INOI A54 4+256GB Quickstart Guide

Getting Started with Your INOI A54

This guide provides essential information for setting up and using your INOI A54 smartphone.

Basic Operations

Volume Control: Adjust audio, ringer, and notification volumes using the volume buttons.

Powering On: Turn on your INOI device by pressing and holding the power/off button.

INOI App: Use the INOI app to manage your smartphone's features, including its cooling system.

Charging and Connectivity: Charge your INOI and connect accessories using the USB Type-C port.

Audio Output: Connect headphones using the 3.5mm jack.

SIM Card Installation: To install one or two Nano SIM cards, gently pull the tab on the lower right corner of the device cover to remove it.

Memory Expansion: Insert a microSD card (up to 128GB) to expand your device's memory.

Important Information

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any received interference. Modifications not expressly approved by the responsible party may void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer or technician.

Specific Absorption Rate (SAR) Information

The INOI A54 (FCC ID: 2A9SNA540) meets government requirements for radio wave exposure. The SAR limit in the USA (FCC) is 1.6 W/kg averaged over one gram of tissue. The highest reported SAR values during certification were 1.196 W/kg for ear use and 1.186 W/kg for body-worn use (tested at 10mm from the body). To maintain compliance with FCC RF exposure requirements, use accessories that ensure a 10mm separation distance between the user's body and the handset. Avoid accessories with metallic components. Use only supplied or approved antennas.

Body-worn Operation: For body-worn operations, maintain a minimum 10mm separation distance between the user's body and the handset, including the antenna. Third-party accessories should not contain metallic components. Use only supplied or approved antennas.

CE Maintenance and Safety

Hearing Protection: Use earphones and headphones with caution, as excessive sound pressure can cause hearing loss.

Battery Safety: Risk of explosion if the battery is replaced with an incorrect type. Dispose of used batteries according to instructions.

Connectivity: The product must only be connected to a USB Type-C interface.

Adapter Placement: The adapter should be installed near the equipment and easily accessible.

Operating Temperature: The EUT (Equipment Under Test) operating temperature range is 0°C to 40°C.

Power Specifications: The adapter input is 100-240V~50/60Hz 0.35A, and the output is 5V, 2A.

RF Compliance: The device complies with RF specifications when used at 10mm from the body.

Volume Levels: To prevent hearing damage, do not listen at high volume levels for extended periods.

Indoor Use Restriction: Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

This product may be used in European member states subject to restrictions, particularly for wireless access systems (WAS) and radio local area networks (RLANs) operating in the 5.150 to 5.250 GHz frequency band, which are restricted to indoor use.

[Warning] The following European countries have specific usage restrictions: AT, BE, BG, CH, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR.

Declaration of Conformity

INOI Limited declares that this Smart phone complies with the essential requirements and other relevant provisions of Directive 2014/53/EU, in accordance with Article 10(2) and Article 10(10).