Etac Pinch Protection Assembly Instructions for Prio Wheelchair

Parts Included

1x Main Bracket
2x Pinch Protection Guards
4x Fasteners (Type A)
4x Fasteners (Type B)

Assembly Steps

Step 1

Identify the mounting location on the wheelchair frame for the pinch protection assembly.

Step 2

Attach the main bracket to the wheelchair frame using two (2) Type A fasteners. Ensure the bracket is oriented correctly as shown in the diagram.

Step 3

Prepare the pinch protection guards. Two identical guards are provided.

Step 4

Attach the pinch protection guards to the main bracket using two (2) Type B fasteners for each guard (total of four fasteners). Ensure the guards are positioned to cover the pinch points.

Step 5

Further secure the main bracket assembly to the frame using the remaining two (2) Type A fasteners.

Step 6

Confirm the correct positioning and attachment of the pinch protection guards. The guards should fit snugly against the bracket.

Step 7

The pinch protection is now fully installed on the wheelchair.

Manufacturer Information

Etac Supply Center AB

Långgatan 12

SE-334 33 Anderstorp

www.etac.com

Certifications: CE, MD (Medical Device)

	Etac Prio Back Support Cover Assembly Instructions Concise assembly instructions for the Etac Prio back support cover with Velcro attachment, detailing steps and manufacturer information.
	Etac Prio Wheelchair Combination Guide: Twist/Twist R Setup Detailed guide for combining the Etac Prio wheelchair with Twist/Twist R components, covering rear position adjustments, wheel configurations, and Klaxon cross beam selection for optimal setup.
	Etac Cross & Prio Sidepuder: Produktinformation og Udskiftning Information vedrørende udgåen af Etac Cross & Prio sidepuder (varenummer 28021) og introduktion af erstatningsvarenumre (63271-1, 63271-2, 63372-1, 63372-2). Lær om produktændringer fra Etac.
	Produktinformation: Etac Cross & Prio Standard Sædepude Lang med Tidy Betræk Udgår Information om udgåelse af Etac Cross & Prio standard lang sædepude med Tidy betræk. Lister alternative eksisterende varenumre til den korte version.
	Etac Cross 5 Active Assembly Instructions and Anti-Tip Device Installation Step-by-step assembly instructions for the Etac Cross 5 Active and its anti-tip device, including part identification, correct installation procedures, and torque specifications. Suitable for Etac Cross 5 wheelchairs.
	Produktinformation: Etac Sidostödsinlägg fasas ut och ersätts Information om Etac sidostödsinlägg artikel 28021 som fasas ut och ersätts av nya artiklar för Prio och Cross modeller. Inkluderar ersättningsartiklar och leveransdatum.
	Etac 27151 Locking Mechanism Assembly Instructions Step-by-step assembly instructions for the Etac 27151 locking mechanism, detailing how to secure components using the provided strap and buckle system.
	Etac Wheelchair User Manual: Cross, Cross XL, Twin, Transit Comprehensive user manual for Etac Cross, Etac Cross XL, Etac Twin, and Etac Transit wheelchairs, covering setup, operation, maintenance, and troubleshooting.

Etac Pinch Protection Assembly Instructions