Fender Pour Over Env Filter

Product Overview

Thanks for purchasing the Fender Pour Over Env Filter, a unique take on the classic envelope filter effect. The Pour Over features a filter section with Frequency, Q, and Drive controls, along with toggle switches for sweep-up/sweep-down and filter type (low, high, or band-pass). The distortion section has its own dedicated toggle switch, complemented by familiar Gain, Tone, and Level controls.

Designed in California, U.S.A.

Controls and Features

Pedal Layout Description: The top panel of the pedal features several controls and connectors. From left to right, the front panel has a Bypass Footswitch (1) at the bottom left. Above the footswitch are controls labeled Level (4), Tone (5), Distortion Switch (6), Gain (7), and Frequency (8). To the right of these are controls labeled Q (9) and Drive (10). There are two toggle switches: an Up/Down Switch (11) and a Filter Type Switch (12). The pedal also includes an Input Jack (13) on the right side and an Output Jack (3) on the left side. The top panel has LEDs (15) indicating status, a 9V DC INPUT (16) connector, and a Low Battery Indicator (14).

Control Descriptions:

Bypass Footswitch (1): Bypasses the effect.
Jewel Indicator (2): Illuminates when the effect is active.
Output Jack (3): Low-impedance output jack connects to an amplifier or the next effect pedal in the signal chain.
Level (4): Controls the overall distortion output level.
Tone (5): Similar to a guitar's tone control. Turn counter-clockwise to decrease treble frequencies; turn clockwise for full-range tone.
Distortion Switch (6): Turns distortion on and off.
Gain (7): Controls the amount of distortion added to the signal.
Frequency (8): Controls the filter frequency range.
Q (9): Controls the filter resonant peak.
Drive (10): Controls the amount of signal fed into the filter.
Up/Down Switch (11): Controls the frequency sweep direction (up or down).
Filter Type Switch (12): Selects the filter type: Low-pass (LP), High-pass (HP), or Band-pass (BP).
Input Jack (13): High-impedance input suitable for electric guitar, bass, acoustic guitars with pickup systems, keyboards, and other instruments.
Low Battery Indicator (14): Indicates when the battery is low.
LED Kill Switch (15): Deactivates control-knob illumination.
DC Power Connector (16): Standard center-negative 9VDC jack for use with appropriate power supplies.

Important Safety Instructions

⚠️ WARNING: To prevent damage, fire, or shock hazard, do not expose the unit or its AC power to rain or moisture.
Do not alter the AC plug of the connected power adapter.
Do not drip or splash liquids on the unit.
No user-serviceable parts inside; refer servicing to qualified personnel only.
⚠️ WARNING: The unit must only be connected to a safety agency certified, regulated power source (adapter), approved for use and compliant with applicable local and national regulatory safety requirements.
Unplug the AC power adapter before cleaning the unit exterior. Use only a damp cloth for cleaning and then wait until the unit is completely dry before reconnecting it to power.
Amplifiers, loudspeaker systems, and ear/headphones (if equipped) are capable of producing very high sound pressure levels which may cause temporary or permanent hearing damage. Use care when setting and adjusting volume levels during use.

Specifications

IMPEDANCES:	INPUT: 820kΩ OUTPUT: 470Ω
POWER SUPPLY:	9VDC regulated adapter, 5.5 x 2.1 mm barrel connector, center negative
POWER REQUIREMENTS:	75mA @ 9VDC
DIMENSIONS:	3.75" x 4.9" x 2.5" (95.25mm x 124.5mm x 63.5mm)
WEIGHT:	1.2lbs (.54kg)

Product specifications subject to change without notice.

Compliance Marks: CE

RoHS Compliance Information

This table details the presence of hazardous substances in components, according to SJ/T 11364 and GB/T 26572 standards.

Component Name	Lead (Pb)	Mercury (Hg)	Cadmium (Cd)	Hexavalent Chromium (Cr(VI))	Polybrominated Biphenyls (PBB)	Polybrominated Diphenyl Ethers (PBDE)
Enclosure (箱体)	O	O	O	O	O	O
Speaker Unit* (喇叭单元*)	O	O	O	O	O	O
Electronic Parts (电子部分)	X	O	X	O	O	O
Terminals (接线端子)	X	O	O	O	O	O
Wires (电线)	X	O	O	O	O	O
Accessories (附件)	O	O	O	O	O	O

Explanation of Symbols:

O: Indicates that the content of this hazardous substance in all homogeneous materials of this part is below the limit requirement specified in GB/T 26572.
X: Indicates that the content of this hazardous substance in at least one homogeneous material of this part exceeds the limit requirement specified in GB/T 26572.

Note: Due to limitations in global technological development, it is not possible to substitute hazardous substances in components that contain them.

*This applies when the product includes a speaker unit.

Additional Information

Manuals are available in additional languages at: www.fender.com/support

Notes

(Space for user notes)

	Fender MTG Tube Distortion Pedal: Features, Controls, and Specifications Explore the Fender MTG Tube Distortion pedal, a compact unit featuring a genuine 6205 preamp tube, versatile 3-band EQ, Tight control, and a switchable boost. This guide details its functions, specifications, and safety instructions.
	Fender The Pinwheel Rotary Speaker Emulator Pedal - User Guide and Specifications Comprehensive overview of the Fender The Pinwheel Rotary Speaker Emulator pedal, detailing its controls, features, specifications, and safety instructions. Learn how to achieve classic rotary speaker sounds with this versatile effects pedal.
	Fender Full Moon Distortion Guitar Effects Pedal - User Manual Detailed user manual for the Fender Full Moon Distortion guitar effects pedal, covering its features, controls, specifications, safety instructions, and manufacturer information.
	Fender Pugilist Distortion Guitar Pedal: Owner's Manual and Specifications Comprehensive guide to the Fender Pugilist Distortion guitar effects pedal, covering its dual distortion engines, controls, operation, safety instructions, and technical specifications.
	Fender Engager Boost Pedal: User Manual and Specifications Comprehensive user manual for the Fender Engager Boost pedal, detailing its features, controls, specifications, and safety instructions. Learn how to use this versatile boost and EQ pedal for your guitar or bass.
	Fender The Pinwheel Rotary Speaker Emulator Pedal - Features, Specs, and Manual Discover the Fender The Pinwheel Rotary Speaker Emulator pedal. This guide details its controls, modes, specifications, and important safety instructions for achieving authentic rotary speaker sounds on your instrument.
	Fender Marine Layer Reverb Owner's Manual and Specifications User manual for the Fender Marine Layer Reverb digital effects pedal, detailing controls, reverb algorithms, specifications, and safety information. Includes a textual description of the pedal layout.
	Fender FUSE 2.0 Super Champ X2 Owner's Manual A comprehensive guide to using Fender FUSE 2.0 software with the Fender Super Champ X2 amplifier, covering installation, firmware updates, preset editing, effects, advanced settings, and community features.