VEVOR

Introduction

VEVOR is committed to providing tools at competitive prices. Phrases like "Save Half" or "Half Price" represent an estimate of potential savings compared to major brands and may not apply to all product categories. Customers are advised to verify savings carefully when placing orders.

For product questions or technical support, please contact: CustomerService@vevor.com

This is the original instruction manual. Please read all instructions carefully before operating. VEVOR reserves the right to interpret this user manual. The appearance of the product is subject to the item received. VEVOR will not provide further notification for technology or software updates.

Safety Precautions

When using electrical appliances, basic safety precautions must be followed:

• ? For your safety, always read the instruction book carefully before using.
• 〰️ This appliance uses alternating current.
• ? Connect an earth terminal to the ground.
• 1. READ ALL INSTRUCTIONS.
• 2. Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning.
• 3. Ensure the specified supply voltage is consistent with your power supply (AC only).
• 4. This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning safe use and understand the hazards involved.
• 5. Children shall not play with the appliance. Cleaning and user maintenance must not be performed by children without supervision.
• 6. To protect against electrical hazards, do not immerse the Drink Mixer in water or other liquids.
• 7. Avoid contact with moving parts.
• 8. Do not operate the Drink Mixer or any other electrical equipment with a damaged cord or plug, or after the unit malfunctions or is dropped or damaged. Return it to an authorized service facility for examination, repair, or adjustment.
• 9. Do not use outdoors. FOR HOUSEHOLD USE ONLY.
• 10. Do not let the cord hang over the edge of the table or counter or touch hot surfaces.
• 11. Store this instruction manual in a safe place. Do not discard.
• 12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• 13. Electric Shock Danger! Non-professional personnel are forbidden to repair the products. Repairs should be performed by qualified maintenance personnel.
• 14. WARNING! Do not put the main body of the machine and the power cord into any liquid. The machine must be fully cool before cleaning.
• 15. Do not place the product directly on or near a heat source. If the product catches fire, do not use water to extinguish; use a wet cloth to cover the fire site.
• 16. Ensure the plug is fully inserted into the socket to prevent overheating and burning due to poor contact.
• 17. Do not leave the product unattended while in operation. If the machine is overheating, stop working immediately and unplug the power.

SAVE THESE INSTRUCTIONS.

Product Specifications

Parts and Feature

Explanation of the Product's components:

• 1. Control Switch
• 2. Cup Actuator (ON/OFF)
• 3. Cup Support
• 4. Mixing Cup
• 5. Solid Disk Agitators
• 6. Moving-Wing Agitators
• 7. POWER ON/OFF (at Back)

Diagram Description: The diagram shows the VEVOR Electronic Drink Mixer with its main components labeled. It displays single, double, and triple-head units, along with individual parts like the mixing cup, cup support, and agitators. The control panel with speed settings and timer is visible at the top.

Operating the Drink Mixer

The Drink Mixer features an automatic ON/OFF button (Cup Actuator #2) that starts the motor when a mixing cup is correctly positioned on the Cup Support (#3). The Cup Support has two steps. For the automatic ON/OFF to activate, the bottom of the mixing cup must rest securely on the upper step of the Cup Support, and the top rim of the cup must be behind the front tab of the Cup Actuator. The motor operates as long as the cup is in place and activates the actuator. Removing the cup stops the motor.

The main Power ON/OFF button (#6) is located on the back of the unit.

Control Switch (#1)

The 3-speed button controls the operating speed: LO, MED, or HI. Use HI speed for heavy drinks and LO speed for lighter drinks with more liquid.

The drink mixer can also be operated using the PULSE button without engaging the automatic cup actuator. The PULSE button operates at the speed set by the 3-speed button and only while depressed. Keep a firm grip on the cup when using PULSE.

Agitator Replacement

To change agitators (#5/6): Hold the spindle shaft with one hand and turn the agitator clockwise. This loosens the screw. Unscrew and remove the old agitator. Insert the replacement agitator and screw it back in. Use only a standard metal mixing cup with the standard agitator.

Key Button Functions and Timer Settings

Key Buttons:

• 1. UP Button (↑):
  • a. Scrolls up to set time. Holding down advances time by 10 seconds per second. A single press advances time by 1 second.
  • b. Turns timer On/Off. Pressing rapidly 3 times turns the timer OFF (displays "---"). Pressing UP or DOWN again turns it back on.
• 2. DOWN Button (↓):
  • a. Scrolls down to set time. Holding down decreases time by 10 seconds per second. A single press reduces time by 1 second.
  • b. To set the countdown timer, hold the DOWN button for over 3 seconds to enter SET mode (display shows S0:00).
• 3. Speed Button:
  • a. Cycles through speeds: Lo, Hi, Med. Three presses return to Lo.
• 4. Pulse/STOP Button (▶️/⏹️):
  • a. Press and hold to run the mixer at the set speed until released.
  • b. Stops the motor if the Cup Actuator is engaged. Re-pressing restarts the motor.

Timer Range: 0:01-9:59

TIMER SETTING

To activate the timer, press UP or DOWN once. The timer will display (R0:00). To deactivate, press UP 3 times rapidly.

Manual COUNTDOWN Timer Setting:

1. Activate Timer (R0:00).
2. Press and hold DOWN for 3 seconds to enter SET mode (display blinks, S0:00).
3. Use UP and DOWN buttons to set the desired time.
4. Wait 5 seconds for the time to be set.
5. To reset time, press and hold UP and DOWN buttons simultaneously for 3 seconds.

Auto SAVE Timer SETTING:

1. Activate Timer (R0:00).
2. Place cup and actuate Motor; timer begins to count up.
3. Remove cup when desired consistency is reached.
4. Press and hold UP for 3 seconds to set the time, OR replace the cup within 10 seconds to continue the count.

NOTE: If the cup is removed during countdown or count-up, the timer pauses and blinks for 10 seconds. Replacing the cup within 10 seconds resumes the count; otherwise, the timer returns to the set time.

Timers may need to be set individually if multiple timers are present. The Drink Mixer timer can be programmed manually or set during operation.

Cleaning

• TURN UNIT OFF USING THE POWER SWITCH ON THE BACK, OR UNPLUG THE MIXER POWER CORD FROM THE ELECTRICAL OUTLET.
• DO NOT PUT IT IN THE DISHWASHER.
• DO NOT IMMERSE THE APPLIANCE IN WATER OR OTHER LIQUID.
• 1. To clean the drink mixer, wipe with a damp cloth or sponge. Do not use abrasive cleaners.
• 2. To clean the mixing shaft, place 200ml warm, soapy water in a Mixing Cup, place it on the mixer, and run on LO speed for 30 seconds (empty cup). Turn the unit OFF when finished.
• 3. Repeat Step 1 with warm water only to rinse the mixer shaft.
• 4. With the unit OFF and unplugged, wipe residual soap and water from the mixing shaft with a damp cloth or sponge.
• 5. The Mixing Cup should be washed in warm, soapy water or in a dishwasher.

Helpful Hints

• 1. Always turn the unit off or unplug the Drink Mixer before disassembling or assembling parts.
• 2. Keep all instructions and service information in a safe and handy place.
• 3. If using ice, only use crushed ice.
• 4. Clean the Drink Mixer thoroughly before initial use.
• 5. Keep mixing cups clean. Wash, rinse, and sanitize thoroughly after use.
• 6. Ensure all detachable parts are fastened tightly before operating.
• 7. Operate the Drink Mixer only when it is fully assembled.
• 8. To avoid splashing drinks of thin consistency, operate on Speed LO.

Any other servicing should be performed by an authorized service representative.

Troubleshooting Guide

Made In China