Gazebo Installation Product Manual

Important Safety Instructions

Warning! To reduce the risk of serious injury, read the following safety instructions before assembling and using the gazebo. Please check with your local governing authority/local municipal codes regarding installation of structures before assembly.

Caution! Proper placement of your gazebo is essential.

• Do not place the product underneath electrical lines.
• Keep children away during assembly.
• This product contains small parts which can be swallowed by children.
• Keep fingers away from the places where they can be pinched or trapped.
• Do not attempt to assemble the gazebo if any parts are missing.

• This product is intended for domestic outdoor use only.
• The product should be placed on flat, horizontal ground.
• Ensure enough clearance around the product. Before assembling the product, find level ground not less than 6' (1.8 m) away from any structures or obstructions, such as fences, garages, houses, overhanging branches, laundry lines, or electrical wires.
• This gazebo is not to be regarded as part of a building/house structure. The gazebo is to be anchored onto the ground for added safety. Do not assemble the gazebo onto soil/earth ground. It is best advisable to have the gazebo built onto a wooden deck or concrete ground for stability. If it is to be built onto a wooden deck/ground, do ensure that the wooden deck/ground has a strong foundation.
• It is advisable to use appropriate floor plugs (not provided) to anchor the gazebo onto the wooden/concrete ground.
• Some structures may require two or more people to install safely. Check for underground utilities before digging or driving stakes into the ground.
• During installation, follow all safety warnings provided with your tools, and use safety glasses.
• In case you set up more than one gazebo, keep a minimum distance of 10' (3 m) between the gazebos.
• Any assembly or maintenance of the product must be carried out by adults only.

Pre-assembly

Tools That May Be Required (Not included in boxes)

NOTE: Tools / equipment are not shown to actual size and scale.

Level, Rubber Mallet, Phillips Screw, Drill, Allen Key, Allen Key

Equipment Required (Not included in boxes)

NOTE: Equipment are not shown to actual size and scale.

Safety Hat, Gloves, Safety Goggles, Stepladder

Matters Needing Attention

1. Two or more people are required for assembly. [2+]
2. Do not fully tighten screws prior to complete assembly.

Parts Identification

Screws and Fasteners

Structural Components

Assembly Instructions

Step 1

Attach A1 and A2 to B1 using H3x4, H8x4, H8x2, H5, and H6 screws. Ensure C is correctly positioned.

Diagram shows attachment of A1 and A2 to B1, with C piece connecting them. Specific screw types and quantities are indicated.

Step 2

Attach A3 and A4 to B2 using H3x4, H8x4, H8x2, H5, and H6 screws. Ensure C pieces are correctly positioned.

Diagram shows attachment of A3 and A4 to B2, with C pieces connecting them. Specific screw types and quantities are indicated.

Step 3

Connect the assembled A1/A2/B1 structure to the A3/A4/B2 structure using D pieces and H8x3, H3x3 screws.

Diagram shows the two main frame sections being joined by D pieces.

Step 4

Connect the assembled frame sections using E pieces and H8x3, H3x3 screws.

Diagram shows the frame being further stabilized with E pieces.

Step 5

Attach F pieces to the frame using H5 screws.

Diagram illustrates the placement of F pieces and their attachment with H5 screws.

Step 6

Attach G1 and G2 pieces to the frame using H5 screws. Ensure correct orientation as shown in the diagram.

Diagram shows G1 and G2 pieces being attached to the structure, with close-ups indicating the method of attachment using H5 screws.

Step 7

Install the roof panels P1 and P2 using H2x12, H7x12, H9x12, and H5 screws. Ensure they are aligned correctly.

Diagram shows the roof panels being laid out and attached to the frame.

Step 8

Secure the roof panels using J1 pieces and H1 screws.

Diagram shows J1 pieces being used to secure the roof panels with H1 screws.

Step 9

Attach J2 and J3 pieces to the roof structure using H4 screws. Ensure proper alignment.

Diagram illustrates the attachment of J2 and J3 pieces to the roof, with close-ups showing the use of H4 screws.

Step 10

Install K and L pieces to the frame using H1, H4, and H7 screws. Ensure correct placement on the support legs.

Diagram shows K and L pieces being attached to the legs of the gazebo.

Step 11

Attach M pieces to the frame using H4x2 screws. Ensure secure fastening.

Diagram shows the final attachment of M pieces using H4x2 screws.

Step 12

Final check of all connections using HQ and HW3 screws.

Diagram indicates a final tightening or check of the structure.

WARRANTY

WARRANTY CLAIMS

• There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
• Before making a claim, please call to inquire. Provide your purchase order number and details of the problem. Replacement parts will be arranged within 48 hours. If out of stock, a shipping date will be provided.
• The product must be used in accordance with the instructions provided.
• For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.

Type of Warranty Claim

• Failure to follow the furniture instructions will invalidate the warranty.
• Damage during installation is not covered, but damage during transportation is.

Scope of Responsibility

• No responsibility will be borne for misuse or user damage and/or loss of parts during the installation of furniture.
• Damage and scratches after use are not covered by the warranty.

The Warranty Relates to All Bought in The US and Covers The Following Areas

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

RETURNS

CHANGED YOUR MIND AND NEED TO RETURN YOUR ITEM?

PLEASE FOLLOW THE BELOW INSTRUCTIONS:

• If you have purchased and simply changed your mind, follow the retailer's instructions for returns.

DEFECTIVE ITEMS

• If your item is defective in any way, i.e., it doesn't work but you can't identify why, please call us in the first instance.

DAMAGED ITEMS

• If you receive an order with obvious shipping damage from the retailer, refuse the delivery. If the delivery has been accepted and shipping damage is found, please follow the specific instructions advised by the retailer.
• In all circumstances, please save all packaging material and paperwork for the order. Disposing of packaging material or attempting to return the merchandise without contacting the fulfiller may jeopardize your chances of making a claim, and you may not receive credit for the return.

AFTER-SALES CONTACT

✉️ adelahu@fufugaga.com

? 208-820-0068