Introduction
The NovaStar VX1000 is an advanced all-in-one controller designed for comprehensive video processing and control. It integrates multiple functionalities into a single unit, offering a powerful solution for various LED screen applications, from medium to high-end rental stages to fine-pitch LED screens.
With 10 Ethernet ports, the VX1000 supports multiple working modes including Video Controller, Fiber Converter, and Bypass. It is capable of driving LED screens with up to 6.5 million pixels and supports high-resolution 4K×1K@60Hz video signals. Key features include stepless output scaling, low latency, 3D capabilities, and pixel-level brightness and chroma calibration for superior image quality.
The VX1000 is designed to work seamlessly with NovaStar's software solutions, NovaLCT and V-Can, simplifying in-field operations such as screen configuration, Ethernet port backup, layer management, preset management, and firmware updates. This manual provides detailed information on the device's features, operation, and specifications.
Key Features
- All-in-one video processing and control unit
- 10 Gigabit Ethernet ports
- Supports Video Controller, Fiber Converter, and Bypass modes
- Drives up to 6.5 million pixels
- Processes 4K×1K@60Hz high-resolution video
- Features stepless output scaling, low latency, and 3D
- Pixel-level brightness and chroma calibration
- Compatible with NovaLCT and V-Can software
Applications
The VX1000 is versatile and can be used in various scenarios:
- As a video controller for managing LED screen content and display parameters.
- In Bypass mode for direct pixel-to-pixel display without processing.
- As a fiber converter for long-distance signal transmission.
For more detailed operational guidance and technical specifications, please refer to the full user manual available on the NovaStar website.
