NovaStar VX1000 Pro All-in-One Controller Specifications

Change History

Introduction

The VX1000 Pro is an all-in-one controller combining video processing and video control functionalities into a single device. Equipped with 10 Ethernet ports, it supports three working modes: video controller, fiber converter, and ByPass. Capable of managing up to 6.5 million pixels, the VX1000 Pro can output at a maximum width of 10,240 pixels and a height of 8,192 pixels, making it perfectly suited for controlling ultra-wide and ultra-high LED screens on-site.

The VX1000 Pro boasts powerful video signal reception and processing capabilities, supporting a maximum resolution of 4K*2K@60Hz for video input. It can handle multiple video signal inputs and includes features like 6 layers, output scaling, low latency and pixel-level brightness and chroma calibration. These functions combine to deliver outstanding image display quality.

With various control options available, the VX1000 Pro can be operated via the front panel knob, NovaLCT, Unico web page and VICP app, providing a convenient and effortless control experience.

The VX1000 Pro is housed in an industrial-grade casing, which, combined with its powerful video processing and transmission capabilities, makes it robust and well-suited for complex operational environments. The VX1000 Pro is a perfect fit for medium and high-end rental, stage control systems and fine-pitch LED screens.

Certifications

CE, FCC, IC, PSE, RCM, EAC, UL, CB, KC, RoHS

Features

Multiple connectors, free input and output

• A comprehensive range of input connectors:
  • 1x HDMI 2.0 (IN & LOOP)
  • 2x HDMI 1.3
  • 1x 10G optical fiber port (OPT 1)
  • 1x 3G-SDI (IN & LOOP)
  • 1x USB 3.0 (Play images or videos saved in a USB drive.)
• Output connectors:
  • 10x Gigabit Ethernet ports. A single device supports up to 6.5 million pixels, delivering a maximum width of 10,240 pixels and a maximum height of 8192 pixels.
  • 2x Fiber outputs. OPT 1 sends the output on Ethernet ports 1~10. OPT 2 copies or backs up the output on Ethernet ports 1~10.
  • 1x HDMI 1.3 for monitoring display.
  • 1x 3D connector to directly connect a third-party 3D emitter.
• Self-adaptive OPT 1 for either video input or sending card output: Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device.
• Audio input and output: Audio input accompanied with HDMI sources, and 3.5 mm independent audio input and output.
• Adjustable output volume.

Free topology

Flexible screen configuration without rectangle restriction on a single Ethernet port. The maximum circumscribed rectangle of the large screen loaded by the device must be within the device loading capacity. *Specific receiving cards are required.

Low latency

By enabling the low latency feature and ByPass mode, the device delay can be reduced to 0 frame.

Output synchronization

An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync.

EDID management

Import and export EDID files.

Diverse display possibilities for flexible configuration

• Easy preset saving and loading:
  • Up to 256 user-defined presets supported.
  • Load a preset by simply pressing one button.
  • Save, overwrite and delete a preset.
  • Preview the layer layout saved in the preset.
• Multiple layer display:
  • Supports 6*2K×1K layer resources.
  • Users can create layers in three different specifications – 4K×2K, 4K×1K, and 2K×1K. These layers will use 4x, 2x, and 1x 2K layer resources respectively, depending on the capacity of the input source connector used to open the layers.
  • Adjustable layer size and position
  • Adjustable layer priority
  • Adjustable aspect ratio
  • 3D function

Traditional solution: Connect the EMT200 Pro 3D emitter to the device's Ethernet port, and use the compatible 3D glasses to enjoy a 3D visual experience.

New solution: Connect the third-party 3D emitter to the device 3D connector and use the compatible 3D glasses to enjoy a 3D visual experience.

Note: When the 3D function is enabled and the video source format is Side-by-Side or Top-and-Bottom, the device output capacity will be halved.

Personalized image scaling

Supports three kinds of image scaling modes, including full screen, pixel to pixel and custom.

Powerful video processing

• Based on SuperView III image quality processing technologies to provide stepless output scaling.
• One-click full screen display.
• Free input cropping.

Color adjustment

Supports output color management, including brightness, saturation, contrast and hue.

Pixel level brightness and chroma calibration

Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality. The function of displaying image on screen for test is also supported.

USB playback, timesaving and effortless

Supports USB playback for instant plug-and-play convenience.

