Kogan KAWNDBIDETB Smart Wash & Dry Electric Bidet Toilet Seat

Safety & Warnings

Please read all instructions before use and retain this user guide for future reference. Read all following safety precautions carefully before use. All images within this user guide are for reference only; refer to the actual product.

Symbols on the product and in this user guide:

• [WARNING]: Failure to follow instructions with this symbol may result in serious injury or death.
• [Caution]: Failure to follow instructions with this symbol may result in injury and property loss / damage.
• [Forbidden]: Statements with this symbol are forbidding an action as described.
• [Alert]: Statements with this symbol are alerting the user to an enforced, compulsory action.

WARNING:

• Do not touch the electrical outlet with wet hands, as it may cause electric shock.
• Do not pour water, hot water, or detergent on the top of the toilet or electrical outlet, as it may cause fire, electric shock, heat, or short circuit. It may also cause injury and indoor water seepage due to product damage.
• Never attempt to disassemble, repair, or alter the product yourself, as it may cause fire, electric shock, heat, or short circuit.
• Do not install the toilet in a car, ship, or any other moving object, as it may cause fire, electric shock, short circuit, or fault. The ceramic, seat, and main part may be damaged from falling due to motion.
• If the product is not working, stop using it immediately.
• Under the following conditions, immediately disconnect the power supply and turn off the water angle valve:
  • Water leakage from pipe or inside of the product
  • Crack or damage on the product
  • Unusual sound or smell
  • Smoke
  • Unusual heating
  • Block
  • Fall out of the cushion
• Continued use of the product, by ignoring the above faults, may result in fire, electric shock, heat, short circuit, injury, and indoor water seepage.
• Do not use any type of water except tap water or drinkable well water (underground water). Do not use seawater. Use of other waters may cause skin inflammation or fault.
• Do not touch the electrical plug during thunder, as it may cause electric shock.
• Do not let the water inlet soft pipe connect to the electrical plug and outlet, as it may cause fire, electric shock, heat, short circuit due to moisture condensation.
• Do not destroy or damage the power cable or plug.
• Do not damage, strike, yank, twist, excessively bend, bind, pinch, or in any way alter the electrical cords. Do not place anything heavy on the cords. Failure to follow this instruction may cause fire, electric shock, heat, and short circuiting.
• Do not use a loose or faulty electrical outlet, as it may cause fire or short circuit.
• Do not use any power supply other than AC 220V, 50Hz.
• Do not place fingers or anything else into the warm air outlet, and do not place objects or clothes on the air outlet or cover it. Failure to follow this may cause scalding, electric shock, or fire damage to accessories.
• Keep open flames (matches, cigarettes, etc.) away from the product at all times, as it may cause fire.
• The toilet seat will only function when the seating sensor on the seat ring detects that there is a person seated (you will hear a beep sound when seated).

Caution:

• Pay attention to low temperature scalding.
• Improper use of the seat warmer may cause low temperature scalding. If sitting for a long time, turn the temp setting to "off".
• Turn the seat temp setting to "off", and warm air-dry temp to "low", under the following conditions:
  • Being used by children, older people, or people who cannot adjust the temperature settings.
  • People with disabilities who may be unable to adjust the temperature settings.
  • People who have taken medicine causing drowsiness (cold medication, sleeping pills, etc.), under the effects of alcohol, or are otherwise inebriated.
• As this is an electrical product, do not install it in a location where it can easily get wet. If installed in a bathroom, please also install a ventilator to maintain bathroom ventilation. Failure to do so may cause fire or electric shock.
• Do not install close to a bathtub.
• Ensure the product is connected to cold water supply, or it may cause body burn or machine fault.
• The product must be connected to the ground correctly. If not connected to the ground, it may cause electric shock. Only use with the supplied 3-prong (grounded) electrical plug.
• Use only an electrical outlet with a leakage switch (rated induced currents below 15mA) or insulating transformer (1.5kVA~3kVA) to protect the outlet loop. Failure to do so may cause fire or electric shock.
• Ensure the plug is firmly inserted into the wall outlet at all times, or it may cause fire, heat, or short circuit.
• When removing the plug from the wall outlet, remove by holding the plug. Do not pull on the cord.
• If the power soft wire is broken, cease use immediately and contact Kogan.com for replacement or repair.
• Turn off the power before doing any general maintenance or spot checks. Nozzle cleaning will require power to check.
• People in need of supervision or a guardian (people with disability, children, older people) must not be left unattended with the device.
• Do not let children play with this product.
• Do not throw lit cigarettes, matches, or any other flaming material into the toilet.

