Lefton KS2207 Sink Installation Manual
Overview
This manual provides instructions for the installation of the Lefton KS2207 sink. It covers the setup of the main sink unit, faucet, drain system, and related accessories.
Component Identification
The following components are part of the sink installation:
- Drain control line
- Hose of pull-out faucet
- Water purifier faucet connector (1/4")
- Glass rinser supply line
- Motor cables
- Motor of temp-display
- Supply line of temp-display
- Supply lines (Red for hot water, Blue for cold water)
- Gravity hammer
Drain System Installation
The drain system involves several parts to ensure proper water flow and prevent leaks:
- Drain assembly A, B, C, and D
- Overflow assembly A, B (screw), and C
- Overflow gasket
- Overflow pipe connector
- Drain system gasket
- Bottle trap
- Drain pipe
- Drain system
Ensure all gaskets are properly seated to prevent leaks.
Electrical Connections
The sink may include components with motor cables, such as a temperature display. Ensure these are connected according to the specific requirements of the electrical components.
Water Connections
Connect the hot and cold water supply lines to the appropriate inlets. The water purifier faucet connector should be attached to the designated port.
Final Checks
After installation, check all connections for leaks and ensure all components are functioning correctly.