Multiple device modes and operation modes, convenient and efficient

• Various working modes:
  • Video controller
  • Fiber converter
  • ByPass
• Multiple control options:
  • Device front panel knob
  • Unico web page control
  • NovaLCT
  • VICP app

Data saving after power failure and backup design, stable and reliable

• End-to-end backup:
  • Backup between devices
  • Backup between input sources
  • Backup between Ethernet ports
  • Backup up between OPT and Ethernet ports
• Ethernet port backup test: Test whether the pre-stored images, backup Ethernet ports and devices take effect without plugging and unplugging the Ethernet cables.
• Data saving after power failure: After a normal shutdown or unexpected power outage, reconnecting the power will automatically restore the previously saved settings on the device.
• 24/7 rigorous stability test under extreme high and low temperatures proved robust stability and reliability.

Function limitations

Latency at the VX1000 Pro

Appearance

Front Panel

The front panel features an LCD screen for displaying device status, menus, and messages. A knob is used for menu navigation and parameter adjustment, with a press function to confirm settings. A back button allows exiting menus or canceling operations.

There are also layer buttons (LAYER 1-3) to open/close layers and control media playback. The SCALE button offers a shortcut for full-screen scaling. Input source buttons indicate input status and allow switching sources, with specific functions for U-DISK and MEDIA buttons. Function buttons include PRESET and TEST for accessing settings and test patterns.

The FREEZE button freezes/unfreezes the output image, and an FN button serves as a custom function button. A USB port connects to a PC with NovaLCT for device control and firmware updates.

Note: On the home screen, when layer 1 is opened, pressing the input source button allows quick switching of the input source for layer 1.

Rear Panel

The rear panel includes various connectors for control, Ethernet, audio, USB, RS232, GENLOCK IN-LOOP, LIGHT SENSOR, 3D, HDMI 2.0 (IN & LOOP), HDMI 1.3, and OPT 1/OPT 2. It also features a MONITOR output and a power input (100-240V~, 50/60Hz).

Status LEDs:

• Ethernet: Top left LED indicates connection status (On: connected, Flashing: not properly connected). Top right LED indicates communication status (On: no data communication, Flashing: good communication, Off: no data transmission).
• USB: 1x USB 2.0 for firmware updates and importing/exporting device logs and EDID files.
• RS232: 3-pin connectors for RX (Receive signals), TX (Send signals), and G (Ground).
• GENLOCK IN-LOOP: Connects to an external sync signal, accepting bi-level and tri-level signals. 'IN' accepts the sync signal, and 'LOOP' loops the sync signal.
• LIGHT SENSOR: Connects to a light sensor for automatic screen brightness adjustment.

Applications

The VX1000 Pro can be used in various applications, including controlling LED screens with different layer configurations (e.g., 4K Layer, 2K Layer). It can be connected to a Control PC, Router, SDI Source, and an LED Screen. The diagram illustrates a typical setup involving an Intelligent Central Control Server, Audio Console Source, and a PIXELHUE Switcher.

Dimensions

Device Dimensions

The device has dimensions of 482.6 mm (width) x 302.2 mm (height) x 79.0 mm (depth), with a tolerance of ±0.5 mm.

Flight Case Dimensions

The flight case has dimensions of 517.0 mm (width) x 471.0 mm (height) x 94.0 mm (depth), with a tolerance of ±5 mm.

Note: For detailed dimensions and drawings of the flight case, contact the NovaStar customer service team.

Specifications

Video Source Features

Note: The table above shows some common resolutions and integer frame rates only. The adaptation to decimal frame rates is also supported, including 23.98/29.97/59.94/71.93/119.88Hz.

Notes and Cautions

Notes For Battery

• The battery is not intended to be replaced.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

Notes for Installation

When the product needs to be installed on the rack, 8 screws at least M5*8 should be used to fix it. The rack for installation shall bear at least 16kg weight.

• Elevated Operating Ambient: If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
• Reduced Air Flow: Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.
• Mechanical Loading: Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.
• Circuit Overloading: Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
• Reliable Earthing: Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).

FCC Caution

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Others

• Note: This product can only be placed horizontally. Do not mount vertically or upside-down.
• This is Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.
• Please read the specifications thoroughly and use the product in accordance with the requirements. If you have any questions about the specifications, please contact NovaStar immediately. If the product is used improperly, not following the requirements, or for illegal purposes, the user shall be solely responsible for any consequences arising therefrom.

Copyright

Copyright © 2025 Xi'an NovaStar Tech Co., Ltd. All Rights Reserved.

No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi'an NovaStar Tech Co., Ltd.

Trademark: NOVA STAR is a trademark of Xi'an NovaStar Tech Co., Ltd.

Statement: Thank you for choosing NovaStar's product. This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. If you experience any problems in use or have any suggestions, please contact NovaStar via the contact information given in this document. NovaStar will do its best to solve any issues, as well as evaluate and implement any suggestions.

Official website: www.novastar.tech

Technical support: support@novastar.tech