Tridonic basicDIM Wireless Passive Module G2

Installation and Technical Overview

Product Overview

The basicDIM Wireless Passive Module G2 is a Bluetooth® DALI controller featuring 4 freely configurable push-button inputs ?. The module is powered by the DALI bus, eliminating the need for an additional mains supply.

Wiring Diagrams Description

The document illustrates three primary wiring configurations:

Wiring with external DALI PS: Depicts the module connected to an external DALI power supply (PS) unit, which then interfaces with an LED driver. Connections include 220-240V AC mains, DALI bus (DA/N, DA/L), and LED driver terminals (Isel2-1, Isel2-2 (GND), +LED, -LED).
Wiring with integrated DALI PS: Similar to the external PS setup, but the DALI power supply is integrated directly into the LED driver.
Wiring with DALI MSensor and DALI PS: Shows the module connected to a DALI MSensor for presence and daylight detection, alongside a DALI PS and LED driver, enabling more advanced lighting control scenarios.

General Wiring Specifications:

Mains supply / DALI wires: Use 0.2-1.5 mm² (16-24 AWG) solid or fine-stranded wires.
Push-button wires: Use 0.14-0.5 mm² wires.
Wire stripping: 8.5-9.5 mm at the cable end for mains/DALI connections.

Technical Data

Parameter	Value
Supply voltage DC (acc. IEC 62386-101)	9.5-22.5 V
Current consumption of DALI	4 mA (30 mA at start)
Max. DALI bus current	250 mA
Typ. power input on stand-by	< 0.09 W
Input	4 push-buttons ?
Max. cable length push button	5 m at 0.2-1.5 mm²
Operating frequency radio receiver	2.4-2.483 GHz
Max. output power radio receiver	+4 dBM
Output	DALI (compatible)
Assignable DALI addresses	4 (Max. 4 single/group addresses, others via broadcast)
Ambient temperature	-20 to +70 °C
tc point	75 °C
Storage temperature	-25 to +75 °C
Dimensions (LxWxH)	80.7 x 30 x 15.3 mm
Type of protection	IP20

Installation Instructions

Installation must be carried out by qualified personnel only.
Ensure the mains voltage is switched off before making any connections.
Use appropriate wire gauges: 0.2-1.5 mm² for mains/DALI terminals and 0.14-0.5 mm² for push-button terminals.
Strip wires to 8.5-9.5 mm from the end.
Verify that input and output connections are made correctly.
Screw fixings can be removed if necessary.

Safety Instructions

Installation should only be performed by specialists who have proven their qualifications.
Always switch off the power supply before handling the device.
Adhere to all relevant safety and accident prevention regulations.

Areas of Application

The device must be used only for its specified applications.
Install in a dry, clean environment for safe operation.
Install in a manner that requires a tool for access to connections.

Compatible Devices

Android devices with version 4.4 (KitKat) or later.
iPhone 4S (iOS 5.0) or later.
iPad 3 (iOS 5.1) or later.

Declarations of Conformity

Tridonic declares that the radio equipment type basicDIM Wireless Passive Module G2 complies with Directive 2014/53/EU and UK SI 2017 No. 1206.

The full text of the declaration is available at: https://trid.help/en28003541cer

Antenna Location

The antenna is located on the top of the device.

	Tridonic basicDIM Wireless Passive Module G2 Installation Guide Installation and technical data for the Tridonic basicDIM Wireless Passive Module G2, a Bluetooth DALI controller with 4 configurable push-button inputs. Includes wiring diagrams, specifications, safety, and application information.
	Tridonic Industry: LED Lighting Solutions for Industrial Applications Comprehensive overview of Tridonic's LED lighting solutions for industrial environments, featuring drivers, sensors, and LED modules designed for reliability, efficiency, and demanding conditions.
	TRIDONIC basicDIM ILD G2 FSL Programmer: Parameter Settings and Functions A comprehensive technical guide detailing the parameter settings, command sets, basic functions, programming options, and advanced features of the TRIDONIC basicDIM ILD G2 FSL Programmer for intelligent lighting control.
	Tridonic basicDIM Wireless User Interface Quick Guide A concise guide to the Tridonic basicDIM Wireless User Interface, covering device layout, initial setup, installation, app integration, and compliance information.
	Tridonic LED Drivers: Premium, Excite, Advanced, Essence Series Product Overview Explore Tridonic's comprehensive range of LED drivers, including Premium (PRE), Excite (EXC), Advanced (ADV), and Essence (SNC) series. Discover features like DALI-2 compatibility, NFC programming, and various form factors for diverse lighting applications.
	Tridonic basicDIM DGC: Kompaktes DALI/DSI Lichtsteuerungsmodul Technisches Datenblatt für das Tridonic basicDIM DGC, ein kompaktes Lichtsteuerungsmodul mit DALI/DSI-Ausgang, Sensoreingang und Relaisausgang. Enthält Spezifikationen, Bestellinformationen, Zubehör, Installationsanleitungen und Funktionsbeschreibungen.
	Tridonic sceneCOM Lighting Management System: Commissioning and Maintenance Manual Explore the Tridonic sceneCOM lighting management system with this official commissioning and maintenance manual. Learn about system setup, device configuration, scene management, emergency lighting integration, and operational best practices for efficient and intelligent lighting control.
	TRIDONIC LCA 75W 250-750mA LED Driver: Technical Data & Specifications This document provides comprehensive technical data and specifications for the TRIDONIC LCA 75W 250-750mA one4all C PRE OTD LED Driver, designed for premium outdoor applications. It details product features, housing, interfaces, functions, benefits, typical applications, and detailed technical specifications including electrical values, dimming capabilities, and safety standards.