Intex Quick-Fill™ Electric Air Pump

⚠️ WARNING

• Adult use only.
• Household use only.
• Do not drop unit into water or expose unit to rain or water.
• Do not direct air stream at face or body.
• Do not operate for more than 5 minutes at a time. Unplug and let cool at least 15 minutes.
• Unplug unit when not in use.
• Do not obstruct vent holes or open source.
• Do not insert objects into the inflation or deflation connector.
• The DC supply cord cannot be replaced. If the cord is damaged, the appliance should be scrapped.
• To reduce the risk of electric shock, do not expose to rain. Store indoors.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Suitable for inflating air mats, airbeds, inflatable pools and inflatable toys only.

Follow these rules and all instructions to avoid property damage, electric shock, burns or other injury.

⚠️ CAUTION

• To reduce the risk of electric shock, do not expose to rain. Store indoors.

Names of Parts

Diagram Description: The diagram shows the Intex Quick-Fill Electric Air Pump with its various components. It includes the main pump unit, inflation and deflation connectors, a switch, an AC adapter, a DC cigarette cord, multiple nozzles, and visible vent holes/slots.

Parts Description:

• 1. PUMP
• 2. DEFLATION CONNECTOR
• 3. INFLATION CONNECTOR
• 4. SWITCH
• 5. AC ADAPTER
• 6. DC CIGARETTE CORD
• 7. NOZZLES
• 8. VENT HOLES / SLOTS

Note: Drawings are for illustration purposes only and may not reflect the actual product. Not to scale.

Operating Instructions

Inflation

1. Attach nozzle to the inflation connector if necessary and hold pump against inflation valve on item to be inflated. (See Fig 1: Attach Nozzle). Note: Use the appropriate nozzle on small inflation valves, such as those on small air mattresses.
2. Power Connection:
   • For DC Power: Connect the end of the pump line cord to the DC cigarette cord (6) first, then plug the DC line cord into a car cigarette lighter outlet. (See Fig 2.1)
   • For AC Power: Connect the end of the pump line cord to the AC adapter (5) first, then plug the AC adapter into an AC electrical outlet (110-120V). (See Fig 2.2)
3. Switch Operation: Press "I" to SWITCH ON; Press "0" to SWITCH OFF. (See Fig 3: Switch)

Diagram Descriptions for Inflation:

Fig 1: Attach Nozzle - Illustrates attaching a nozzle to the inflation connector of the pump.

Fig 2.1 - Shows connecting the pump's power cord to the DC cigarette cord, ready for insertion into a car's cigarette lighter socket.

Fig 2.2 - Shows connecting the pump's power cord to the AC adapter, ready for insertion into a standard 110-120V electrical outlet.

Fig 3: Switch - Depicts the pump's switch with clear indicators for 'I' (ON) and '0' (OFF).

Deflation

1. Attach nozzle to the deflation connector if necessary and hold pump against inflation valve on item to be deflated. (See Fig 4: Attach Nozzle). Note: On large items like inflatable boats and large air mattresses, the pump can fit directly into the inflation valves for faster deflation. Use the appropriate nozzle for small inflation valves on small air mattresses, etc.
2. Power Connection: (Same as Inflation)
   • For DC Power: Connect the end of the pump line cord to the DC cigarette cord (6) first, then plug the DC line cord into a car cigarette lighter outlet. (See Fig 2.1)
   • For AC Power: Connect the end of the pump line cord to the AC adapter (5) first, then plug the AC adapter into an AC electrical outlet (110-120V). (See Fig 2.2)
3. Switch Operation: Press "I" to SWITCH ON; Press "0" to SWITCH OFF. (See Fig 3: Switch)

Diagram Descriptions for Deflation:

Fig 4: Attach Nozzle - Illustrates attaching a nozzle to the deflation connector of the pump.

The power connection (Fig 2.1, Fig 2.2) and switch operation (Fig 3) are the same as described in the Inflation section.

Maintenance Instructions

No specific air pump maintenance is required. The air pump has no user-serviceable parts.

Moving and Storage Instructions

Move the product, air pump, and accessories to the power source location. Ensure the power cord is free of twists, kinks, and knots. Fold the power cord loosely, and return the pump and nozzles to the package when not in use.

Compliance Information

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-3 (B)/NMB-3(B)