Blaupunkt TIF 30 DA - 12V Tyre Inflator
Suitable for Car, Motorcycle, Bicycle and other Sports equipment
Multiple Adaptors Included
A visual representation of the Blaupunkt TIF 30 DA - 12V Tyre Inflator shows a compact, grey and black device with dual air compressors, a digital display, control buttons, and a cigarette lighter power plug. The text "Multiple Adaptors Included" is also visible.
Product Description
The tyre inflator features a Carry Handle, a Digital Gauge, an LED lamp, a Cigarette Lighter Adaptor, a Quick Release Nozzle connected to a Rubber Hose, and an ON/OFF Switch for the inflator and LED lamp.
Specifications
- Inflator with Digital Gauge & AutoStop
- Input: DC 12V
- Rated Power: 110W
- Rated Current: 10A
- Max Pressure: 150 PSI / 10.3 BAR
- Cylinder diameter: 30mm
- Max. Duty Cycle: 10 min
- Recommended for SUVs
- Function: Tyre inflator with PRESET & AUTOSTOP
- Additional Function: LED work light
- Power Cord length: 3 meters with cigarette lighter plug.
- Air hose: 50cm rubber hose with quick release valve connector
- Accessories: 2 nozzle adaptors & 1 sports equipment needle nozzle
Instructions
- Start the vehicle and insert the cigarette lighter adaptor into the 12V cigarette lighter outlet.
- The device comes with a 3-meter long Power Cord, making it convenient to connect to the front and back tyres. (Refer to Fig. 1 for connection illustration).
- Attach the Quick Release Nozzle to the valve stem of the tyre.
- Place the device on a preferably flat surface and set the preferred tyre pressure on the digital dial (Refer to Fig. 2).
- Turn on the inflator device. Ensure there are no leaks where the quick release nozzle meets the tyre valve stem.
- Once the desired tyre pressure is reached, the unit turns off automatically.
- This tyre pressure inflator is equipped with an LED light for convenient use at night.
- The device is designed to work for approximately 10-12 minutes (typical time to inflate 16"-19" tyres). It is suggested not to exceed this duration in a single continuous use. A 2-3 minute interval may be beneficial for long-term efficiency.
[Fig. 1] Illustrates the cigarette lighter adaptor being plugged into a vehicle's 12V power outlet.
[Fig. 2] Shows the digital gauge interface, displaying current air pressure, target pressure, and control buttons: a unit switch button, a '-' key, a '+' key, and a SET button.
[Fig. 3] Depicts the LED work light illuminating the area around the tyre valve.
Product Parameters
Parameter | Value |
---|---|
Input Voltage | DC 12V |
Power Cord Length | 3 Meters |
MAX Duty Cycle | < 10 min |
Power | 110W |
Cylinder Diameter | 30MM |
MAX Air Pressure | 150PSI |
Helpful Tips
- Do NOT keep the device near a heat source.
- Do NOT use this device near flammable liquids or gas sources.
- For servicing, please visit an Authorized Service Centre. Unauthorized servicing will void the warranty.
- This device is designed for 12V supply sources only. Do NOT use with 24V sources.
- The device is suitable for inflating tyres of all types of Cars, including SUVs.
- It is normal for the device to get hot during continuous use.
- It is recommended to use the device for tyre inflation within its suggested cycle time per use.
Included Accessories
The package includes: 1 spare fuse and 3 multi-function air inflator nozzles.
Visuals show the included accessories: a spare fuse, three different nozzle adaptors for various inflatables.
Steps for Changing Fuse
- Unscrew the top of the cigarette lighter adaptor.
- Remove the blown fuse and insert the spare fuse provided.
- Screw the top end of the cigarette lighter adaptor back on to ensure a tight seal.
Troubleshooting Guide
This section covers common problems users may encounter.
Nature of Problem | Cause and Recommended Solution |
---|---|
Device not working | Fuse is blown - replace fuse and check device. |
Device is operating erratically | The quick release valve connector is not securely attached to the valve stem, causing a leak and erratic readings. Release the connector from the valve stem and reconnect securely. |
The preferred tyre pressure was not preset correctly, causing the display to blink continuously. Turn off the device, set the preferred tyre pressure, and turn it ON again. |
Company Information
Distributed by BPIN Private Limited, 47, Atlanta Society, Nariman Point, Mumbai - 400 021, Maharashtra, India.
Toll Free: 1800 209 6820 | Email: info@blaupunktcar.in | Shop Online at www.blaupunktcar.in