PXN-P50L Wireless Gaming Controller

01 Product Overview

This section provides an overview of the PXN-P50L Wireless Gaming Controller.

Controller Layout:

• Buttons: A/B/X/Y Buttons, [Home Button], D-pad, Left Joystick, Right Joystick, Screenshot Button, Secondary Function Button, Programming Button M1, Programming Button M2.
• Shoulder Buttons: L Button, ZL Button, R Button, ZR Button.
• Ports: Type-C Charging Port.
• Controls: [Power Switch].
• Indicators: LED indicators display connection and battery status.

Diagram Description: A visual representation of the controller's top and bottom views, clearly labeling each button, joystick, D-pad, shoulder buttons, charging port, and power switch. LED indicators are also shown.

02 System Requirement

Supported Platforms:

• Nintendo SWITCH
• PC
• iPhone

PC System Requirement:

• Windows 7 / 8 / 10 / 11
• iOS 16+

03 Power ON / OFF

• Power ON: Long press the [Power Switch] for 3 seconds to power ON and enter pairing mode.
• Power OFF: Short press the [Power Switch] to reset and power OFF the controller.

04 Mobile APP Function

Enhance your gaming experience by connecting the controller to the PXN Play app.

Download:

• For iOS: Search for "PXN Play" on the App Store.
• For Android: Search for "PXN Play" on Google Play.

After connecting the controller to your SWITCH or PC, use the app to customize its functions:

• Controller Macro function setting and sharing.
• Controller joystick sensitivity adjustment.
• Controller vibration intensity adjustment.
• Controller Turbo function adjustment.
• Additional functions are under development.

05 How to use in SWITCH

Wireless Connection

1. On the SWITCH homepage, navigate to Controller > Change Grip/Order.
2. Long press the [Power Switch] for 3 seconds to enter pairing mode. The four LED indicators on the controller will flash circularly to show remaining battery life and enter connection state.
3. The LED1 indicator on the controller will remain ON after 5 seconds, indicating a successful connection.

To reconnect or wake up the SWITCH console in wireless mode, press the [Home Button] on the controller.

Wired Connection

1. On the SWITCH homepage, go to Setting > Controllers and Sensors > Pro Controller Wired Connection. Ensure this option is set to ON.
2. Connect the controller to the SWITCH console using a Type-C cable and an OTG Adapter.
3. The connection is successful when the LED1 indicator flashes. (Note: OTG adapter is not included)

Diagram Description: Shows a Type-C cable connecting to an OTG adapter, which then connects to the controller. Another diagram shows the controller connected to a SWITCH Dock via USB port.

Connect with SWITCH Dock

1. Ensure the controller is OFF or in Sleep state before wired connection.
2. Use a Type-C cable and OTG Adapter to connect the controller and the SWITCH Dock.
3. The connection is successful when the LED1 indicator flashes.

06 How to use in PC

Wired Connection

1. Connect the controller to a USB port on your PC using the provided USB cable.
2. Your PC will prompt to install new hardware. The connection is successful when the LED2 indicator flashes. The controller operates in X-input mode.

The LED2 indicator remains ON when the controller is fully charged.

Diagram Description: Shows a USB cable connecting the controller to a PC.

Testing Function

Function testing is available when the controller is connected to a computer.

Steps:

1. Open the Control Panel on your PC.
2. Navigate to Devices and Printers.
3. Right-click the Controller icon.
4. Select Game Controller, then Setting, and click Properties Testing.

07 Auxiliary Function

Vibration Adjustment Function

After connecting, press and hold the [Home Button] while simultaneously moving the Left Joystick up or down to adjust the vibration level. The controller remembers the last vibration setting.

• High Vibration: LED1+LED2+LED3 light up.
• Medium Vibration: LED1+LED2 light up.
• Low Vibration: LED1 lights up.
• No Vibration: All LEDs OFF.

Turbo Function

Buttons that can be set for Turbo Function: A, B, X, Y, L, R, ZL, ZR.

• Manual Turbo: After setting, long press the Function Button to activate Turbo manually. The indicator will flash Orange. Press the button again to stop.
• Auto Turbo: After setting, press the Function Button once to activate Turbo automatically. The indicator will flash Orange. Press the button again to stop.
• Clear Turbo Setting: After setting, press the Function Button and Turbo Button. The indicator will stop flashing. This clears the Turbo function for that button.
• Clear all Turbo Setting: Clears all button TURBO functions.

Adjustable Rapid Fire

Long press the [Home Button] and simultaneously move the Right Joystick up or down to adjust the rapid fire rate.

• 5 times/second: LED1 lights up.
• 10 times/second: LED1+LED2 light up.
• 15 times/second: LED1+LED2+LED3 light up.

Macro Function

Action Buttons: Left Joystick (Up/Down/Left/Right), Right Joystick (Up/Down/Left/Right), D-pad (Up/Down/Left/Right), A, B, X, Y, L, R, ZL, ZR, L3, R3, +, - buttons.

Macro Function Setting:

1. Press and hold one of the Programming Buttons (M1 or M2). The white indicator on the button will remain ON, entering programming state.
2. Press the action buttons you wish to program in sequence. Up to 32 action buttons can be programmed per macro.
3. Press the Programming Button again to finish. The white indicator will turn OFF, and the orange indicator will remain ON. If more than 32 buttons are pressed, the program will automatically finish.

Clear Macro Function:

1. Press and hold one of the Programming Buttons (M1 or M2). The white indicator will remain ON.
2. Press the Programming Button (M1 or M2) again to clear the Macro function. The white indicator will turn OFF, and the orange indicator will remain ON.

08 Charging Function

The controller uses a standard USB 5V voltage for charging. You can charge it by connecting to a phone charger, computer, or other USB power sources. A full charge typically takes about 2-3 hours.

09 Sleeping Function

To adjust the auto-sleep time, with the controller in Power OFF state, press and hold [L3 + L], then use the UP/DOWN directions on the D-pad.

• Connection State: 30 seconds without connection.
• First Pairing State: 60 seconds without connection.
• Working State: 5 minutes without any action.

Sleep States and Indicators:

• Sleep after 5 minutes: LED1 lights up.
• Sleep after 10 minutes: LED1+LED2 light up.
• Sleep after 20 minutes: LED1+LED2+LED3 light up.
• Sleep function OFF: LED1+LED2+LED3+LED4 light up.

10 Reset Function

If the controller experiences functional disorders, freezes, or other abnormalities, follow these steps:

1. Short press the [Power Switch] to enter the Power OFF state.
2. Then, long press the [Power Switch] for 6 seconds. The controller will vibrate once, indicating it has entered restore factory settings mode.
3. After restoring, please re-connect and pair the controller.

11 Attention

• Avoid strong vibration; do not disassemble, modify, or repair the controller yourself.
• Prevent water or other liquids from entering the controller to avoid damage.
• Avoid storing the controller in humid, high-temperature, or oily smoke environments.
• The controller contains a built-in battery; do not throw it into fire to avoid explosion.
• Children should be under adult supervision at all times when using this product.
• If you encounter any problems or have suggestions regarding the product, please contact the seller or the after-sales service.

12 Product Specifications