Monster Rockin' Roller 2
User Manual
Important Safety Instructions
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE SCAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIST.
[lightning flash symbol] The lightning flash with arrow-head symbol, within an equilateral triangle is intended to alert the user to the presence of insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
[caution symbol] RISK OF ELECTRIC SHOCK DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
[exclamation point symbol] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
- READ INSTRUCTIONS - All the safety and operating instructions should be read before the product is operated.
- RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference.
- HEED WARNINGS - All warnings on the product and in the operating instructions should be adhered to.
- FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
- CLEANING - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.
- ATTACHMENTS - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
- ACCESSORIES - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer instructions, and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved carefully; quick stops, excessive force and uneven surfaces might cause the product and cart combination to overturn.
- VENTILATION - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation, such as a bookcase or rack, unless proper ventilation is provided or the manufacturer instructions have been adhered to.
- POWER SOURCES - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
- GROUNDING OR POLARIZATION - This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature: If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
- POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point of exit from the product.
- NON-USE PERIODS - The power cord of the product should be unplugged from the outlet when left unused for long periods of time.
- Do not use this apparatus near water.
- Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
- Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
FCC Compliance
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
Unpacking
Check that you have all of the following items. If any item is missing, please contact the customer service hotline for assistance. The hotline number is printed on the cover page of this user manual.
- Monster Rockin' Roller 2 Unit
- AC Power Cable
- User Manual (with Warranty Statement)
- Quick Start Guide
Part Descriptions
The Monster Rockin' Roller 2 unit features the following parts:
- 1. Handle
- 2. Ruggedized Housing
- 3. Telescoping Roller Handle
- 4. Battery level indication
- 5. Power on/Power off key
- 6. Charging Port
- 7. AC Outlets
- 8. In-Line Wheels
- 9. USB Ports
- 10. LED Interface
- 11. Source Select button
- 12. BT pairing key
- 13. LED lights on/off key
- 14. LED Lights
- 15. Radio Preset buttons
- 16. AUX Input jack
- 17. Volume Knob
Getting Started
Power Connection
Connect the supplied A/C cable to the speaker and plug the A/C cord into the wall outlet.
Power On/Off Switch
To power on, activate the mechanical Power Switch. The Power Green LED will turn on. The unit will enter Bluetooth mode, indicated by the Bluetooth LED flashing blue. If a 3.5mm Stereo Audio cable is plugged in during this mode, it will automatically enter AUX mode.
Charging Battery
Connecting AC power will begin charging the battery. A flashing Red LED indicator signifies low battery levels requiring charging. When all Green LED indicators are lit, the battery is fully charged. It is recommended to charge the battery for approximately 6 hours before the first use.
Bluetooth Connection (Bluetooth Device)
Manual Bluetooth Pairing
Place the speaker and your Bluetooth device no more than 3 feet apart. Press and hold the Bluetooth pairing button on the speaker for 2 seconds to enter pairing mode; the BT Blue LED will flash. Ensure Bluetooth is enabled on your device and set it to search for Bluetooth devices. The unit will be recognized by its Bluetooth name 'Monster Rockin' Roller'. Once selected, your Bluetooth device will indicate 'Connected', and you will hear a confirmation sound. The Bluetooth LED will turn solid upon successful pairing.
Bluetooth, NFC Pairing
To initiate Bluetooth pairing, turn the speaker on and press and hold the Bluetooth pairing button. Ensure Bluetooth is enabled on your NFC-compatible mobile device. Tap your mobile device onto the NFC logo of the speaker. The Bluetooth Blue LED Indicator will turn solid upon successful pairing.
Connection Using Aux Input
Plug a 3.5mm Stereo Audio wire into the Aux-In input. The unit will enter Aux mode, and the BT Blue LED Indicator will turn off. Any audio device with a 3.5mm audio output jack can be connected. Playback functions (Play, Pause, Next, Previous, Volume Up & Volume Down) can be controlled from the connected audio device.
