MONSTER CHAMPION
Model No.: MH11903
Quick Start Guide
Please read this Quick Start Guide carefully and keep it for future use.
Product Overview
- Earphones (Left & Right)
- Charging Case
- SportClip™ x 1 Pair (Installed)
- Eartips x 3 Pairs (S, M & L)
- USB Type-C Charging Cable
- Quick Start Guide & Warranty letter
Component Identification
The earphones and charging case feature the following components:
- 1. SportClip™
- 2. Multi Function Button (MFB)
- 3. Charging Contacts
- 4. Eartips
- 5. Charging Case - Battery level LED Indicator
- 6. Charging Case Charging Port
Power On/Off
Take the earphones out of the charging case, and the earbuds will automatically power on. When the earbuds are powered on, place them into the charging case, and the earbuds can be powered off and charging.
Finding Your Fit
Experiment with the different sizes of ear tips to find your perfect fit.
The available ear tip sizes are: Large (L), Medium (M), and Small (S).
Twist the earphone until it fits securely and comfortably.
Pairing
Remove earphones from the charging case; they will turn on automatically. The left and right earphones will connect automatically. Wait a few seconds, and a "pairing" voice prompt will be heard. For new device connection, go to the Bluetooth settings on your mobile device and search for new devices (e.g., "Monster device"). Once the earphones are paired, you will hear "connected".
Volume Control
Volume down: Quickly double-press the MFB on the left earphone during music streaming.
Volume up: Quickly double-press the MFB on the right earphone during music streaming.
Calling
Answer/End Call: Short-press the MFB button to answer/end the phone call.
Reject Call: Long-press the MFB button for about 2 seconds to reject the phone call.
Music Control
Play/Pause: Press MFB once to play/pause music.
Track forward: Press and hold MFB on the right earphone for about 2 seconds.
Track backward: Press and hold MFB on the left earphone for about 2 seconds.
Voice Control
After connecting to the phone, quickly double-press the MFB to activate the voice assistant.
Reset
To manually reset the earbuds: Turn off both Right/Left earbuds. Simultaneously long-press both Right/Left earbuds for 8 seconds. You will see a blue LED indicator stay on for about 1 second, and hear the voice prompt "Toot toot". The earbuds will then reset automatically and enter TWS pairing mode for a few seconds, finally becoming available to connect with other devices.
LED Indicator Guide
| Status | DESCRIPTION | Voice Prompt |
|---|---|---|
| Power On | Blue LED indicator stays on for about 1 second | "Power On" |
| Power Off | Blue LED indicator stays on for about 1 second | "Power Off" |
| Pairing | Blue LED indicator flashes continuously | "Pairing" |
| Connect | LED indicator is off / goes out | "Connected" |
| Reset | Blue LED indicator flashes three times quickly | |
| Charging - Earphones | Blue LED indicator stays On | - |
| Charging - Charging Case | Battery level LED Indicator flashes while charging. When battery level LED indicator is off, it is fully charged. | - |
Caution
- When an earphone falls into water, please take it out, wipe it dry, and then put it into the charging box. Notice: Earbuds can be damaged if there is water on the earphone.
- Please fully charge before using.
- When you unbox the headphones and power them on for the first time, they will enter pairing mode automatically.
- Charge in a suitable place and environment.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
