INOI A34 128+3GB Quickstart Guide

Getting Started

Volume Control ⚙️

Use the physical volume buttons on the side of your INOI A34 to adjust the audio, ringer, and notification volumes.

Visual: A diagram illustrating the side of a smartphone, with arrows pointing to the physical volume up and volume down buttons, indicating their function for controlling audio, ringer, and notification volumes.

Powering On ⚡

Press and hold the power button (located on the side of the device) to turn your INOI A34 on.

Visual: A diagram showing the side of a smartphone, with an arrow pointing to the power button, indicating that pressing and holding it turns the device on.

INOI App Features

The dedicated INOI app provides enhanced control over your smartphone's cooler function.

Visual: A graphic depicting a smartphone screen with a distinct app icon, representing the INOI application used for controlling smartphone cooler functions.

Hardware Setup

SIM and MicroSD Card Installation ?️

Your INOI A34 supports Nano SIM cards and MicroSD cards for expanded storage.

To install or replace SIM cards:

• Locate the SIM tray on the side of the device.
• Use the provided special key (SIM ejector tool) to open the SIM tray.
• Install one or two Nano SIM cards as needed.

To increase storage capacity:

• Instead of a second SIM card (in the SIM1 slot), you can insert a MicroSD card.
• The device supports MicroSD cards up to 128GB.

Visual: A detailed illustration of a SIM card tray, showing the slots for two Nano SIM cards and one MicroSD card, with instructions on how to insert them.

Charging and Connectivity

USB Type-C Charging ?

Charge your INOI A34 and connect accessories using the USB Type-C port.

The adapter specifications are: Input: 100-240V~50/60Hz 0.35A, Output: 5V, 2A.

Visual: A clear depiction of a USB Type-C connector, highlighting its use for charging and connecting accessories.

Regulatory and Safety Information

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received. Any modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting/relocating the antenna, increasing separation between equipment and receiver, or connecting to a different circuit. Consult a dealer or technician for help.

Specific Absorption Rate (SAR) Information

The SAR limit in the USA (FCC) is 1.6 W/kg averaged over one gram of tissue. The INOI A34 (FCC ID: 2A9SNA340) has been tested against this limit. The highest reported SAR value for ear use is 0.837W/kg, and for body-worn operation is 1.357W/kg.

Body-Worn Operation

For compliance with RF exposure requirements, maintain a minimum separation distance of 10mm between the user's body and the handset. Use accessories that maintain this distance. Avoid accessories with metallic components. Use only the supplied or an approved antenna.

CE Maintenance and Safety ⚠️

Hearing Safety: Use earphones and headphones with care, as excessive sound pressure can cause hearing loss. Do not listen at high volume levels for long periods.

Battery Safety: Risk of explosion if the battery is replaced with an incorrect type. Dispose of used batteries according to instructions.

Connectivity: The product shall only be connected to a USB Type-C interface. The adapter should be installed near the equipment and easily accessible.

Operating Temperature: The EUT (Equipment Under Test) operating temperature range is 0°C to 40°C.

Declaration of Conformity

INOI Limited declares that this Smart phone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Visual: The CE mark (CE), signifying that the product conforms to European health, safety, and environmental protection standards.