FM/USB Charging
Listening to FM Radio
Press the "Source" button to select FM source; the radio station frequency will be displayed. Press and hold the seek buttons (or) to automatically search for the station with the strongest reception. To store favorite stations manually, tune to the desired station, then press and hold a number key (1-6) to enter programming mode. The corresponding number will blink on the screen, allowing you to save the station. Repeat this process to store additional stations. To listen to a stored station, press the "Source" button to select FM, then press the number key (1-6) corresponding to your desired preset.
USB Charging
Utilize the built-in USB power bank by connecting your USB cable to one of the two USB power ports. This allows charging for devices like iPhones, iPads, or Android devices (USB cable not included).
EQ Presets
When in Bluetooth or AUX mode, you can easily customize your listening experience by pressing the preset buttons. Available EQ Presets include: FLAT, JAZZ, ROCK, POP, CLASSICAL, and DEFAULT.
Auto Standby/Wake Up
Auto Standby
The Power Red LED Signal will turn on, and other LED Signals will turn off when the main unit enters Standby mode.
- Bluetooth: If there is no BT Connection, a BT Connection failure, or if the BT has been disconnected for 15 minutes, the unit will go to standby mode, and the BT LED Signal will turn off.
- AUX: The unit will enter standby mode if it is in AUX mode and no AUX cable has been detected.
- Work Mode: While in work mode, pressing and holding the volume knob for 3 seconds will automatically enter the unit into Standby Mode.
"Wake Up" from standby mode
If the main unit is in Standby mode, press and hold the volume knob for 1 second. The unit will turn on and return to the latest source mode. The Power Red LED Signal will turn off, and the LED Screen will display the latest source once the unit is in work mode.
Troubleshooting
General
No Power
- Check that the AC power cord is securely inserted in the unit and the electrical outlet.
- Check the Power On/Off switch is in the 'On' position.
- If the battery is flat, plug in the AC power cord to charge and operate.
Keys No Response
- Turn the Power On/Off switch to 'Off', and then 'On' again to reset the unit.
- Unplug the AC power cord and plug it back in.
No Sound Heard
- Make sure the Aux connected device volume is turned to a reasonable level.
- Make sure the Bluetooth connected device is outputting audio via Bluetooth.
- Make sure the Bluetooth connected device volume is turned to a reasonable level.
Bluetooth Operations
Audio Quality is Poor
- Bluetooth reception may be poor. Move the Bluetooth device closer to the speaker.
Cannot Pair to Bluetooth Device
- Ensure both the Bluetooth device and speaker are not connected to any other Bluetooth devices.
- Make sure the Bluetooth On/Off switch located below the speaker is slid to the 'On' position.
- Ensure the Blue LED on the speaker is flashing rapidly (indicating Pairing mode).
- Turn the power switch to 'Off', then 'On' again. Press and hold the BT button for 2 seconds to enter pairing mode.
Specifications
General
| Feature | Specification |
|---|---|
| Input Source | Bluetooth / FM / Aux |
| Bluetooth Range | 10m (33ft) |
| AUX IN | 3.5 mm |
| Control Buttons | Power, Source, Bluetooth pairing, Volume knob, Previous/Next, LED lighting on/off key, 6 pcs FM preset key, Battery Level indicated LED on/off key |
| LED Indicator | Power/Standby (Red LED x1); Bluetooth (Blue LED x1); Battery level indicating LED (Red x1, Green LED x3); LED lighting (White LED x2) |
| Battery | Yes |
| Power Input | AC IN 120V/60Hz / AC IN 220V/50Hz |
| Auto Standby | Enters standby mode after 15 minutes of inactivity |
| Auto Power Off | Yes |
| Speaker Output Wattage | 80W X1 |
| Speaker Driver Size | 8" (Woofer) + 3" (Full Range) |
| Speaker Grill Finishing | Metal speaker grill |
Dimensions & Weight
| Feature | Specification |
|---|---|
| Full Range | Yes |
| Max SPL | 99dB |
| THD + Noise | <10% |
| S/N | >75dB |
| Cabinet Material | Plastic |
| Dimension (W x H x D) | 16.7" x 20.6" x 9.05" |
| Weight (Kg) | 21lbs |
Operating Conditions
| Feature | Specification |
|---|---|
| Operating Temperature | 32°F to 104°F |
| Operating Humidity Range | 40~90% RH |
| Storage Temperature Range | -13°F to 158°F |
Key Functions
| Key | Function |
|---|---|
| Power On/Off Key | Power on: Switch "Power" key to "I"; Power off: Switch "Power" key to "O" |
