Components for system solutions

MCB Miniature circuit breaker

Model: 8530/1-MCB-STA102-B20-000-2

Art. No.: 293919

Product Description

R. STAHL 8530 series miniature circuit breakers are overcurrent devices that also provide good current limiting for short circuits and a high switching capacity of 10, 15 or 25 kA. This results in a low load on cables and a high selectivity for upstream fuses. The components have a modular design and are therefore available in 1- to 4-pole versions and for rated currents of 0.5-63 A. The maximum installation capacity is 4.5 subunits.

Key Features:

Isolation function in accordance with EN60947-2
Energy limitation class 3
Simple replacement or expansion of your system thanks to a modular circuit breaker design
Simple installation - snaps onto the mounting rail in Ex e enclosures
Non-adjustable thermal and magnetic releases
Ergonomically shaped operating lever for safe switching on and off
Padlocks (Accessories) provide protection against being switched on again during maintenance work

Technical Data

Explosion Protection

Application range (zones)	1, 2
Application range (Zone) note	For use in Zone 21/22 when protected by Ex tb/tc enclosure
IECEx gas certificate	IECEx FMG 19.0029U
IECEx gas explosion protection	Ex db eb IIC Gb
ATEX gas certificate	FM19ATEX0191U
ATEX gas explosion protection	II 2 G Ex db eb IIC Gb
Certificates	ATEX (FM), Brazil (ULB), China (CQST), IECEx (FM)
Declaration of conformity	Certificate of conformity (ATEX)

Electrical Data

Rated operational voltage AC	230/400 V
Rated operational current	20 A
Frequency	50/60 Hz
Rated switching capacity	10 kA
Electrical service life	2 x 10⁴
Mechanical service life	2 x 10⁴
1st auxiliary function	without
1st auxiliary function for AC rated voltage	-
1st auxiliary function for rated current max.	-
2nd auxiliary function	without
2nd auxiliary function voltage max. DC	-
Tripping characteristic	B
No. of poles	2-pole

Ambient Conditions

Ambient temperature	-40 °C ... 70 °C
Ambient temperature	-40 °F ... 158 °F
Ambient temperature note	Deviating ambient temperatures based on current certificates available on request

Mechanical Data

Degree of protection (IP) (IEC 60529)	IP2X
Enclosure material	Thermoplast
Connection cross section min.	1.5 mm²
Connection cross-section max.	25 mm²
Connection cross-section AWG min.	16 AWG
Connection cross-section AWG max.	4 AWG
Connection cross-section 2 min.	1.5 mm²
Connection cross-section 2 max.	10 mm²
Connection cross-section 2 AWG min.	16 AWG
Connection cross-section 2 AWG max.	8 AWG
Min. tightening torque	2 N·m
Max. tightening torque	3 N·m
Connection cross-section note	2-conductor connection (upper and lower chamber at the same time): upper and lower chamber max. 16/10 mm² (A maximum difference of one cross section may be clamped between the upper and lower chamber.) The permitted combinations of connection cross-sections can be found in the operating instructions.
Width	65 mm
Width, inches	2.56 in
Length	165 mm
Length in inches	6.5 in
Mounting depth	138.3 mm
Mounting depth in inches	5.44 in
Weight	1 kg
Weight	2.205 lb

Mounting / Installation

Tightening torque	2-3 N·m
Tightening torque lbf in	17.7 to 26.6 lbf-in
Tightening torque auxiliary contact	0.4 - 0.6 N·m
Tightening torque auxiliary contact lbf in	3.5 to 5.3 lbf in

Technical Drawings

Tripping Characteristic B:

A graph illustrates the tripping time in seconds against the multiple of rated current for both AC and DC, with a tripping curve from a cold state. The graph shows that for a B characteristic, tripping occurs at approximately 3-5 times the rated current.

Dimensional Drawings: (All Dimensions in mm [inches])

Main Unit: Shows a 2-pole miniature circuit breaker with dimensions: Width 65 mm [2.56 in], Length 165 mm [6.50 in], Height 91.50 mm [3.60 in], Mounting Depth 138.3 mm [5.44 in].
Pitch: The unit has 2 horizontal pitches.

Accessories

4-way locking device

A lock-out/tag-out hasp for individually locking the component using up to four cylinder locks.

Art. No.: 227232

Cylinder lock

For closing (bracket Ø 3)

Art. No.: 107115

Fastening set

A fastening set for fastening the component on the mounting plate without a DIN rail.

Art. No.: 276618

Note

R. STAHL reserves the right to make alterations to the technical data, dimensions, weights, designs and products available without notice. The illustrations cannot be considered binding.

	R. STAHL 8530/1-MCB-STA102-C20-000-2 Miniature Circuit Breaker - Technical Specifications Detailed technical specifications for the R. STAHL 8530/1-MCB-STA102-C20-000-2 miniature circuit breaker, including explosion protection, electrical data, mechanical data, and accessories. Suitable for system solutions and hazardous environments.
	R. STAHL 8530/1-MCB-STA102-B20-000-2 Miniature Circuit Breaker - Technical Specifications Detailed technical specifications for the R. STAHL 8530/1-MCB-STA102-B20-000-2 Miniature Circuit Breaker, including features, technical data, dimensions, and accessories. Suitable for use in hazardous environments.
	R. STAHL 8530/1-MCB-STA102-B20-000-2 Circuit Breaker: Technical Specifications and Features Detailed technical specifications for the R. STAHL 8530/1-MCB-STA102-B20-000-2 circuit breaker, including features, electrical characteristics, mechanical specifications, and explosion protection details. Suitable for industrial applications.
	R. STAHL 8530/1-MCB-STA102-B25-000-2 Miniature Circuit Breaker Technical Data Detailed technical specifications and features of the R. STAHL 8530/1-MCB-STA102-B25-000-2 miniature circuit breaker, including explosion protection, electrical data, mechanical data, and accessories.
	R. STAHL LS Miniature Circuit Breaker 8530/1-MCB-STA102-C25-000-2: Technical Data and Features Detailed technical specifications and features of the R. STAHL 8530/1-MCB-STA102-C25-000-2 miniature circuit breaker, including explosion protection, electrical data, mechanical data, and accessories. Suitable for Zone 1, 2, 21, and 22 hazardous areas.
	R. STAHL 8530/1-MCB-STA102-B10-000-2 Miniature Circuit Breaker - Technical Specifications Detailed technical specifications for the R. STAHL 8530/1-MCB-STA102-B10-000-2 miniature circuit breaker, including electrical data, explosion protection, mechanical data, and accessories. Features good current limitation, high breaking capacity, and modular design for various applications.
	R. STAHL 8530/1-MCB-STA102-B16-000-2 Miniature Circuit Breaker - Technical Data and Specifications Detailed technical specifications for the R. STAHL 8530/1-MCB-STA102-B16-000-2 miniature circuit breaker, including explosion protection, electrical data, mechanical data, and accessories. Features include isolation function, energy limitation class 3, and modular design for system solutions.
	R. STAHL 8530/1-MCB-STA103N-C10-000-4 Miniature Circuit Breaker - Technical Data and Specifications Detailed technical specifications for the R. STAHL 8530/1-MCB-STA103N-C10-000-4 miniature circuit breaker, including explosion protection, electrical data, mechanical data, and accessories. Suitable for system solutions in hazardous environments.