Monster Rockin Roller 2 User Manual

Table of Contents

This document provides instructions for the Monster Rockin Roller 2. Key sections include:

• Important Safety Instructions
• Unpacking
• Parts Description
• Getting Started (Bluetooth, NFC)
• Connection using AUX Input
• FM / USB Charging
• Auto Standby
• Troubleshooting
• Specifications
• Limited Warranty

Important Safety Instructions

To prevent fire or shock hazard, do not use this plug with an extension cord, receptacle, or other outlet unless the blade can be fully inserted to prevent blade exposure. Do not expose this appliance to rain or moisture.

⚡ The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

⚠️ [CAUTION: RISK OF ELECTRIC SHOCK - DO NOT OPEN]

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ⓘ The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1. READ INSTRUCTIONS - All safety and operating instructions should be read before the product is operated.
2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS - All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
5. CLEANING - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.
6. ATTACHMENTS - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. ACCESSORIES - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions and use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved carefully; quick stops, excessive force, and uneven surfaces might cause the product and cart combination to overturn.
8. VENTILATION - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation, such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

9. POWER SOURCES - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

10. GROUNDING OR POLARIZATION - This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature: If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

11. POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point of exit from the product.

12. NON-USE PERIODS - The power cord of the product should be unplugged from the outlet when left unused for long periods of time.

13. Do not use this apparatus near water.

14. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

16. Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.

17. Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Unpacking

Check that you have all of the following items. If any item is missing, please contact the customer service hotline for assistance. The hotline number is printed on the cover page of this user manual.

• Monster Rockin' Roller 2 Unit
• AC Power Cable
• User Manual (with Warranty Statement)
• Quick Start Guide

Part Descriptions

The Monster Rockin Roller 2 has the following parts:

• 1. Handle
• 2. Ruggedized Housing
• 3. Telescoping Roller Handle
• 4. Battery level indication
• 5. Power on/Power off key
• 6. Charging Port
• 7. AC Outlets
• 8. In-Line Wheels
• 9. USB Ports
• 10. LED Interface
• 11. Source Select
• 12. BT pairing key
• 13. LED lights on/off key
• 14. LED Lights
• 15. Radio Preset
• 16. AUX Input
• 17. Volume Knob

Getting Started

Power Connection

To connect the speaker to power:

• Connect the supplied AC cable to the speaker's power input.
• Plug the AC cord into a wall outlet.

Power On/Off Switch

To turn the unit on:

• Switch the mechanical Power On/Off switch to the 'ON' position.
• The Power Green LED will turn on.
• The unit will enter Bluetooth mode, indicated by the Bluetooth LED flashing blue.

If a 3.5mm Stereo Audio cable is plugged in during Power On mode, the unit will automatically enter AUX mode.

Charging Battery

To charge the battery:

• Connect the speaker to AC power. The battery will begin charging.
• Red LED flashing: Indicates the battery level is low and needs charging.
• All Green LEDs on: Indicates the battery level is full.
• For the first use, charge the battery for approximately 6 hours.

Bluetooth Connection (Bluetooth Device)

To pair your Bluetooth device:

• Place the speaker and your Bluetooth device no more than 3 feet apart.
• Press and hold the ? (Bluetooth) button on the speaker for 2 seconds to enter Bluetooth pairing mode. The BT Blue LED will flash.
• Ensure Bluetooth is enabled on your Bluetooth device.
• On your Bluetooth device, search for Bluetooth devices. You will find the unit listed as "Monster Rockin' Roller".
• Once selected, your Bluetooth device will indicate "Connected", and you will hear a confirmation sound from the speaker.
• The Bluetooth LED turns solid blue upon completion of pairing.

Bluetooth, NFC Pairing

To pair using NFC:

• Turn the speaker on and enter Bluetooth pairing mode by pressing and holding the ? (Bluetooth) button.
• Enable Bluetooth and NFC on your compatible mobile device.
• Tap your mobile device onto the NFC logo on the speaker.
• The Bluetooth Blue LED Indicator will turn solid upon successful pairing.

Connection Using AUX Input

To connect an external audio device via the AUX input:

• Plug a 3.5mm Stereo Audio wire into the Aux-In input on the speaker. The unit will enter Aux mode, and the BT Blue LED Indicator will turn off.
• You can connect any audio device with a 3.5mm audio output jack to play audio.
• All playback functions (Play, Pause, Next, Previous, Volume Up & Volume Down) can be controlled from the connected audio device.

FM / USB Charging

Listening to FM Radio

• Press the "Source" button to select FM source. The radio station frequency will be displayed on the screen.
• Press and hold ⏪ (Previous) or ⏭️ (Next) to automatically search for a station with the strongest reception.

Store Your Favorite Six Radio Stations Manually

• Tune to the desired radio station.
• Press and hold a number key (1-6) to enter programming mode. The corresponding number blinks on the screen, indicating the station is saved to that preset.
• Repeat steps 1-2 to store additional stations.

Select a Favorite Radio Station

• Press the "Source" button to select FM source.
• Press the number keys (1-6) to select one of your favorite radio stations to listen.

