Whirlpool WOI98FPT2SBA Built-In Electric Oven
Model: WOI98FPT2SBA
GTIN (EAN) Code: 8003437836343
12NC/Fx: 859991680940
Installation Dimensions
The following tables provide detailed dimensions for the installation of the Whirlpool WOI98FPT2SBA built-in electric oven.
Overall Cabinet Dimensions
These dimensions specify the requirements for the cabinet in which the appliance will be installed.
| Dimension | Measure | Unit |
|---|---|---|
| MIN Height of the wall cabinet niche, including all required space for installation or ventilation | 583 | mm |
| MIN Height of the tall cabinet niche, including all required space for installation or ventilation | 595 | mm |
| MIN Height of the base cabinet niche, including all required space for installation or ventilation | 595 | mm |
| MAX Height of the wall cabinet niche, including all required space for installation or ventilation | 585 | mm |
| MAX Height of the tall cabinet niche, including all required space for installation or ventilation | 596 | mm |
| MAX Height of the base cabinet niche, including all required space for installation or ventilation | 596 | mm |
| MIN Width of the wall cabinet niche, including all required space for installation or ventilation | 560 | mm |
| MIN Width of the tall cabinet niche, including all required space for installation or ventilation | 560 | mm |
| MIN Width of the base cabinet niche, including all required space for installation or ventilation | 560 | mm |
| MAX Width of the wall cabinet niche, including all required space for installation or ventilation | 568 | mm |
| MAX Width of the tall cabinet niche, including all required space for installation or ventilation | 568 | mm |
| MAX Width of the base cabinet niche, including all required space for installation or ventilation | 568 | mm |
| MIN Depth of the wall cabinet niche, including all required space for installation or ventilation | 550 | mm |
| MIN Depth of the tall cabinet niche, including all required space for installation or ventilation | 550 | mm |
| MIN Depth of the base cabinet niche, including all required space for installation or ventilation | 550 | mm |
| Space in front, which is required to install bottom trim | 10 | mm |
| Indicates whether a ventilation opening is needed or not. Default is "N" | Yes |
Cabinet Type: Wall Cabinet (Vent-shaft Incoming)
| Dimension | Measure | Unit |
|---|---|---|
| Indicates the position of the freespace for the inbound airflow (wall cabinet) | Rear | |
| Minimum space for inbound ventilation (wall cabinet) | 0 | mm |
| Minimum area for inbound ventilation cavity (wall cabinet) | 0 | cm² |
Cabinet Type: Wall Cabinet (Vent-shaft Outgoing)
| Dimension | Measure | Unit |
|---|---|---|
| Indicates the position of the freespace for the outbound airflow (wall cabinet) | Rear | |
| Minimum space for outbound ventilation (wall cabinet) | 0 | mm |
| Minimum area for outbound ventilation cavity (wall cabinet) | 0 | cm² |
Cabinet Type: Tall Cabinet (Vent-shaft Incoming)
| Dimension | Measure | Unit |
|---|---|---|
| Indicates the position of the freespace for the inbound airflow (tall cabinet) | Rear | |
| Minimum space for inbound ventilation (tall cabinet) | 30 | mm |
| Minimum area for inbound ventilation cavity (tall cabinet) | 150 | cm² |
Cabinet Type: Tall Cabinet (Vent-shaft Outgoing)
| Dimension | Measure | Unit |
|---|---|---|
| Indicates the position of the freespace for the outbound airflow (tall cabinet) | Rear | |
| Minimum space for outbound ventilation (tall cabinet) | 0 | mm |
| Minimum area for outbound ventilation cavity (tall cabinet) | 150 | cm² |
Cabinet Type: Base Cabinet (Vent-shaft Incoming)
| Dimension | Measure | Unit |
|---|---|---|
| Indicates the position of the freespace for the inbound airflow (base cabinet) | Rear | |
| Minimum space for inbound ventilation (base cabinet) | 30 | mm |
| Minimum area for inbound ventilation cavity (base cabinet) | 150 | cm² |
Cabinet Type: Base Cabinet (Vent-shaft Outgoing)
| Dimension | Measure | Unit |
|---|---|---|
| Indicates the position of the freespace for the outbound airflow (base cabinet) | Rear | |
| Minimum space for outbound ventilation (base cabinet) | 0 | mm |
| Minimum area for outbound ventilation cavity (base cabinet) | 150 | cm² |
Appliance Dimensions
| Dimension | Measure | Unit |
|---|---|---|
| Height of the front | 597 | mm |
| Width of the front | 595 | mm |
| Depth of the front | 572 | mm |
| Maximum depth all protruding elements, e.g. handles, controls | 595 | mm |
