Manufacturer
| Name | LEXIN ELECTRONICS INC |
| Address | 3303 Harbor Blvd Suite E6, Costa, Mesa, CA 92626, USA |
| Contact Name & Title | Jacky Hong |
| jacky@lexinmotorcycle.com | |
| Phone number | 9499818132 |
Product Description
| Trademark/Trade Name | LEXIN, LEXINMOTO, LEXIN ELECTRONICS DESIGN FOR BIKE |
| Model Number | B4FM, LX-B4FM |
| Product Description | MOTORCYCLE BLUETOOTH INTERCOM |
Notified Body
| Certificate issued by | Notified Body 1177, TIMCO Engineering, Inc. |
| Certificate number | E1177-210700 |
| Name and Signature | Bruno Clavier |
| Date | July 5, 2021 |
The device shall be marked as follows: CE
Based on the evidence presented in the Technical Documentation, TIMCO Engineering, Inc., as appointed Notified Body, has issued this EU-Type Examination Certificate in accordance with Annex III Module B. The product described appears to be in conformity with the essential requirements Article 3.1(a), 3.1(b), and 3.2 of RED 2014/53/EU. This certificate relates only to the documents as provided to Timco Engineering, Inc. and is valid up to (1) the date of cessation of presumption of conformity of any of the superseded standards which were used for testing this product and assessed by Notified Body or (2) the date of modifications to the approved type that may affect the conformity of the apparatus with the essential requirements of this Directive or the conditions for validity of that certificate, whichever comes first.
TIMCO ENGINEERING, INC.
P.O. BOX 370
NEWBERRY, FL 32669
www.timcoengr.com
This Certificate is issued under the provision that TIMCO Engineering Inc. nor its subsidiary companies accept any liability concerning the contents of this document other than forced by law. Reproduction of the Certificate (with Annex) in full is allowed. Reproduction of parts of this certificate may only be allowed by written permission of TIMCO Engineering, Inc.
Product Specifications
| Intended Use / Category | Bluetooth |
| RF output power | 0.92dBm (EIRP) |
| Frequency range (MHz) | 2402-2480 |
| Modulation | GFSK |
| Antenna type | Integral Antenna |
| Intended Use / Category | FM Receiver |
| Frequency range (MHz) | 87.5-108 |
| Modulation | FM |
| Antenna type | Integral Antenna |
Essential Requirements
According to the Technical Documentation compiled by the Manufacturer, the following standards were used:
| Essential Requirement | Standard Number & Version |
|---|---|
| Radio (Article 3.2) | ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 303 345-1 V1.1.1 (2019-06) Draft ETSI EN 303 345-3 V1.1.0 (2019-11) |
| EMC (Article 3.1b) | ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-17 V3.2.4 (2020-09) EN 55032:2015/A11 :2020 EN IEC 61000-3-2:2019 EN 61000-3-3:2013/A11 :2019 EN 55035 :2017/A11 :2020 |
| Health (Article 3.1a) | EN 62479:2010 EN 50663:2017 |
| Safety (Article 3.1a) | EN 62368-1:2014+A11:2017 EN 50332-2:2013 |
Technical Documentation
| Item | Exhibit Description | Status |
|---|---|---|
| 1 | Copy of the Declaration of Conformity (Draft acceptable) | ☑ |
| 2 | Agency Letter / Authorization: Letter from Manufacturer/Applicant authorizing the agent and/or representative, if the application is filed by someone other than the Manufacturer. | ☑ |
| 3 | Attestation letter demonstrating compliance with Article 10(2)/Regulations 8 | ☑ |
| 4 | Letter of Attestation and/or exhibits for compliance with Article 10(10)/Regulations 14 (i.e. info to be placed on the packaging with user instructions) | ☑ |
| 5 | Operational Description of the product/device. | ☑ |
| 6 | External Photos of the device | ☑ |
| 7 | Internal Photos of the device | ☑ |
| 8 | RED Annex VI Point 8/RER Schedule 6 Point 8 - Where applicable, a description/or declaration statement about the versions of software or accessories and components affecting compliance with essential requirements. Alternatively, indicate whether the manufacturer intends to allow the end-user to change or modify the hardware and software. | ☑ |
| 9 | User manual and information and installation instructions | ☑ |
| 10 | Conceptual design and manufacturing drawings, and schemes of components, sub-assemblies, circuits, and other relevant similar elements (i.e. Schematics) | ☑ |
| 11 | Block Diagrams | ☑ |
| 12 | Descriptions and explanations necessary for the understanding of those drawings and schemes and the operation of the radio equipment (i.e. a Circuit Description where applicable) | ☑ |
| 13 | RED Annex III module B/RER Schedule 3 module B - Analysis and assessment of the risk(s) (See TGN 30 for guidance) | ☑ |
| 14 | Modification/Standard Update/Applicant or Manufacturer info change letter explaining the changes to the existing version of the product along with supporting exhibits (e.g., photos, schematics, new applicant details, etc.) Applicable for Product Modifications, Applicant Name Change, Add Model, and Standard Update. | ☑ |
| 15 | Copy of the EU/UK-type examination certificate and annexes as delivered by other notified bodies involved in the conformity assessment (e.g., original certificates in case of product modifications, modules certificates, etc.) Where applicable. | ☐ |
| 16 | Test Reports | ☑ |
Test Reports Summary
| Radio / EMC / Health / Safety | Test Report Number | Issue Date/ Rev. No |
|---|---|---|
| EMC | AGC11775210105EE01 | May 20, 2021 / V1.0 |
| EMC | AGC11775210105EE02 | May 20, 2021 / V1.0 |
| Health | AGC11775210105EH02 | May 20, 2021 / V1.0 |
| Radio | AGC11775210105EE04 | May 20, 2021 / V1.0 |
| Radio | AGC11775210105EE14 | May 20, 2021 / V1.0 |
| Safety | AGC11775210105ES01 | Jun. 03, 2021 / V1.0 |
| Safety | AGC11775210105ES02 | Jun. 03, 2021 / V1.0 |