General safety notices:

• Do not use the product when it is loosely fitted. The toilet and seat may separate and fall off, causing body injury.
• If damaged, do not touch the broken area. Cease use and contact Kogan.com for assistance.
• Do not impact forcefully, put heavy weight upon, crouch on, or stand on the product. This may cause product damage, personal injury, or indoor water seepage.
• Do not use the seat for anything other than what it was designed for. Do not pull the product by holding the seat or cover, and do not attempt to sit on it while it is not in position. Failure to do so may result in product damage or injury.
• Use kitchen detergent (neutral) to clean the plastic parts (seat cover, etc.) and water inlet soft hose. Do not use the following materials: bathroom detergent, house detergent, petrol, banana oil, cleaning powder, nylon brushes, etc. These products may damage the plastic parts, cause cracks, or may cause water leakage due to damaged soft hose.
• To avoid sudden water leakage, do not remove the water inlet filter when the angle valve is open. Refer to the Cleaning & Care section of this user guide.
• Do not crush or bend the water inlet hose, as it may cause water leakage.
• If replacing another bidet, use the new hose supplied with this product. Do not reuse the previous hose, as it may cause water leakage.
• Do not pour hot water into the toilet, as it may cause body injury or indoor water seepage due to toilet damage.
• Do not flush with a large amount of toilet paper or other subjects except sewage and a small amount of toilet paper, as it may cause toilet damage. Do not flush tampons, condoms, or sanitary products.
• Do not lean on the toilet cover while using, it may damage the seat cover.
• Close the angle valve when water is leaking.
• When room temperature is below 0°C, to avoid piping or soft hose damage, anti-freezing measures should be adopted. If the water inlet soft hose is frozen, it may destroy the main body or piping, leading to water leakage. To avoid damage, please pay attention to room temperature adjustment.
• When not in use for an extended period, drain the inlet soft hose and disconnect from power. When next using, open the angle valve and let water connect first, or it may cause skin inflammation due to poor water quality. It may cause fire or overheating if the power supply is always connected.
• Confirm that the filter is screwed to the correct position installed, prior to using. It may cause water leakage if not screwed tight.
• When the toilet drain outlet is blocked, cut off the power then clean the obstruction, otherwise sewage may overflow, causing indoor water seepage because of the auto flush function.
• Flush the toilet after each use. Failure to do so may result in difficulty cleaning the toilet, blocked drain outlet, or sewage overflow, resulting in indoor water seepage.
• After each use, if there is any mess on the floor, always clean immediately to prevent corrosion or unhygienic build-up.
• Extended heating without sufficient water supply will lead to the heater becoming burned.

Dimensions

The bidet toilet seat has the following approximate dimensions:

• Top View: Width 445mm, Depth 381mm.
• Side View: Height 508mm, Depth 160mm.
• Bottom View: Width 364mm, Depth 281mm, Seat opening width 195mm.

Diagrams showing these measurements are provided in the original document.

Components

Ensure you have all of the components listed below before disposing of any packaging:

• Bidet: The main electric bidet toilet seat unit.
• User guide: This document.
• Spare front nozzle: An additional nozzle for the front wash function.
• Spare rear nozzle: An additional nozzle for the rear wash function.
• PE inlet pipe: The hose for connecting water supply.
• Rubber gasket: A sealing component.
• Spanner: A tool for tightening connections.
• T-valve with filter: A valve to connect the water supply and includes a filter.
• Mounting bolts (x2): Fasteners for securing the seat.
• Rubber sleeves (x2): Bushings for the mounting bolts.
• Metal gasket (x2): Washers for the mounting bolts.
• Seat bracket: The component that attaches the seat to the toilet bowl.

Overview

The Kogan Smart Wash & Dry Electric Bidet Toilet Seat includes the following parts:

• Seat lid
• Damper
• Control panel: Located on the side of the seat for operation.
• Seat
• Cushion
• Deodorizing box (inside)
• Dryer: For warm air drying.
• Rear wash: Nozzle for rear cleansing.
• Front wash: Nozzle for front cleansing.

Note: Ensure the screen protector is removed prior to first use.

Installation

Precautions before Installation

• Before installation, ensure the toilet, wall, floor tiles, and ceramic toilet have all been installed. Your bathroom should have a water supply and power socket nearby the toilet.
• Water pressure should be between 0.06Mpa (flow) - 0.75MPa (Static) and water temperature between 5°C - 35°C.
• In case of transportation in subzero (freezing) conditions, place the product in a warm place and wait for any residual water to thaw before installing.
• Connect to the daily-use water pipe only. Use tap water or drinkable well water only. Do not connect to recycled water or industrial water supplies, due to possible contamination, as this would cause jamming or internal damage.
• Be sure to use the T-valve and filter.
• Ensure the water supply is fully connected before connecting the bidet to the power outlet.

1. Installing T-valve with filter

• Close the inlet valve and remove the water pipe (as shown in Figure 1).
• Connect the T-valve with filter to the inlet valve (as shown in Figure 2).
• Connect the flush tank to the T-valve using the water pipe (as shown in Figure 3).

Diagrams illustrate these steps: Figure 1 shows water pipes and a valve. Figure 2 shows the T-valve with filter and gasket connected to a valve. Figure 3 shows the flush tank connected to the T-valve.

