Ale-Hop LED Wireless Headset

Product Specifications

• Rated power: 25mW
• Voltage: 3.7V
• Speaker: Ø40mm
• Frequency: 20Hz-20KHz
• Wireless version: 5.3
• Distance range: 15 metres
• Battery capacity: 400mAh
• Charging time: 2-3 hours
• Use time: 7-8 hours
• Function: Wireless connection, Phone calls, Siri

Product Review

1. Case
2. Earmuffs
3. TF card port
4. Play / Pause, Answer / Hang up a call, Turn ON/OFF the lights
5. ON/OFF, BT or FM mode
6. Charging port
7. Previous song, Volume +
8. Next song, Volume -
9. Microphone
10. LED Indicator light
11. Aux-in port
12. LED light

Charging the Device

Please fully charge the earphones before the first use to ensure the battery is in good condition. Plug the charging cable into the charging port of the headphones and the other end (USB) into a power source. The charging indicator light will light up in red. Once the earphones are fully charged, the charging light will turn off.

Wireless Connection

1. Long press the button to ON/OFF the headset.
2. Open your wireless settings on your device and search for "Ale-Hop 9566323" to connect. The audio will emit a sound, indicating successful connection.

Button Operation

Waste Treatment

Information on the disposal for Waste Electrical & Electronic Equipment (WEEE). This symbol on the products and accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper disposal for treatment, recovery, and recycling, please take these products to designated collection points where they will be accepted on a free of charge basis. In some countries you may be able to return your products to your local retailer upon the purchase of a new product. Disposing of this product correctly will help you save valuable resources and prevent any possible effects on human health and the environment, which could otherwise arise from inappropriate waste handling, please contact your local authority for further details of your nearest collection point for WEEE.

Warnings

1. Read all the instructions before using the product.
2. About the use of wireless environment: wireless signal transmission is affected by surrounding environment such as metal, trees, human body, and other obstacles will have a certain absorption of the signal. Thus, in the actual application of the transmission distance will have a certain impact.
3. It is forbidden to charge the battery under fire and heat conditions. Do not use this product near heat sources such as fire or heaters. Do not expose the headset to extreme heat, such as direct sunlight or inside a car on a hot day. Failure to do so will reduce battery performance or shorten battery life.
4. When not in use for a long time, please charge the battery to more than 50%, and then store it safely.
5. Storage products should be stored in an indoor warehouse with an environment of 25 degrees and a humidity of not more than 75% to minimize the capacity attenuation of the cells.
6. Transportation: the product should be protected from rain and water immersion during transportation and prevent it from being stacked in a high temperature environment for a long time.

Box Content

• 1x Wireless headset
• 1x Charging cable
• 1x 3.5mm audio cable
• 1x Instruction manual