typical height from top of cabinet to cooking surface based on 36" (91.4 cm) countertops. (C) | 30 | 76.2 | |
Recommened height from top of cabinet to cooking surface based on 36" (91.4 cm) countertops. (C) | 36 | 91.4 | |
Minimum height from floor to top of cabinet opening. (B + C = D). (D) | 66 | 167.6 | |
Recommended height from floor to top of cabinet opening (B + C = D). (D) | 72 | 183 | |
Recommended electrical connection location. (E) | See below schematic | ||
Minimum height from floor to bottom of the microwave oven (F) | 12¹⁄₈ | 30.8 | |
Recommended height from floor to bottom of the microwave oven (F) | 18¹⁄₈ | 46 | |
Minimum height of Flat back surface (G) | 18 | 45.8 |
Diagram Description:
FRONT VIEW: Shows a diagram illustrating cabinet opening dimensions. 'A' indicates the width of the opening. 'B' and 'C' indicate vertical measurements related to the cooking surface and cabinet top. 'D' represents the total minimum height from the floor to the top of the opening. 'E' indicates the electrical connection location. 'F' shows the minimum height from the floor to the bottom of the microwave. 'G' indicates the minimum flat back surface height.
ELECTRICAL REQUIREMENTS: 120 V, 60 Hz AC only, 15 A or 20 A fused electrical supply required. A time-delay fuse or dedicated circuit is recommended. Do not use an extension cord.
LOCATION REQUIREMENTS: Support structure must support 150 lb (68 kg). Mounting plate must attach to a minimum of one 2" x 4" (5.1 cm x 10.2 cm) wall stud. Mounting distance between a fixed wall on the hinged-side of the door and the microwave oven is 5" (12.7 cm).
VENTING REQUIREMENTS: Microwave oven is factory set for recirculating ventilation. For venting through roof or wall, refer to installation instructions.
Opening/Clearance Dimensions (Continued)
MODEL # | Opening/Clearance Measurement | in | cm |
---|---|---|---|
WMMF5930P/YWMMF5930P/MMMF6030P/YMMMF6030P/KMMF330P/YKMMF330P/WMMF7330R/YWMMF7330R/WMMF7530R/MMMF8030P/YMMMF8030P/KMMF530P/YKMMF530P/KMMF730P/YKMMF730P/JMHF730R/YJMHF730R/JMHF930R/YJMHF930R | Depth of upper cabinet (minimum-maximum) Stand Out* (A) | 12~12.75 | 30.5~32.4 |
Depth of upper cabinet (minimum-maximum) Flush* (B) | 12.75~13 | 32.4~33 | |
Depth of upper cabinet (minimum-maximum)* (C) | 0.5 | 1.27 | |
Can this product be installed flush? Flush refers to there appliance not protruding past the cabinet depth. (Y/N) | (A) N (B) Y |
*This microwave oven is factory set for 12" (30.5 cm)~13" (33.02 cm) depth of upper cabinet, install with the provided mounting plate.
Diagram Description:
SIDE VIEW: Shows a side view of the microwave installed in a cabinet. 'B' indicates the depth of the upper cabinet (flush). 'C' indicates the depth of the upper cabinet (stand out). 'Mounting Plate' is shown.
SIDE VIEW: Shows another side view with 'A' indicating the depth of the upper cabinet (stand out). 'Mounting Plate' is shown.
BACK VIEW: Shows the back of the microwave and cabinet.
Opening/Clearance Dimensions (Continued)
MODEL # | OPENING/CLEARANCE DIMENSIONS | in | cm |
---|---|---|---|
WMMF5930P/YWMMF5930P/MMMF6030P/YMMMF6030P/KMMF330P/YKMMF330P/WMMF7330R/YWMMF7330R/WMMF7530R/MMMF8030P/YMMMF8030P/KMMF530P/YKMMF530P/KMMF730P/YKMMF730P/JMHF730R/YJMHF730R/JMHF930R/YJMHF930R | Depth of upper cabinet (minimum-maximum) Flush* (A1) | 13¾~14 | 35~35.6 |
Depth of upper cabinet (minimum-maximum) Stand out* (A2) | 13~13¾ | 33~35 | |
Depth of upper cabinet (minimum-maximum) Flush* (B1) | 14¼~14½ | 36.2~36.8 | |
Depth of upper cabinet (minimum-maximum) Stand out* (B2) | 14~14¼ | 35.6~36.2 | |
Depth of upper cabinet (minimum-maximum) Flush* (C1) | 14¾~15 | 37.5~38.1 | |
Depth of upper cabinet (minimum-maximum) Stand out* (C2) | 14½~14¾ | 36.8~37.5 | |
Depth of upper cabinet (minimum-maximum) Flush* (D1) | 15¼~15½ | 38.7~39.4 | |
Depth of upper cabinet (minimum-maximum) Stand out* (D2) | 15~15¼ | 38.1~38.7 | |
Depth of upper cabinet (minimum-maximum) Flush* (E1) | 15¾~16 | 40~40.6 | |
Depth of upper cabinet (minimum-maximum) Stand out* (E2) | 15½~15¾ | 39.4~40 | |
Back of the microwave oven to back of the cabinet or Wall (F) | 1.5~3.5 | 3.8~8.9 | |
Can this product be installed flush? Flush refers to the appliance not protruding past the cabinet depth. (Y/N) | (A1, B1, C1, D1, E1) Y (A2, B2, C2, D2, E2) N |
*For the depth of upper cabinet larger than 13" (33.02 cm), and less than or equal to 16" (40.64 cm) depth of upper cabinet, install with the optional bump out mounting kit W11630300, the bump out mounting kit is not provided, but can purchased from Whirlpool®.
Diagram Description:
SIDE VIEW: Illustrates cabinet depth measurements for flush and stand-out installations. 'DEPTH = A1, B1, C1, D1, E1' refers to flush installation depths. 'DEPTH = A2, B2, C2, D2, E2' refers to stand-out installation depths. 'Bump Out Mounting Kit' is shown.
SIDE VIEW: Another side view showing 'A' for depth and 'Mounting Plate'.
BACK VIEW: Shows the back view of the installation.
Important Notes
Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information. Refer to the Installation Guide before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation. All appliances are appropriately UL, CUL or CSA approved.