USB Charging

The speaker features a built-in USB power bank:

• Connect your USB cable to one of the two USB power ports on the speaker.
• You can connect and charge devices like an iPhone, iPad, or any Android device (USB cable not included).

EQ Presets

When in Bluetooth or AUX mode, you can customize your listening experience by pressing the preset buttons:

• 1: FLAT
• 2: JAZZ
• 3: ROCK
• 4: POP
• 5: CLASSICAL
• 6: DEFAULT

Auto Standby / Wake Up

Auto Standby

The unit will enter Standby mode automatically under the following conditions:

• Bluetooth: When there is no BT connection, or if a BT connection fails, or if the BT connection has been disconnected for 15 minutes. The BT LED Signal will turn off.
• AUX: When the unit is in AUX mode and no AUX cable has been detected.
• Work Mode: Pressing and holding the volume knob key for 3 seconds will automatically enter the unit into Standby Mode.

"Wake up" from Standby Mode

If the unit is in Standby mode, press and hold the volume knob for 1 second. The unit will turn on and return to the latest source mode. The Power Red LED Signal will turn off, and the LED Screen will display the latest source once the unit is in work mode.

Troubleshooting

General

No Power

• Check that the AC power cord is securely inserted in the unit and the electrical outlet.
• Check the Power On/Off switch is turned to the 'On' position.
• If the battery is flat, plug in the AC power cord to charge and operate.

Keys No Response

• Turn the Power On/Off switch to 'Off', and then 'On' again to reset the unit.
• Unplug the AC power cord and plug it back in.

No Sound Heard

• Make sure the Aux connected device volume is turned to a reasonable level.
• Make sure the Bluetooth connected device is outputting audio through Bluetooth.
• Make sure the Bluetooth connected device volume is turned to a reasonable level.

Bluetooth Operations

Audio quality is poor

• Bluetooth reception is poor. Move the Bluetooth device closer to the speaker.

Cannot pair to Bluetooth device

• Make sure both the Bluetooth device and speaker are not connected to any other Bluetooth devices.
• Make sure the Bluetooth On/Off switch located below the speaker is slid to the 'On' position.
• Make sure the Blue LED on the speaker is flashing rapidly (indicating pairing mode).
• Turn the power switch to 'Off', and then 'On' again. Press and hold the BT button for 2 seconds to enter pairing mode.

Specifications

Key Functions

• Power On/Off Key: Switch "Power" key to "I" (On) or "O" (Off).
• Source Key: Press to change source between "BT", "Aux In", or "FM".
• Volume Knob: 1. Rotate to increase/decrease volume. 2. Press and hold for 3s to enter standby status.
• Bluetooth Pairing: 1. Press and hold the Pairing key for 2s to enter pairing mode. 2. Press and hold the pairing key for 8s to clear any previous Bluetooth pairing.
• Previous/Next Key: In FM mode, press and hold to auto-search radio stations.
• Preset 1,2,3,4,5,6: Short press to play preset station. Long press to store current station to preset.
• Battery Level Indicated LED On/Off key: Press to view battery level.

Bluetooth

• Bluetooth Version: 3.0 + EDR
• Bluetooth Profile: A2DP, AVRCP
• Bluetooth Frequency Brand: 2.4GHz ~ 2.48GHz
• Bluetooth Range: 10m (33ft.)

Connections

• 3.5mm Aux In: Yes
• USB Port: USB x 2 (5V 1.2A each)
• AC In: Yes
• AC Out: Yes x 2 (Passthrough)

Limited Warranty

This Monster-branded product is warranted by Russell Distribution Company, LLC against manufacturing defects in materials and workmanship for a limited warranty period of Ninety (90) Days for Labor and One (1) year for Parts, starting from the original date of purchase.

This Limited Warranty is conditioned upon proper use of the Product by the Purchaser and does not apply to products sold as display items, "marked down" specials, "close outs", "open box", or products missing accessories.

Proof of purchase (Bill of Sale, Receipt, or Receipted Invoice) is required for warranty service. The warranty is valid only on Products purchased through authorized dealers and used in the United States and Puerto Rico by the original Purchaser.

Russell Distribution Company, LLC will repair or replace the defective Product at no charge with the same or similar product. Replacement parts and products become the property of the company. Replacement parts and products assume the remaining original limited warranty, or ninety (90) days, whichever is longer.

Product freight must be prepaid by the original Purchaser. The company is not responsible for or obligated to replace damaged Products during shipping.

This limited warranty covers manufacturing defects encountered in normal, noncommercial use. It does not apply to damage occurring in shipment, installation, misuse, abuse, neglect, fire, water, lightning, or other acts of nature, unauthorized repairs, incorrect voltage, or failure to follow operating instructions.

There are no express or implied warranties other than those listed. Any implied warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE are limited to the duration of this Limited Warranty. Russell Distribution Company, LLC shall not be liable for any incidental or consequential damages. This warranty is non-transferable and states your exclusive remedy.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

Ver. 130828-i