Monster N-Lite 212
Quick Start Guide
Product Overview
The Monster N-Lite 212 is a pair of wireless Bluetooth earbuds designed for portable audio. This guide provides essential information for getting started with your device.
Model Number: MH22230
What's Included
- Earphones x2 (Left & Right)
- Charging case x1
- USB-C cable x1
- Quick start guide and Warning card
Charging
Before using the Monster N-Lite 212, please connect the USB-C cable to a power adapter to begin charging. Fully charge the earphones and the charging case before the first use.
Diagram shows a USB-C port on the charging case.
Wearing
Place the Monster N-Lite 212 onto your ears and rotate to fit comfortably to get the best wearing and sound quality experience.
Diagram shows an earphone being placed in an ear and rotated for a comfortable fit.
Power On/Off
Open the charging case cover and remove the earphones; they will automatically turn on. To turn off the earphones, place them into the charging case and close the cover. The earphones will power off and charge simultaneously.
Pairing
Open the charging case and remove the earphones, which will automatically turn on. For new device connection, turn on Bluetooth on your device and choose "Monster N-Lite 212" from the Bluetooth list to connect. You will hear system prompts after the earphones are connected. If the earphones have been connected before, they will connect to the last connected device automatically after being turned on.
Operations
MFB (Multi-Function Button) Operation
| Action | Control |
|---|---|
| Answer/End Call | Double press L or R earphone MFB |
| Reject Call | Press and hold L or R earphone MFB for 2 seconds |
| Voice Assistant | Triple press L or R earphone MFB |
| Disconnect Phone | Double press L or R earphone MFB |
Diagrams illustrate pressing the MFB button on the earphone for different durations or number of times to control playback, calls, and voice assistant.
LED Indicator (Earphone)
| Status | Indicator |
|---|---|
| Power on | White flashes |
| Power off | Red light for 2s then turns off |
| Pairing successful | White flashes |
| Pairing timed out | Red light for 2s then turns off |
| Disconnect phone | White light for 1s then turns off |
| Low battery | Red light flashes slowly |
LED Indicator (Charging Case)
| Status | Indicator |
|---|---|
| Charging | Battery level digits on the display screen flash and increase. |
| Earphones Charging | Corresponding battery bar flashes from bottom to top; screen turns off when fully charged. |
Reset
In the power-on state, press the MFB of both earphones simultaneously 5 times. The earphones will automatically shut down to reset. Place the earphones in the charging case and then take them out; they will turn on automatically and enter pairing mode.
Diagram shows pressing the MFB button on both earphones simultaneously.
Attention
- Private replacement of batteries without permission is not recommended.
- Batteries [battery packs or battery combinations] should not be exposed to lighting, baking, or similar overheating environments.
- The input voltage and current standard ≤ 5V/1A when charging the charging compartment from an external power source.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and the receiver; Connect the equipment to an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2AVD2-MH22230
