CNC4PC C86MASSO-G3 User's Manual Ver. 1
Document Version: VER.1 | Board Revision: Rev. 2 | Date: JUNE, 2020
User's Manual Table of Contents
Contents
- 1.0 OVERVIEW
- 2.0 FEATURES
- 3.0 BOARD DESCRIPTION
- 4.0 TERMINAL POWER
- 5.0 CABLE DETECT JUMPER
- 6.0 PINOUT
- 7.0 WIRING EXAMPLE
- 8.0 DIMENSIONS
1.0 OVERVIEW
This board interface is used for the connection between MASSO-G3 CNC and C34 Board.
2.0 FEATURES
- Enable and disable the drives.
- RJ45 connectors for the axes.
- Electromechanical relay reflects the ACTIVE / FAULT Status of a servo.
- Power terminal (12VDC /24VDC).
- Status LEDs for fault axis and relay status.
3.0 BOARD DESCRIPTION
The board features several components and connectors. A green power terminal block is present, labeled 'POWER TERMINAL 12/24VDC'. A 'SELECT JUMPER' is indicated, with jumper positions labeled 'OFF ON'. An 'ELECTROMECHANICAL RELAY REFLECTS THE ACTIVE / FAULT STATUS OF A SERVO' is prominently displayed. Status indicator LEDs are present. Five 'AXES OUTPUT' RJ45 connectors, labeled X, Y, Z, A, and B, are arranged horizontally, each with associated jumper settings ('OFF ON').
4.0 TERMINAL POWER
Regulated +12VDC or +24VDC is required to power this board.
WARNING: Check the polarity and voltage of the external power source and connect the 12VDC and GND. Overvoltage or reverse-polarity power applied to these terminals can cause damage to the board, and/or the power source.
The power input is a green terminal block labeled 'POWER 12 GND 24U', with a further label 'POWER TERMINAL 12/24VDC'.
5.0 CABLE DETECT JUMPER
The system will detect a cable disconnect if a jumper is set to ON.
Jumper configurations for cable detection are illustrated:
- 1-2:OFF: For each of the five axes (X, Y, Z, A, B), the jumper is set to 'OFF' for pins 1-2.
- 2-3:ON: For each of the five axes (X, Y, Z, A, B), the jumper is set to 'ON' for pins 2-3.
6.0 PINOUT
The board provides five RJ45 connectors (RJ45_1 through RJ45_5) for axis output, each with associated jumper settings.
| RJ45 | PIN | P.P. PIN | RJ45 | PIN | P.P. PIN | RJ45 | PIN | P.P. PIN | RJ45 | PIN | P.P. PIN | RJ45 | PIN | P.P. PIN |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RJ45_1 | 1 | NC | RJ45_2 | 1 | NC | RJ45_3 | 1 | NC | RJ45_4 | 1 | NC | RJ45_5 | 1 | NC |
| 2 | Step X | 2 | Step Y | 2 | Step Z | 2 | Step A | 2 | Step B | |||||
| 3 | NC | 3 | NC | 3 | NC | 3 | NC | 3 | NC | |||||
| 4 | GND | 4 | GND | 4 | GND | 4 | GND | 4 | GND | |||||
| 5 | Err/res X | 5 | Err/res Y | 5 | Err/res Z | 5 | Err/res A | 5 | Err/res B | |||||
| 6 | Dir. X | 6 | Dir. Y | 6 | Dir. Z | 6 | Dir. A | 6 | Dir. B | |||||
| 7 | 12/24V | 7 | 12/24V | 7 | 12/24V | 7 | 12/24V | 7 | 12/24V | |||||
| 8 | 5V | 8 | 5V | 8 | 5V | 8 | 5V | 8 | 5V |
7.0 WIRING EXAMPLE
The wiring diagram illustrates a sample product application connecting the MASSO G3 controller, the C86MASSO board, and a C34 DYN4 AC Servo Drive. A 12/24VDC power supply is shown, along with a UTP cable connection. The MASSO G3 is also shown connected via USB. Key connections highlighted include STEP & DIR and ENABLE signals. The diagram includes company information:
CNC4PC
Integration Solutions for CNC Projects
http://www.cnc4pc.com
MASSO
www.masso.com.au
Note: This wiring is just to illustrate a sample product application. Specific wiring may vary from system to system. It is the user's responsibility to implement it correctly.
Details from the diagram: Designed: DOR, Date: JUNE-11-2020, Revise: YAC, Date: JUNE-11-2020, Item: WS_, Ver.: 2, Description: Wiring for MASSO G3 + C86MASSO + C34DYN4.
8.0 DIMENSIONS
The physical dimensions of the board are 5.2mm in height and 8.6mm in width. All dimensions are in Millimeters.
DISCLAIMER
Use caution. CNC machines can be dangerous machines. Neither DUNCAN USA, LLC nor Arturo Duncan are liable for any accidents resulting from the improper use of these devices. The M43 is not a fail-safe device and it should not be used in life support systems or in other devices where its failure or possible erratic operation could cause property damage, bodily injury or loss of life.
