INOI iPad Pro 128GB 4G Wi-Fi+LTE User Guide

Product Overview

The INOI iPad Pro is a versatile tablet designed for connectivity and performance. It supports 4G and Wi-Fi for seamless internet access.

Technical Specifications

Frequency Bands:

• GSM 900: 880 MHz to 915 MHz
• GSM1800: 1710 MHz to 1785 MHz
• WCDMA Band VIII: 882.4 MHz to 912.6 MHz
• LTE Band 1: 1920 MHz to 1980 MHz
• LTE Band 3: 1710 MHz to 1785 MHz
• LTE Band 7: 2500 MHz to 2570 MHz
• LTE Band 8: 880 MHz to 915 MHz
• LTE Band 20: 832 MHz to 862 MHz
• WLAN 802.11b/g/n20: 2412 to 2472MHz
• WLAN 802.11n40: 2422 to 2462MHz
• WLAN 802.11a/n20/n40/ac20/ac40/ac80: 5150 to 5250 MHz
• WLAN 802.11a/n20/n40/ac20/ac40/ac80: 5725 to 5850 MHz
• Bluetooth: 2402 MHz to 2480 MHz
• GPS: 1575.42MHz
• GLONASS: 1602 MHz
• BDS: 1561.098MHz
• FM: 87.5 MHz to 108 MHz

Transmit Power Range(s):

• GSM 900: 33.82dBm
• GSM1800: 31.34dBm
• WCDMA Band VIII: 23.02 dBm
• LTE Band 1: 23.69 dBm
• LTE Band 3: 23.09 dBm
• LTE Band 7: 21.86 dBm
• LTE Band 8: 23.58 dBm
• LTE Band 20: 23.59 dBm
• 2.4G WLAN: 16.86 dBm
• 5G WLAN: 16.19 dBm
• 5.8G WLAN: 13.91 dBm
• BT EDR: 4.59 dBm
• BT BLE: 8.82 dBm

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) Information

This TABLET meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: smart phone (FCC ID: 2A9SN-T107) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the body is 1.409W/kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0 mm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Warranty Card

INOI service centers are recommended for faster service. For addresses and hours, visit inoi.com/sc. For issues with authorized service centers, contact 24@inoi.com. The warranty is electronic; a filled warranty card or receipt is not required.

Warranty Terms: The consumer is entitled to free repair at an authorized service center if a constructive or manufacturing defect is found within the warranty period. The product warranty is 12 months from the date of purchase, but within the product's service life. The warranty for the supplied battery charger is 6 months from the date of purchase, but within the product's service life. The service life of the product, including any supplied battery, charger, memory card, and active auxiliary audio/media devices, is 24 months from the date of manufacturing. The warranty does not cover cases, bags, holders, removable panels, cables, self-installed software, and other accessories. Warranty service is provided by an authorized service center only if the user has the original warranty card, filled with the seller's company stamp and proof of purchase. The warranty period will be extended by the duration of warranty repairs. The warranty may be voided due to: mechanical, electrical, or thermal effects; exposure to liquids or condensate; improper use, including with non-original accessories; unauthorized opening, repair, alteration, or improper software installation; virus attacks or use of unlicensed software; damage to protective seals, belts, stickers, etc.; actions of third parties, force majeure, improper storage, or transport rules. Detailed terms are available at inoi.com/lw.