Gadnic G200 Gimbal Stabilizer

1. Introduction

The G200 Gimbal is a three-axis handheld gimbal designed specifically for mobile phones. It assists in taking photos with mobile phones, effectively eliminating external fluctuations caused by the capture process and creating stable and smooth images. The G200 supports both vertical and horizontal phone positioning. The mobile phone's filming angle can be adjusted manually and quickly using the button to meet the needs of filming and producing photo and video captures.

By using this product with the G200 application, you can experience a variety of photography functions such as hyperlapse, intelligent tracking, and panorama.

Gimbal Components:

• 1. Mobile phone holder
• 2. Handle
• 3. Adjustable handle
• 4. Horizontal motion motor
• 5. Battery indicator
• 6. Power on/off or mode button
• 7. Capture button
• 8. Activation button (by signal)
• 9. Control stick
• 10. Holding motor
• 11. Tilt motor
• 12. Mode indicator
• 13. Micro USB
• 14. Rotation motor
• 15. Zoom wheel

2. Packing List

The packing list includes:

• Gimbal x1
• Charger x1
• Counterweight x1
• Instructions x1
• Customer service card x1

3. Download and Install the Application

Search for the "G200" application in the App Store or scan the QR code to install the application on your mobile phone.

4. Charging

To charge the Gimbal G200, connect the gimbal to the charger using the power cable. The charging time is approximately 2.5 hours, and the maximum runtime is 12 hours.

The red LED light flashes when charging, and the green LED light is always on when charging is complete.

You can check the battery status via the indicator. The green LED light turns on when the battery is fully charged, the red LED light is on when the charge percentage is less than 30%, and it flashes red when the charge is less than 10%.

5. Operation Instructions

5-1. Mounting the Mobile Phone

Please mount and balance the mobile phone when the gimbal is turned off.

a. Place the mobile phone in the holder while pulling the holder. It is recommended to keep the mobile phone close to the right.

b. Please mount and balance the mobile phone when the gimbal is turned off.

Ensure your phone is installed correctly.

5-2. Powering On/Off

• Power On: Press the power on/off button for 3 seconds to turn it on after balancing the phone.
• Power Off: Press the power on/off button for 3 seconds to turn it off.

5-3. Connecting to the Application

• Turn on the Gimbal.
• Enable Bluetooth on your mobile phone.
• Open the G200 application.
• Search for the Bluetooth option and connect to the gimbal.

5-4. Controls

• Battery Indicator: [Battery Status Indicator]
• Power On/Off Lamp: [Power Status Indicator]
• Mode Indicator: [Mode Status Indicator]
• Operation Mode: [Mode Description]
• Control Stick: Move horizontally or tilt the mobile phone.

Power On/Off and Mode Button: Press for 3 seconds to turn on or off, then tap once to switch modes.

Capture Button: Tap once to capture and press for 2 seconds to record a video, tap once more to finish recording.

Activation Button (by signal): Press and hold to switch to lock mode and release to return to origin mode; double-tap quickly to switch to power on/off state. You can define the function of the activation button (by signal) as phone mode in the app.

Zoom Wheel: Rotate to zoom in or out; press and then rotate to tilt the mobile phone. You can also define and set specific functions from the app, for example, move the mobile phone horizontally using the focus wheel.

5-5. Mode Description

6. Calibration

If there is an offset after powering on, place the mobile phone on the gimbal, connect to the app via Bluetooth, tap the calibration button while the gimbal remains still, and wait for 15 seconds. During this time, the gimbal will calibrate and automatically enter sleep mode, then restart in seconds.

Calibration Process: Please keep the gimbal still. After pressing the calibration button, the gimbal will calibrate in sleep mode. Restart after 15 seconds.

7. Tutorial Video

Scan the QR code to watch the tutorial video.

8. Basic Parameters

9. Warranty

• Gimbal G200 (Battery included): 12 months
• G200 Charger: No warranty period

10. Disclaimer and Warning

Congratulations on your purchase of the Gimbal G200. The information in this document affects your safety and legal rights and responsibilities. Please read the document carefully to ensure proper use and setup before using it. Failure to read and follow the instructions and warnings in the document may result in serious injury to yourself or others, damage to your Gimbal G200 product, or damage to other nearby objects.

Funsnap Technology reserves the right of final interpretation of the document. All contents are subject to change without prior notice. Visit Funsnap Technology (www.fun-snap.com) for the latest product information.

By using this product, you indicate that you have read this disclaimer and warning carefully, and that you understand and agree to comply with the terms and conditions of this document. Funsnap does not accept any responsibility for damages, injuries, or any legal liability incurred directly or indirectly by the use of these products. The user shall observe safe and legal practices, including, but not limited to, those set forth in the document.

A. Safety Rules

1. The Gimbal G200 is not waterproof. Do not allow the product to come into contact with any liquid. Do not leave the product in the rain or near a moisture source. Do not drop the product into water. If the inside of the battery comes into contact with water, chemical decomposition may occur, which could cause the battery to ignite and even explode.
2. Turn off any product immediately to avoid serious damage.
3. The product should not be used in temperatures between 0°C to 40°C. Do not heat the product. Very high or very low temperatures can shorten the product's lifespan.
4. Please pay attention to product safety. Do not hit or drop the product. Do not place heavy objects on the product.
5. Never disassemble the product in any way, or the battery could leak, ignite, or explode.
6. Discharge the battery to 40%~65% if it will not be used for a very long period. Do not store the product fully discharged for long periods, otherwise, it will over-discharge and cause permanent damage. Discharge approximately every 3 months to maintain battery activity.