Gadnic P2P00027 Security Camera User Manual

Mobile Application Operation Manual

This section guides users through setting up and operating the Gadnic security camera using the mobile application.

1. Download the YOOSEE App: Search for "YOOSEE" in your device's app store (Google Play or App Store) and download it. Alternatively, scan the provided QR codes (Note: QR codes are not rendered in this HTML output).

2. Register Your Account: Create a new account or log in to your existing YOOSEE account.

3. Connect the Camera to Your Device:

   • A. Placement: Position the camera and your mobile phone near your Wi-Fi router, ensuring a strong Wi-Fi signal.

   • B. Power On and Activation: Turn on the camera. Wait approximately 30 seconds for the activation sound. Hint: If the camera does not emit an activation sound, use a pin to press and hold the RESET button on the device for 5 seconds to perform a reset. After resetting, wait another 30 seconds for the activation sound.

   • C. Log In: After downloading and registering, log in to the YOOSEE app on your mobile phone.

   • D. Add Device: Click the "+" icon located in the upper right corner of the app interface.

   • E. Select Device Type: Click on "Add New Device".

   • F. Network Connection: Select "SMARTLINK". You will hear a connection sound. Enter your Wi-Fi password and click "next". Wait for the device to connect to the network.

   • G. Device Configuration: Follow the app's prompts to enter the device password (default is 123, but it can be changed). Click "next", then assign a name to the device or enter it manually. Click "confirm" to view "all devices".

   NOTE: If the connection fails, the connection sound is not heard, the Wi-Fi password is incorrect, or any other issue arises during this step, please reset the camera and attempt the connection again.

   ATTENTION: This device is not compatible with 5G Wi-Fi networks.

Computer User's Operating Manual

This section explains how to set up and operate the Gadnic security camera using a computer.

1. Download the CMS App: Access the website http://www.yoosee.co to download the CMS application for your PC.

2. Launch CMS: Open the CMS application on your computer and click "OK" to log in.

3. Add Device: Click the "+" icon on the left side of the screen. This will automatically search for local devices. Select the desired device using the ">>" button in the device list on the right, then click "exit". To add a remote device, click "add device manually". To share the device with others, click "add shared devices". Finally, click "OK" and then "exit" to return to the main display interface.

4. Configure Local Device:

   • A. Access Properties: Close the current image display. Right-click on the device in the device list.

   • B. Enter Password: Select "Device Properties" and enter the device password (default password is 123).

   • C. Start Monitoring: Select "start monitoring" to begin viewing the video feed.

   • D. Adjust Quality: For high-quality viewing, select "fluid, standard definition, high definition".

   • E. Change Parameters: To adjust settings, select "Configure IPC".

Parts of the Camera

The camera unit features the following components:

• Camera Lens: The primary visual sensor.
• Microphone: For audio capture.
• Gadnic Branding: The brand name is visible on the unit.
• Micro SD Slot: For inserting a memory card for local storage.
• Power Port: Connection point for the power adapter.
• LED Indicator: Provides status information (e.g., power, connection).

The Set Includes

The package for the Gadnic P2P00027 security camera typically contains:

• The security camera unit.
• A power adapter with a connecting cable.
• A mounting bracket for wall or surface installation.
• A motion sensor.
• A small circular device, likely a sensor base or accessory.