Tapo Smart Light Strip, Multicolor - Quick Start Guide

Brand: TP-Link

Getting Started

Follow these steps to set up your Tapo Smart Light Strip:

Get the Tapo app from the [App Store] or [Google Play].
Follow the instructions in the Tapo app to complete the setup.
Install the Light Strip according to the diagram.

Note: Install it on a dry, clean, and smooth surface. Do not move it to another place after it is attached.

Installation Diagram

The installation process is illustrated in the following steps:

Step 1: Download the Tapo app from the [App Store] or [Google Play]. This step is represented by app store logos.
Step 2: Follow the instructions within the Tapo app to complete the setup. This step is indicated by a smartphone screen showing app instructions.
Step 3: Install the Light Strip according to the diagram. This shows the physical components: the light strip, a power adapter, and a controller unit. A requirement for a minimum length (≥90°) and an LED indicator are visible.
Step 4: The diagram shows the light strip being applied to a surface, emphasizing proper placement.
Step 5: The final step depicts the installed light strip, now illuminated, and a smartphone displaying the Tapo app interface, indicating successful setup and control.

Safety Information

Please read and follow the safety information below when operating the device:

Keep the device away from water, fire, humidity, or hot environments.
Do not attempt to disassemble, repair, or modify the device. If service is needed, contact TP-Link.
Do not use the device where wireless devices are not allowed.
Use only the recommended chargers.
The adapter shall be installed near the equipment and shall be easily accessible.

TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Use this product with care and operate at your own risk.

Declarations and Restrictions

TP-Link hereby declares that this device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tapo.com/en/support/ce/. Similar declarations for UK compliance are also available.

Important Restrictions:

This product is NOT FOR EMERGENCY LIGHTING.
It is not intended for recessed installation in ceilings or soffits.
Use only the control provided with or specified by these instructions to control this device.
To prevent fire danger, do not run the cord behind walls, ceilings, soffits, or cabinets where it may be inaccessible for examination.
Use only insulated staples or plastic ties to secure cords.
The maximum distance to the receptacle is determined by the length of the adapter cord.

No restrictions exist in the use of radio frequencies or frequency bands in all EU member states, EFTA countries, Northern Ireland, and Great Britain.

Technical Specifications

Operating Frequency: 2400MHz~2483.5MHz

Maximum Output Power: 20dBm

Warranty and Support

For more information about warranty, please visit https://www.tapo.com/en/support/.

For technical support, the user guide, and other information, please visit https://www.tapo.com/support/.

	TP-Link Tapo Smart Light Strip: Quick Start Guide & Installation Get started with your TP-Link Tapo Smart Light Strip. This guide provides quick setup instructions, installation steps, safety information, and compliance details for the multicolor smart light strip.
	Tapo Smart Light Strip, Multicolor - Quick Start Guide \| TP-Link Get started with your TP-Link Tapo Smart Light Strip. This guide provides setup instructions, safety information, technical specifications, and compliance details for the Tapo L920-5 multicolor smart light strip.
	Tapo L530E Smart Wi-Fi Light Bulb, Multicolor - TP-Link Datasheet Datasheet for the TP-Link Tapo L530E Smart Wi-Fi Light Bulb. Features multicolor lighting, dimming, scheduling, voice control with Alexa and Google Assistant, remote app control, Away Mode, energy monitoring, and easy setup. Includes technical specifications and package contents.
	TP-Link Tapo LED Strip Lights Enhance Office Exterior Aesthetics Case study detailing how AQ Group used TP-Link's Tapo LED strip lights to dynamically illuminate their architecturally significant office building, improving brand visibility and reducing lighting costs.
	TP-Link Tapo L430P Smart Light Bulb: Multicolor, Dimmable, Voice Control Explore the features and specifications of the TP-Link Tapo L430P Smart Light Bulb. Offers millions of colors, adjustable white tones, voice control, scheduling, and energy monitoring for smart home lighting.
	TP-Link Tapo L530B Smart Wi-Fi Light Bulb, Multicolor - Datasheet Datasheet for the TP-Link Tapo L530B Smart Wi-Fi Light Bulb. Features include multicolor options, dimming, scheduling, voice control via Alexa and Google Assistant, Away Mode, and energy saving.
	TP-Link Tapo Hub Quick Start Guide - Setup and Usage Learn how to set up and use your TP-Link Tapo Hub with this quick start guide. Discover LED status indicators, button functions, accessory pairing, and safety information for your smart home device.
	TP-Link Tapo H500 Smart HomeBase Quick Start Guide A quick start guide for the TP-Link Tapo H500 Smart HomeBase, covering installation of a hard drive, connecting to a network, setting up the device, and building a smart home ecosystem.