| Lateral clearance between front edge and most protruding elements which avoid to open a neighbour front more than 90 degrees | 41 | mm |
| Projection of front in relation to housing of appliance | 18 | mm |
| Projection of front in relation to bearing area of the appliance. Taken at minimum height of appliance, if height is adjustable | 7 | mm |
| When product panel is missing, set to 0 | 97 | mm |
| Space in front, which is required to guarantee full operability. The most protruding part gives this dimension | 462 | mm |
| Height from bearing area of appliances and lower handle | 471 | mm |
| Frontal handle thickness | 41 | mm |
| Frontal handle width | 589 | mm |
| MIN Height of the product body | 572 | mm |
| MAX Height of the product body | 572 | mm |
| Width of the product body | 546 | mm |
| Depth of the product body | 543 | mm |
| Full depth of product excluding protruding interface elements | 564 | mm |
| Appliance can be used as base for other appliances from the same manufacturer. Default is "No" | No |
Appliance Flap Door
| Dimension | Measure | Unit |
|---|---|---|
| Projection of the opened flap in relation to bearing area | 0 | mm |
| Maximum angle when flap door is opened totally | 89 | ° |
Appliance Side Swing Door
| Dimension | Measure | Unit |
|---|---|---|
| Lateral projection of front incl. controls when door is opened totaly. At the side where the hinge is mounted | 0 | mm |
| Lateral projection of opened front at the side where the hinge is fixed | 0 | mm |
| Maximum angle when door is opened totally | 0 | ° |
Appliance Other
| Dimension | Measure | Unit |
|---|---|---|
| Depth from front end of the niche to the front end of the freespace of the retrace | 345 | mm |
| Height from niche to bottom end of freespace for the retrace | 537 | mm |
Diagram Description: The primary diagram illustrates the overall installation dimensions for built-in ovens, showing clearances and niche sizes for wall, tall, and base cabinets. It includes specific measurements for width, height, and depth, as well as ventilation requirements. A detailed inset shows the angle of the flap door opening (89 degrees) and related clearances.
Related Documents
 |
Whirlpool Microwave Oven Dimension Guide: WMCS7024PB, WMCS7024PW, WMCS7024PZ, UMCS5022PZ Detailed dimension specifications for Whirlpool microwave ovens, including models WMCS7024PB, WMCS7024PW, WMCS7024PZ, and UMCS5022PZ. Provides overall product and interior cavity measurements in inches and centimeters. |
 |
Whirlpool Double Oven WOD52ES4M: Dimensions and Electrical Requirements Guide Provides detailed product dimensions, opening/clearance specifications for traditional and flush installations, and electrical requirements for the Whirlpool WOD52ES4M Double Oven. |
 |
Whirlpool WOED5030L Electric Double Wall Oven Dimension Guide Comprehensive dimension guide for the Whirlpool WOED5030L Electric Double Wall Oven, detailing installation requirements, cabinet dimensions, and electrical specifications for safe and proper setup. |
 |
Whirlpool Microwave Oven Dimension Guide Detailed dimension guide for Whirlpool microwave ovens, including product dimensions, cavity dimensions, and opening/clearance dimensions for models WMMF5930P, YWMMF5930P, MMMF6030P, YMMMF6030P, KMMF330P, and YKMMF330P. |
 |
Whirlpool Dryer Dimension Guide for YWED5010LW, WED5050LW, YWED5050LW, WGD5050LW Models Detailed dimension guide for Whirlpool YWED5010LW, WED5050LW, YWED5050LW electric dryers and WGD5050LW gas dryers. Includes electrical requirements, product dimensions, and installation spacing for recessed or closet setups. |
 |
Whirlpool 69" Full-Depth French Door Refrigerator: Dimensions & Specifications Comprehensive product dimensions, electrical requirements, and installation guidelines for the Whirlpool 69-inch Full-Depth French Door Refrigerator. Includes detailed measurements for the unit and its compartments, plus essential safety and placement information. |
 |
Whirlpool Dryer Dimension Guide: Models WED4900LW & WGD4900LW Detailed dimension guide for Whirlpool electric (WED4900LW) and gas (WGD4900LW) dryers, including electrical requirements, product dimensions, and installation spacing for recessed or closet areas. |
 |
Whirlpool Electric Built-in Cooktop Installation and Dimensions Detailed installation guidelines and cabinet opening dimensions for Whirlpool electric built-in cooktops, including model numbers G7CE3034X, G7CE3055X, G7CE3635X, G7CE3655X, G9CE3065X, G9CE3074X, G9CE3675X, W5CE3024X, W5CE3625A. |