2. Bidet Installation

Remove original toilet seat:

• Loosen bolts with the spanner.
• Remove the nut and gasket.
• Remove the toilet seat.

A diagram shows the original toilet seat being removed, indicating bolts, gasket, and nuts.

Installing the seat bracket:

• Before installation, place the product on the toilet bowl to check for correct fitment.
• Embed and install the rubber sleeve, seat bracket, and metal gaskets as shown in the diagram.
• Insert the mounting bolts and tighten them so that the seat bracket cannot move.
• If the product does not match the toilet bowl ideally, loosen the mounting bolts, remove the metal gaskets, readjust the position of the seat bracket, then replace the metal gaskets and tighten the bolts.

A diagram illustrates the installation of the seat bracket with screws, mounting bolts, metal gaskets, and rubber sleeves.

Installing the bidet:

• Aim the bottom card slot of the seat to the edge of the seat bracket, slide in gently. You will hear a "click" sound when it is correctly placed.
• Ensure the bidet fits into the area before placing, then lift the bidet to fit it in the correct position.
• Ensure the installation is correct before use. Long-term uneven force will lead to cracking of the seat ring.

Note: Do not forget to allow space for the power cable between the toilet and bidet.

A diagram shows hands guiding the bidet onto the seat bracket.

3. Connecting the Inlet Pipe

• Connect T-valve: Hold the PE inlet and connect it to the T-valve.
• Connect bidet: Hold the PE inlet and connect it to the bidet.
• Turn on the inlet valve after connecting to check the connectors for signs of leakage.

A diagram illustrates the connection of the T-valve to the toilet tank, inlet valve, and PE inlet.

Operation

Preparation

1. Ensure the plug is inserted into the power socket, then press the reset button on the residual current device (RCD). The indicator turns from black to slightly red.
2. Open the water-inlet valve.
3. Confirm the power icon LED is on.
4. If the power light on the product indicator panel is not lit, all functions will be unavailable. Press the power button on the operation button panel to activate.

Sit on the seat

1. Seat sensor responds.
2. Nozzle cleaning indicator turns on.
3. If the automatic deodorisation function is turned on, the deodorisation will begin to work.
4. The toilet seat will only function when the seating sensor on the seat ring detects that there is a person seated (you will hear a beep sound when seated).

Control panel

The control panel features several buttons for operation:

Indicators

• Power: Active when the bidet is powered on. Flashing during a malfunction.
• Seat Temperature: Active when the seat is heating. Flashing if the seat is over heated.
• Water Temperature: Active when the water is heating. Flashing if the water is over heated. Flashing when water level is low.
• Clean: Active when a user is seated.
• Energy Saver: Active when the bidet enters energy saving mode.

Note: Idle mode means rear wash, front wash, dryer, flush, etc., are not enabled. Child wash, one solution, strong wash, lady care must be enabled in idle mode.

Cleaning & Care

Toilet bowl cleaning

• Ensure the power is switched off at the power outlet and the plug is removed prior to cleaning.
• Use a damp, soft cloth to wipe the toilet shelf and seat. Dirt should be cleaned as soon as possible. If it's difficult to clean, you can use a mild detergent.

Nozzle cleaning

• Power needs to be connected for Nozzle cleaning.
• Press the "Clean" button and water sprays out.
• Press the button a second time, the rear nozzle extends.
• Press the button again, and the front nozzle extends too.
• Clean the nozzles using a brush.

A diagram shows a brush cleaning the nozzle.

Replacing the nozzle tip

• With the nozzle extended, hold the front of the nozzle tip and turn it counter-clockwise to remove the old nozzle tip.
• To replace the tip, insert it into the nozzle and turn it clockwise.
• Be careful not to force the nozzle tip or bend it.

Diagrams show the process of removing and replacing the nozzle tip.

Cleaning the filter

When the water pressure becomes low or insufficient, the filter will need to be cleaned.

1. Close the water inlet valve to stop the water supply. Note: Do not remove the filter without closing the valve. Otherwise, water will spray out.
2. Remove the T-valve filter: Unscrew the connector using a spanner and then remove the filter. Refer to the images below.

Diagrams show the steps for removing the filter.

3. Clean the filter: Remove the filter and clean it thoroughly. Rinse off dirt or clean the filter with a toothbrush.

   Note: Do not use any cleaning agents. Clean it with water only. Do not use excessive force when cleaning, otherwise the filter will be deformed or damaged, affecting normal use.

4. Reattach the filter: Reinstall the filter by following the removal steps in reverse order until complete. Note: Open the water inlet valve after installation and confirm there's no water leakage.

Extended periods without use

• If the bidet is not being used for an extended period of time, turn off the inlet valve and power supply.
• Do not turn off the inlet valve and power if the room temperature will be lower than 0°C; your bidet will enter the anti-freeze program automatically.

Specifications

Troubleshooting

Buzzer

• Buzz once: Received instruction from controller.
• Buzz twice: Auto operation when the user stands up.
• Buzz three times or more: Indication of malfunction.

Notes

This section is for user notes.