| Source Key | Press source key to change source between "BT", "Aux In", or "FM" |
| Volume Knob | 1. Rotate VOLUME knob to increase/decrease volume; 2. Press and hold the volume knob key for 3s to enter standby status |
| Bluetooth Pairing | 1. Press and hold the Pairing key for 2s to enter pairing mode. 2. Press and hold the pairing key for 8s to clear any previous Bluetooth pairing. |
| Previous/Next Key | Auto search radio stations when in FM mode; press and hold "Previous/Next" key in FM Source. |
| Preset 1,2,3,4,5,6 | Short press - play preset station; Long press - store current station to preset. |
| Battery Level Indicated LED On/Off key | Press |
Bluetooth
| Feature | Specification |
|---|---|
| Bluetooth Version | 3.0 + EDR |
| Bluetooth Profile | A2DP, AVRCP |
| Bluetooth Frequency Band | 2.4GHz ~ 2.48GHz |
| Bluetooth Range | 10m (33ft.) |
Connections
| Connection Type | Details |
|---|---|
| 3.5mm Aux In | Yes |
| USB Port | USB x 2 (5v 1.2A each) |
| AC in | Yes |
| AC Out | Yes x 2 (Passthrough) |
Limited Warranty
This Monster-branded product, marketed as new, in the original carton to the original purchaser ("Product"), is warranted by Russell Distribution Company, LLC against manufacturing defects in materials and workmanship for a limited warranty period of Ninety (90) Days for Labor and One (1) year for Parts. This Limited Warranty is conditioned upon proper use of Product by you, the Purchaser.
This Limited Warranty does not apply to store display products and product sold as a 'marked down' special, in 'as is' condition, 'close outs', 'liquidation and clearance sales', 'open box', products missing accessories, or no fault found.
Proof of purchase in the form of a Bill of Sale, Receipt or Receipted Invoice is evidence the Product is within the limited warranty period. The Bill of Sale, Receipt or Receipted Invoice must be presented as a pre-condition to obtaining the limited warranty service.
This limited warranty begins on the original date of purchase and is valid only on Products purchased through authorized dealers and used in the United States, and Puerto Rico, by the original Purchaser. To receive warranty service, the Purchaser must first contact Russell Distribution Company, LLC for problem determination and service procedures. The original dated bill of sale, receipt or receipted invoice must be presented upon request as proof of purchase.
Russell Distribution Company, LLC will repair or replace the product at no charge with the same or similar product. Replacement parts and products assume the remaining original limited warranty, or ninety (90) days, whichever is longer. Product freight must be prepaid by the original Purchaser and shipped in either its original packaging or packaging affording an equal degree of protection. Russell Distribution Company, LLC will not be responsible for or obligated to replace damaged Products.
If the Product is received damaged, it is the consumer's responsibility to file a claim against the carrier. Russell Distribution Company, LLC will only store the damaged Product for 30 days and reserves the right to dispose of or ship it back at the consumer's expense after 30 days.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use. It does not apply to damage occurring in shipment, delivery, installation, or uses for which the product was not intended. It also excludes damage from altered serial numbers, cosmetic damage, accidents, abuse, neglect, fire, water, lightning, acts of nature, use of unauthorized accessories or repairs, incorrect electrical line voltage, fluctuations, surges, customer adjustments, failure to follow operating instructions, cleaning, maintenance, environmental instructions, reception problems, distortion, noise, echo, interference, or burned-in images. Uninterrupted or error-free operation is not warranted.
THERE ARE NO EXPRESS OR IMPLIED WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON RUSSELL DISTRIBUTION COMPANY, LLC. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER. RUSSELL DISTRIBUTION COMPANY, LLC SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED FOR THE DURATION OF THIS LIMITED WARRANTY. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Any provision contained herein which is found contrary to state or local laws shall be deemed null and void and the remaining provisions shall continue in full force and effect.
To obtain warranty service, please call: 800-976-0677
