GODMORGON
By IKEA
Important Safety Information
Assembly should be carried out by a qualified person. Incorrect assembly may lead to the furniture tipping over, causing injury or damage. As wall materials vary, screws for fixing to wall are not included. For advice on suitable screw systems, contact your local specialized dealer.
Tools Required for Assembly
The following tools are recommended: Screwdriver, Pencil, Spirit Level, Tape Measure, Drill. It is advisable to have two people for assembly.
Parts Included
- 8x Screw (Part No. 112996)
- 2x Round component (Part No. 153804)
- 2x Bracket (Part No. 153646)
- 2x Bracket (Part No. 153647)
- 8x Dowel (Part No. 101375)
- 4x Screw (Part No. 113006)
- 8x Screw (Part No. 108442)
- 4x Cam lock fitting (Part No. 102509)
- 2x Wall mounting bracket (Part No. 128436)
- 2x Wall mounting bracket (Part No. 119509)
- 2x Wall mounting bracket (Part No. 121184)
- 2x Wall mounting bracket (Part No. 190527)
Assembly Steps
Step 1: Attach Brackets to Base
Attach two brackets (Part No. 153646) to the base panels using four screws (Part No. 113006). Ensure the brackets are oriented correctly as shown in the diagram.
Step 2: Assemble Main Frame
Connect the side panels to the base panel. Insert eight dowels (Part No. 101375) into the designated holes. Secure the panels using eight screws (Part No. 112996).
Step 3: Attach Side Panels
Insert four dowels (Part No. 101375) into the side panels. Attach the side panels to the base and back panels. Secure with four screws (Part No. 113006).
Step 4: Install Cam Lock Fittings
Insert four cam lock fittings (Part No. 102509) into the pre-drilled holes on the side panels. Turn them to lock the panels together.
Step 5: Secure Back Panel
Slide the back panel into the grooves of the assembled frame. Ensure it is seated correctly.
Step 6: Attach Top Panel
Place the top panel onto the assembled unit. Secure it using eight screws (Part No. 112996).
Step 7: Finalize Cam Locks
Ensure all four cam lock fittings (Part No. 102509) are fully tightened to secure the structure.
Step 8: Attach Base Components
Attach the two round components (Part No. 153804) to the bottom of the unit using four screws (Part No. 108442).
Step 9: Install Drawer Runners
Attach the drawer runners (Part No. 153647) to the inside of the cabinet sides. Use two screws (Part No. 101375) for each runner. Ensure they are level and parallel.
Step 10: Install Drawer Runners (Continued)
Continue attaching the remaining drawer runners to the cabinet sides as shown in the diagrams.
Step 11: Mark for Wall Mounting
Measure and mark the wall for mounting the cabinet. Use a spirit level to ensure accuracy. The diagram indicates a 50 mm (2") measurement for positioning the mounting points.
Step 12: Secure to Wall
Drill holes in the wall at the marked locations. The diagram shows drilling a Ø 5 mm (3/16") hole for wall anchors. Insert appropriate wall anchors (not included). Attach the cabinet to the wall using the provided wall mounting brackets (Part No. 128436, 119509, 121184, 190527) and screws (Part No. 108442). Ensure the cabinet is securely fastened to prevent tipping. The diagram shows correct (STOP symbol) and incorrect wall fixing methods.
